Multilayer Ceramic Capacitors SOLUTIONS Electronic Components Capacitor Array C0G and X7R Dielectric, 10 – 200 VDC Why Choose KEMET Applications KEMET Electronics Corporation is a leading global supplier of electronic components. We offer our customers the broadest selection of capacitor technologies in the industry, along with an expanding range of electromechanical devices, electromagnetic compatibility solutions and supercapacitors. Our vision is to be the preferred supplier of electronic component solutions for customers demanding the highest standards of quality, delivery and service. • Telecommunications • Computers • Handheld devices • Automotive Electrical/Physical Characteristics Dielectric Case Sizes C0G 0508 / 0612 Tolerances Features & Benefits • Saves circuit board and inventory space • Reduces placement costs and increases throughput • Lead (Pb)-Free, RoHS and REACH compliant • EIA 0508 (2-element) and 0612 (4-element) case sizes • Capacitance offerings ranging from 330 pF – 0.22 µF • Non-polar device, minimizing installation concerns • 100% pure matte tin-plated termination finish allowing for excellent solderability • Flexible Termination option available • SnPb termination finish options available upon request (5% minimum) • Commercial and Automotive (AEC–Q200 grades available Voltage Options (VDC) Capacitance Values -55 to +125 10 – 200 10 pF – 2.2 nF -55 to +125 10 – 200 330 pF – 0.22 µF J = ±5% K = ±10% M = ±20% J = ±5% X7R 0508 / 0612 K = ±10% M = ±20% Ordering Information Ceramic Case Size Array (L”x W”)1 CA 06 Number of Capacitors Specification/ Series 4 C 05 = 0508 2 = 2 capacitors C = Standard 06 = 0612 4 = 4 capacitors X = Flexible Termination Product Checklist • What is the end application? • What are the dimensional requirements? • Do you have board space constrains? • What capacitance is required at operating temperature? • What is the application voltage at operating temperature? Temperature Range (°C) Capacitance Code (pF) Capacitance Tolerance Rated Voltage (VDC) Dielectric Failure Rate/ Design 104 K 4 R A Two significant digits plus number of zeros. J = ±5% K = ±10% M = ±20% 8 = 10 4 = 16 3 = 25 5 = 50 1 = 100 2 = 200 R = X7R G = C0G A = N/A Termination Finish2 Packaging/ Grade (C-Spec) C C = 100% Matte Sn L = SnPb (5% minimum Pb content) TU See “Packaging C-Spec Ordering Options Table” below All previous reference to metric case dimension “1632” has been replaced with an inch standard reference of “0612”. Please reference all new designs using the “0612” nomenclature. “CA064” replaces “C1632” in the ordering code. Additional termination finish options may be available. Contact KEMET for details. 2 SnPb termination finish option is not available on automotive grade product. 1 2 For more information, samples and engineering kits, please visit us at www.kemet.com or call 1.877.myKEMET. SA1015 Copyright © 2015 KEMET Multilayer Ceramic Capacitors SOLUTIONS Electronic Components Capacitor Array C0G and X7R Dielectric, 10 – 200 VDC Packaging C-Spec Ordering Options Table Packaging/Grade Ordering Code (C-Spec) Packaging Type Commercial Grade1 Not required (Blank) Bulk Bag TU 7” Reel / Unmarked Automotive Grade 3 7” Reel AUTO 13” Reel (Punched Paper) / Unmarked AUTO7411 13” Reel (Embossed Plastic) / Unmarked AUTO7210 Default packaging is “Bulk Bag”. An ordering code C-Spec is not required for “Bulk Bag” packaging. The terms “Marked” and “Unmarked” pertain to laser marking option of capacitors. All packaging options labeled as “Unmarked” will contain capacitors that have not been laser marked. 3 Reeling tape options (Paper or Plastic) are dependent on capacitor case size (L” x W”) and thickness dimension. See “Chip Thickness/Tape & Reel Packaging Quantities” and “Tape & Reel Packaging Information”. 3 All Automotive packaging C-Specs listed exclude the option to laser mark components. Please contact KEMET if you require a laser marked option. For more information see “Capacitor Marking”. 1 1 Dimensions – Millimeters (Inches) EIA Size Code Metric Size Code 0508 1220 L Length 1.30 (0.051) ±0.15 (0.006) 1.60 (0.063) 0612 1632 ±0.20 (0.008) SA1015 W Width BW Bandwidth BL Bandlength T Thickness P Pitch R Reference 2.10 (0.083) 0.53 (0.021) 0.30 (0.012) 1.00 (0.039) 0.50 (0.020) ±0.15 (0.006) ±0.08 (0.003) ±0.20 (0.008) See catalog table for Thickness ±0.10 (0.004) ±0.10 (0.004) 3.20 (0.126) 0.40 (0.016) 0.30 (0.012) 0.80 (0.031) 0.40 (0.016) ±0.20 (0.008) ±0.20 (0.008) ±0.20 (0.008) ±0.10 (0.004) ±0.05 (0.002) Copyright © 2015 KEMET