EARTH STATION ANTENNA 8.1 Meter Extended Azimuth ESA Like all ASC Signal earth station antennas, the 8.1Meter Earth Station Antenna provides high gain and exceptional pattern characteristics. This antenna system is designed to address the stringent requirements of both the television broadcast industry and telecommunications network operators who demand unsurpassed flexibility and electrical performance in high-quality, cost-effective, and reliable packages. The 8.1m antenna is offered with an extended AZ motorizable mount allowing 200o travel coverage. This antenna can be provided with the NGC motorization and/or the ASC Signal Sub-reflector tracking system SRT for Ka band application. The combination of the NGC and the SRT tracking system can allow the tracking on up to 6 axis. The electrical performance and exceptional versatility provides the ability to configure the antenna with your choice of combining network. That versatility is provided at the time of initial purchase, as well as in the future, as your satellite communication requirements evolve. Features • Rugged aluminum and steel construction This antenna system is used worldwide in broadcast applications and high density data, voice and communications networks. The ASC Signal 8.1 meter earth station antenna features a computeroptimized dual reflector Gregorian optics system and close-tolerance manufacturing techniques. • Superior Pointing Accuracy This combination provides extremely accurate surface contour resulting in exceptionally high gain and closely controlled pattern characteristics. ASC Signal earth station antennas provide maximum durability with minimal maintenance. • Monopulse Tracking Capabilities for Ka-Band • Advanced Gregorian optics • 3 Year Warranty on all Structural Components • >200o Continuous Azimuth Travel Range • Deep Equipment Enclosure • Low PIM Capabilities 1 PBESA81MEA.B All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0515A) © 2015 ASC Signal Corporation EARTH STATION ANTENNA 8.1 Meter Extended Azimuth ESA Design Standards Reflector Ground Mount Hardware Aluminum painted with highly diffusive white paint Hot-dipped galvanized steel, per ASTM-A123 for structural steel. Sizes ≤ 3/8 in (9.5mm), stainless steel, passivated per MIL-F-14072-E300 Sizes �≥ 3/8 in (9.5mm), hot-dipped galvanized stainless steel, passivated per ASTM-A123 Environmental Performances Operating Temperature -40o to 52oC (-40o to 125oF) Seismic (Earthquake) 1 G Vertical and Horizontal acceleration. Equivalent to a Richter Magnitude 8.3, and Grade 11 on the modified Mercalli Scale Operational Winds Survival Winds 45 mph (72 km/h) Gusts to 65 mph (105 km/h) 125 mph (200 km/h) in any position of operation Rain 4 in (102 mm) per hour Solar Radiation 360 BTU/hr/ft2 (1135 Watts/m2) Relative Humidity 100% Shock and Vibration As encountered by commercial Air, Rail and Truck shipment. Atmospheric Conditions As encountered by Moderately Corrosive Coastal and Industrial Areas. Mechanical Performances The 8.1m Antenna mechanical general specifications and performances are listed in below table. Additional information, dimensions and layout may be provided by ASC Signal on a case-by-case basis. Optics Type Reflector Material Reflector Segments Mount Type Dual Reflector Gregorian Precision-Formed Aluminum 20 El over Az, Pedestal Mount Antenna Pointing Range, Coarse/(Continuous) Elevation: 0-90o (90o) Azimuth: 200o (200o) Polarization 180o (180o) Hub/Enclosure Dimensions Diameter Depth 2.14 m (84 in) 1.17 m (45 in) Shipping Information Packing Options Standard Commercial Domestic Pack Ocean Export Pack - For non-containerized, packed for seal against salt water spray Air Export Pack - For freighter aircraft shipments. Lower deck AirPack requires specialized bids Container Packaging Required Shipping Container Standard 20 ft land/sea container Standard 40 ft land/sea container Included OCEANSHP-LG AIR EXPORT PACK-LG CNTPCK-LG Quantity 1 Quantity 1 Shipping container information is given for basic configuration and may vary depending on the selected options, please contact ASC Signal for specific container loading plan. 2 PBESA81MEA.B All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0515A) © 2015 ASC Signal Corporation Dimensional Drawings 35 30 25 Dimension (feet) EARTH STATION ANTENNA 8.1 Meter Extended Azimuth ESA A 20 B 15 C D 10 E 5 0 0 5 10 20 30 40 50 60 70 80 90 Elevation Angle (degrees) 3 PBESA81MEA.B All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0515A) © 2015 ASC Signal Corporation Typical Foundation Design 180 in Typical Foundation Information Note: Crane access is to be provided within 40ft (12m) of pads (based on 15 ton crane) 180 in 15ft (4.5m) minimum clearance 122 in Assembly area for mount and antenna 180 in. 48 ° 36 ° 30ft (9m) EARTH STATION ANTENNA 8.1 Meter Extended Azimuth ESA Azm = Azimuth direction of mount 20ft (6m) minimum clearance 2ft (0.6m) minimum clearance 36 ° 48 ° 180 in. 15ft (4.5m) minimum clearance 30ft (9m) 36 in 30ft (9m) minimum clearance on either side of foundation for crane access Foundation information are provided in bulletin 7579312, please contact ASC Signal. Soil Bearing Capacity, Reinforcing Steel, Concrete Compressive Strength, Foundation Size: Length Width Depth Concrete Volume 2000 lb/ft2 (9770 kg/m2) 4.7 tons (4300 kg) 3000 psi (211 kg/cm2) (for specific standard soil and typical design) 30 ft (9.14 m) 30 ft (9.14 m) 3 ft (0.91 m) 144 yd3 (100 m3) NOTE: Other typical foundation designs are available. Soil borings and foundation analysis should be performed by a qualified civil engineer. 4 PBESA81MEA.B All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0515A) © 2015 ASC Signal Corporation EARTH STATION ANTENNA 8.1 Meter Extended Azimuth ESA Motor Drive Speed Summary Motorization and NGC Options Variable Azimuth Elevation Polarization 0.05o/s 0.05o/s 0.5o/s 0.5o/s 1o/s Motorization One Dual Drive motorization system is available for this antenna: the NGC tracking system that can support Steptrack, Smartrack and Ephemeris orbital tracking application. The NGC-IDU controller can also operate the Sub-Reflector tracking system SRT-3-81, 3 axis Control Sub-Reflector Carriage, required for Ka application. Motor Kit Azimuth/Elevation Motor Kit NGC-MK81DD SRT Kit 3 axis Control Sub-Reflector Carriage SRT-3-81 Polarization Drive Kit (DC Step Motors) Standard Temperature (> -20oC) Low Temperature operation (< -20oC) NGC-PK9DRA NGC-PK9DRA-LO Outdoor Unit Controller (Tracking) Power 200 - 230 VAC, 3 Phase 50/60 Hz Power 380 - 460 VAC, 3 Phase 50/60 Hz NGC-ODU-208-3D NGC-ODU-380-3D Antenna controller, motorization and options are detailed in specific bulletins, please contact ASC Signal.. Antenna Configuration Earth Station Antennas Motorizable Mount with Az/El Jackscrews. ES81MPEXKA-1 Indoor NGC-IDU NGC-108 NGC-109 NGC-111 NGC-115 NGC-ULPC-INTFC NGC-ULPC-INTFC-2 NGC-119 NGC Rack Mounted Antenna Controller W/LCD Touch Panel NGC-IDU Analog Telephone Modem NGC-IDU Spectrum Analyzer Card - Analog NGC-IDU DVB Receiver Card NGC IDU, L-Band Internal Beacon Receiver NGC-IDU Emergency Stop Button NGC-IDU 10 Mhz Reference Source NGC-IDU Redundant Power Supply NGC-IDU Rack Slides NGC-IDU Step Tracking Software NGC-IDU Smartrack Software NGC-IDU Predictive Track Software NGC-IDU Full Tracking Capability Software NGC-IDU Remote Access Software Package NGC-IDU Spectrum Analyzer Enhanced User Interface Receive Pattern Test Tool Redundancy Control Software Sand/Dust/Debris Interface Uplink Power Control Software Function Uplink Power Control System Sincle Channel Uplink Power Control System Dual Channel NGC High Availability System Redundancy Software Outdoor NGC-201 NGC-202 NGC-205 NGC-206 NGC-207 NGC-211 NGC-AESC NGC-HTR-81KA-xxx NGC ODU Low Temperature Kit (-40 C) NGC ODU High Temperature Kit (+60 C) NGC ODU Polarization Drive Interface NGC Exterior Emergency Stop Button Pre Movement Alert Warning Light And Announcator Dual Path NGC Redundancy Kit,Antenna Environmental System Controller Kit,Heater Controller, De-Ice,Reflector,8.1M RED11-x RED12-x Hub Mounted 1:1 LNA/LNB Redundancy Plate Hub Mounted 1:2 LNA/LNB Redundancy Plate NGC-001 NGC-002 NGC-003 NGC-004-02 NGC-006 NGC-007 NGC-008 NGC-009 NGC-101 NGC-102 NGC-103 NGC-104 NGC-106 NGC-107 Antenna controller, motorization and options are detailed in specific bulletins, please contact ASC Signal.. 5 PBESA81MEA.B All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0515A) © 2015 ASC Signal Corporation EARTH STATION ANTENNA 8.1 Meter Extended Azimuth ESA Feed Matrix X/KA- BAND FEED SYSTEMS 8CPXKA-81-1 6CPXKA-81-1-LP 8CPXKA-81-1-LP PORT CP LOW PIM 8 6 8 X X X X X Ka- BAND FEED SYSTEMS 4CPWWKA-81-206 4LPWWKA-81 4LPEUTKA-8 PORT CP 4 4 4 X LP X X RX 7.25 7.75 GHz X X X RX 17.7 21.2 GHz X X TX 7.9 8.4 GHz X X X TX 27.5 31.0 GHz X X RX 20.2 21.2 GHz X X X TX 30.0 31.0 GHz X X X RX 21.4 22.0 GHz RX 27.0 30.05 GHz X X For Monopulse application, please contact ASC Signal. For redundant application, LNA support kits are available for each of the above feeds. Please contact ASC Signal. 6 PBESA81MEA.B All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0515A) © 2015 ASC Signal Corporation EARTH STATION ANTENNA 8.1 Meter Extended Azimuth ESA Antenna Options and Spares Anchor Bolt and Template Kits Options Hub Equipment Options 7579648 EMRGYLT-115 Emergency Hub Light Kit, 115 VAC EMRGYLT-220 Emergency Hub Light Kit, 220 VAC FV8HV0-115 Fan/Vent Kit, 2 Fans, Not Louvered, 115 VAC FV8HV0-230 Fan/Vent Kit, 2 Fans, Not Louvered, 230 VAC FV8HV2-115 Fan Vent Kit, 2 Louvers. 115 VAC FV8HV2-230 Fan Vent Kit, 2 Louvers. 230 VAC FV8HV4-115 Fan Vent Kit, 4 Louvers. 115 VAC FV8HV4-230 Fan Vent Kit, 4 Louvers. 230 VAC HUBHTR-230 Antenna Hub Heater, 230 VAC HUBLCNTR-115/240 Hub Power Center, 115/240 VAC HUBLCNTR-230 Hub Power Center, 230 VAC HUBLT-115 Hub Light Kit, 115 VAC HUBLT-230 Hub Light Kit, 230 VAC 7579848 Anchor Bolt Kit 8.1M Ka-Band Extended Azimuth Earth Station Antenna. Anchor Bolt Template Kit 8.1M Ka-Band Extended Azimuth Earth Station Antenna. Azimuth and Elevation Cross Axis Waveguide Options Please contact ASC Signal for specific application. Heating Options FH81KA WEC-81R-208-100 WEC-81R-380-100 Feed Heater and Anti Dew Kit, 8.1M Ka-Band ESA Electric Hot Air De-Ice System, 208 VAC, 3 Phase for 8.1m Ka band Electric Hot Air De-Ice System, 380 VAC, 3 Phase for 8.1m Ka band Environment Systems Options Safety Options PDKA-81-208 Precipitation Deviator, 208/230 VAC. ANTGND-9 Foundation Installed Grounding Kit PDKA-81-380 Precipitation Deviator, 380/415 VAC. LRK9 Lightning Rod Kit MANPL81-EXTAZ OBWRNLT-115 Maintenance Platform and Ladder Kit for 8.1m Extended Azimuth Mount Obstruction Warning Light Kit, 115VAC OBWRNLT-230 Obstruction Warning Light Kit, 230VAC LFK-8 Lift Kit Other Options ASC Signal Corporation 1120 Jupiter Road, Suite 102 Plano Texas 75074 USA Phone: +1-214-291-7654 Fax: +1-214-291-7655 www.ascsignal.com [email protected] 223711-2 Theodolite Alignment Kit 223711-UP8194 209906-2 Upgrade Kit for 223711 Theodolite Alignment Kit. Must currently have a 223711 Kit. Lubrication and Maintenance Kit 7580873 Kit Handwheel,12” OD,Alum,Med Ext Az FTST Feed System Testing TK-MAN-LG Tool Kit, Large Manual Antennas TK-MOT-LG Tool Kit, Large Motorized Antennas 7 PBESA81MEA.B All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0515A) © 2015 ASC Signal Corporation