EARTH STATION ANTENNA 3.7 Meter High Wind ESA Like all ASC Signal earth station antennas, the 3.7 Meter Earth Station Antenna provides high gain and exceptional pattern characteristics. This antenna system is designed to address the stringent requirements of both the television broadcast industry and telecommunications network operators who demand unsurpassed flexibility and electrical performance in high-quality, cost-effective, and reliable packages. The electrical performance and exceptional versatility provides the ability to configure the antenna with your choice of linearly- or circularly- polarized 2- or 4- port combining networks. That versatility is provided at the time of initial purchase, as well as in the future, as your satellite communication requirements evolve. This antenna system is used worldwide in broadcast applications and high density data, voice and communications networks. The ASC Signal 3.7 meter earth station antenna features a computeroptimized dual reflector Gregorian optics system and close-tolerance manufacturing techniques. This combination provides extremely accurate surface contour resulting in exceptionally high gain and closely controlled pattern characteristics. ASC Signal earth station antennas provide maximum durability with minimal maintenance. Features • Self-aligning main reflector • 3 year warranty on all structural components • U.S. FCC Regulation 25.209 at Ku-band • Russian Homologation Certificate OC/1-AO-136 • C, X, Ku, K Band Capabilities • High Wind Capability 1 PBESA37MHW.B All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0415A) © 2015 ASC Signal Corporation EARTH STATION ANTENNA 3.7 Meter High Wind ESA Design Standards Reflector Ground Mount Hardware Aluminum painted with highly diffusive white paint Hot-dipped galvanized steel, per ASTM-A123 for structural steel. Sizes ≤ 3/8 in (9.5mm), stainless steel, passivated per MIL-F-14072-E300 Sizes �≥ 3/8 in (9.5mm), hot-dipped galvanized stainless steel, passivated per ASTM-A123 Environmental Performances Operating Temperature -40o to 52oC (-40o to 125oF) Seismic (Earthquake) 1 G Vertical and Horizontal acceleration. Equivalent to a Richter Magnitude 8.3, and Grade 11 on the modified Mercalli Scale Operational Winds Survival Winds 100 mph (160 km/h) 180 mph (289 km/h) in any position of operation Rain 4 in (102 mm) per hour Solar Radiation 360 BTU/hr/ft2 (1135 Watts/m2) Relative Humidity 100% Shock and Vibration As encountered by commercial Air, Rail and Truck shipment. Atmospheric Conditions As encountered by Moderately Corrosive Coastal and Industrial Areas. Mechanical Performances The 3.7m Antenna mechanical general specifications and performances are listed in below table. Additional information, dimensions and layout may be provided by ASC Signal on a case-by-case basis. Optics Type Reflector Material Reflector Segments Mount Type Dual Reflector Gregorian Precision-Formed Aluminum 2 High Wind Manual El over Az, Pedestal Mount Antenna Pointing Range, Coarse/(Continuous) Elevation: 0-90o (90o) Azimuth: 180o (120o) Polarization (180o) Hub/Enclosure Dimensions Diameter Depth 1.22 m (48 in) 0.61 m (24 in) optional 0.83m (32.5 in) Shipping Information Packing Options Standard Commercial Domestic Pack Ocean Export Pack - For non-containerized, packed for seal against salt water spray Air Export Pack - For freighter aircraft shipments. Lower deck AirPack requires specialized bids Container Packaging Required Shipping Container Standard 20 ft land/sea container Included OCEANSHP-SML AIR EXPORT PACK-SML CNTPCK-SML Quantity 1 Shipping container information is given for basic configuration and may vary depending on the selected options, please contact ASC Signal for specific container loading plan. 2 PBESA37MHW.B All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0415A) © 2015 ASC Signal Corporation Dimensional Drawings High Wind Non Motorizable Mount 12.2 ft (3.7 m) Center Position (-60 TO +60) Left Position (-90 TO +30) Right Position (-30 TO +90) D C R 8.5 ft (2.6 m) B 9.7 ft max. (3.0 m) Azimuth Pivot Axis E 64 in A Total Area Covered 3.7 Meter Earth Station Antenna (Pedestal Mount) 90 3.7M HW Manual Pedestal Mount B 80 Elevation Angle (Degrees) EARTH STATION ANTENNA 3.7 Meter High Wind ESA 70 60 50 A 40 C 30 D 20 E 10 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Dimension (Feet) 3.7M High Wind Manual Pedestal Mount 3 PBESA37MHW.B All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0415A) © 2015 ASC Signal Corporation Foundation, Typical Slab High Wind Mount Note: Crane access is to be provided within 40ft (12m) of pads (based on 15 ton crane) 5 ft. 3 in. 8ft (2.4m) minimum clearance 5 ft. 3 in. Assembly area for mount and antenna 5 ft. 3 in. 25ft (7.5m) EARTH STATION ANTENNA 3.7 Meter High Wind ESA Azm = Azimuth direction of mount 15ft (4.5m) minimum clearance 5ft (1.5m) minimum clearance 5 ft. 3 in. 8ft (2.4m) minimum clearance 25ft (7.5m) 1 ft. 6 in. 30ft (9m) minimum clearance on either side of foundation for crane access Foundation information are provided in bulletin 237591, please contact ASC Signal. Soil Bearing Capacity, 2000 lb/ft2 (9770 kg/m2) Reinforcing Steel, 626 Lbs (282 Kilograms) Concrete Compressive 3000 psi (211 kg/cm2) Strength, Foundation Size: (for specific standard soil and typical design) Length 10 ft 6 in(3.20 m) Width 10 ft 6 in(3.20 m) Depth 1 ft 6 in (0.457 m) Concrete Volume 6.13 yd3 (4.68 m3) NOTE: Other typical foundation designs are available. Soil borings and foundation analysis should be performed by a qualified civil engineer. 4 PBESA37MHW.B All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0415A) © 2015 ASC Signal Corporation EARTH STATION ANTENNA 3.7 Meter High Wind ESA Antenna Configurations X, Ku, K Band Earth Station Antennas Manual Pedestal Mount. ES37PKHW-1 C Band Earth Station Antennas Manual Pedestal Mount. ES37PKHW-EC-1 Feed Matrix C- BAND FEED SYSTEMS 2CPC-37-109 2CPCR-37-109 PORT CP LP 2 2 X X X X- BAND FEED SYSTEMS 2CPX-37 PORT CP 2 X Ku- BAND FEED SYSTEMS 2LPK-37-W PORT LP RX 3.625 4.2 GHz X X RX 7.25 7.75 GHz X TX 7.9 8.4 GHz X RX 10.9512.25 GHz 2 X RX 10.9512.75 GHz X 2LPKR-37-W 2 X X 2LPKUNV-37 2 X 4LPK-37-W 4 X 4LPKUNV-37-1 4 X 4LPKUNV-37-2 4 X K- BAND FEED SYSTEMS 2LPKK-37 PORT LP 2 X 4LPKK-37 4 X 4CPKK-37-206 4 TX 5.850 6.425 GHz X RX 10.7 12.75 GHz RX 10.7 13.25 GHz RX 10.7 11.7 GHz TX 12.7513.25 GHz TX 14.0 14.5 GHz X X X X X X X X CP X TX 13.7514.8 GHz RX 10.7 12.75 GHz X TX 17.3 18.4 GHz X X X X X X X For redundant application, LNA support kits are available for each of the above feeds. Please contact ASC Signal. 5 PBESA37MHW.B All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0415A) © 2015 ASC Signal Corporation EARTH STATION ANTENNA 3.7 Meter High Wind ESA Antenna Options and Spares Anchor Bolt and Template Kits Option Hub Equipment Options 203666HW EMRGYLT-115 Emergency Hub Light Kit, 115 VAC EMRGYLT-230 Emergency Hub Light Kit, 230 VAC Azimuth and Elevation Cross Axis Waveguide Options FV5-115 Fan and Vent Kit, 115 VAC 1XAK-5 Ku-Band Cross Axis Waveguide Kit, 2-Port. FV5-220 Fan and Vent Kit, 230 VAC 1XAKK-5 K-Band Cross Axis Waveguide Kit, 2-Port. FV5HV-115 High Volume Fan and Vent Kit, 115 VAC X-Band Cross Axis Waveguide Kit, 2-Port. FV5HV-230 High Volume Fan and Vent Kit, 230 VAC Ku-Band Polarization Waveguide Kit, 2-Port. FV5HV-48 High Volume Fan and Vent Kit, 48VDC K-Band Polarization Waveguide Kit, 2-Port. HUBHTR-230 Antenna Hub Heater, 230 VAC X-Band Polarization Waveguide Kit, 2-Port. HUBLCNTR-115/240 Hub Power Center, 115/240 VAC Ku-Band Cross Axis Waveguide Kit, 4-Port. HUBLCNTR-230 Hub Power Center, 230 VAC K-Band Cross Axis Waveguide Kit, 4-Port. HUBLT-115 Hub Light Kit, 115 VAC 2XPK-37 Ku-Band Polarization Waveguide Kit, 4-Port. HUBLT-230 Hub Light Kit, 230 VAC 2XPKK-37 K-Band Polarization Waveguide Kit, 4-Port. 2XPX-37 X-Band Polarization Waveguide Kit, 4-Port. Safety Options 1XAX-37 1XPK-37 1XPKK-37 1XPX-37 2XAK-5 2XAKK-5 Anchor Bolt Kit for 3.7 Meter High Wind Earth Station Heating Options ANTGND-5 Foundation Installed Grounding Kit LRK5 Lightning Rod Kit FH4A C-Band Feed Heater Kit OBWRNLT-115 Obstruction Warning Light Kit, 115VAC FHXA X-Band Feed Heater OBWRNLT-230 Obstruction Warning Light Kit, 230VAC FH5A Ku and K-Band Feed Heater FR37A WEC37R-208-100 Full-Reflector Heater Pads Electric Hot Air De-Ice System, 208 VAC, 3 Phase Electric Hot Air De-Ice System, 380 VAC, 3 Phase Other Options WEC37R-380-100 Upgrade Options 37CUPGK Kit to Convert from C-Band to Ku-Band 37CUPGX Kit to Convert From C-Band to X-Band 37KUPGC Kit to Convert From Ku-Band to C-Band 37KUPGX Kit to Convert From Ku-Band to X-Band 209906 Lubrication and Maintenance Kit BRNG-374676-X Guard, Feed Window X-band BRNG-3746-C BRNG-37-K Guard, Feed Window C-band Guard, Feed Window K-band BRNG-37-KU Guard, Feed Window Ku-band FTST Feed System Testing TK-MAN-SML Tool Kit, Small Manual Antennas Environmental Systems Options PDKU-37-208 PDKU-37-380 ASC Signal Corporation 1120 Jupiter Road, Suite 102 Plano Texas 75074 USA Phone: +1-214-291-7654 Fax: +1-214-291-7655 www.ascsignal.com [email protected] Precipitation Deviator Ku-band 208 VAC, 3 Phase Precipitation Deviator Ku-band 380 VAC, 3 Phase 6 PBESA37MHW.B All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0415A) © 2015 ASC Signal Corporation