CYG2110

CYG2110
CybergateTM DAA
INTEGRATED CIRCUITS DIVISION
Features
Description
• Low Distortion Transformer Signal Coupling
(0.01% max)
• Complete Ringing Detector Circuit
• Low Power Hook Switch
• Electronic Inductor/Gyrator Circuit
• Surge Protection
• V.32 bis/V.34 Compatible
• PTT and Safety Regulations in France
• PC Board Mountable
• FCC Compatible
IXYS Integrated Circuits Division's CYG2110 DAA
Module, designed for use in France, provides a
complete telephone line interface circuit in a small
(1.07" x 1.07" x 0.4") package. The module provides a
fast and cost-effective solution for designs that require
an interface to the telephone line.
The CYG2110 is designed to meet PTT and safety
regulations in France. Select the CYG2100 for use in
most other EU nations, except Spain.
Applications
•
•
•
•
•
•
•
•
•
•
•
•
•
Approvals
Home Medical Devices
Plant Monitoring Equipment
Security/Alarm Systems
Utility Meters
Modems
Voice Mail Systems
Vending Machines
Elevator Control Boxes
Network Routers
PBX Systems
PC Mother Boards
Telephony Applications
Digital Telephone Answering Machines
• EN/IEC 60950 Compliant
Ordering Information
Part
Description
CYG2110
CYBERGATE Module (France only)
(18/Tube)
Typical Application
6
HYBRID
CIRCUIT
TX2
LINE 1
4.3V
4.3V
LINE 2
VCC
1
10
2
VCC
RING
DETECT
NETWORK
RX
GND
RING
OH
RING
RING
GYRATOR
HOOKSWITCH
OH RELAY
VCC
7
5
3
SURGE
PROTECTOR
100Ω
TX1
MUTE
TO TELEPHONE LINE
11
470Ω
TIP
4
56kΩ
VCC
GND
CYG2110
DS-CYG2110-R02
www.ixysic.com
1
CYG2110
INTEGRATED CIRCUITS DIVISION
1 Specifications
1.1 Absolute Maximum Ratings @ 25°C
Symbol
Isolation Voltage, Input to Output
Tip/Ring Load Current
(Continuous)
Hook Switch LED Drive Current
Hook Switch LED Reverse Voltage
Ring Detect Phototransistor
Voltage VCC
Relative Humidity
(non-condensing)
Operational Temperature
Storage Temperature
Ratings
Units
1500
Vrms
120
mA
50
mA
5
V
20
V
10-85
%
0-70
°C
0-100
°C
Absolute maximum ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
1.2 DC Electrical Characteristics @ 25°C (Unless Otherwise Noted)
Parameter
Conditions
Minimum
Typical
Maximum
Units
On-Hook Impedance
@100VDC Across Pins 11, 10 (T, R)
10
-
-
M
Off-Hook Line Leakage Current
@100VDC Across Pins 11, 10 (T, R)
-
-
10
A
Hook Switch Resistance
OH = GND, VCC = +5VDC
-
-
35

Off-Hook Supply Current
OH = GND, VCC = +5VDC
7
8
9
mA
-
4.75
5
12
V
OH = GND, VCC = +5VDC
5
-
120
mA
Hook Switch Power Source, Pin 51
DC Loop Current
1
For VCC > +12V, select an external resistor (R) such that ((VCC - 1.4) / R) < 50mA
1.3 AC Signal Path Electrical Characteristics @ 25°C (Unless Otherwise Noted)
Parameter
Conditions
Minimum
Typical
Maximum
Units
OH = GND, 300Hz to 3500Hz (600)
14
25
-
dB
OH = GND, 300Hz to 3500Hz (600)
-
-
7
dB
OH = GND, 300Hz to 3500Hz
-0.25
-
+0.25
dB
On-Hook
OH = VCC
60
-
-
Off-Hook
OH = GND
40
-
-
Return Loss
Insertion Loss
Transmit
Receive
Frequency Response
Longitudinal Balance
Total Harmonic Distortion
dB
OH = GND, -10dBm, f=350Hz
-
-
0.01
%
Secondary Load Impedance
Line 1 & Line 2
-
100
-

Primary Source Impedance
Tip & Ring
-
600
-

R02
www.ixysic.com
2
CYG2110
INTEGRATED CIRCUITS DIVISION
1.4 Ring Detection Circuit Electrical Characteristics @ 25°C (Unless Otherwise Noted)
Parameter
Conditions
Minimum
Typical
Maximum
Units
Ringing Voltage Detection Range
-
29
-
150
Vrms
Ringing Frequency Detection Range
-
15
-
70
Hz
f = 25Hz
-
18
-
k
-
-
0.8
-
-
VCC
Ringing Impedance
RING (Pin 9) Output Voltage (Pulsed)
Logic “0”, Ring Present
-
Logic “1”, Ring Not Present
V
1.5 Surge, Transient, and Isolation Electrical Characteristics @ 25°C (Unless Otherwise Noted)
Parameter
Conditions
Minimum
Typical
Maximum
Units
Surge Protection Voltage Tip & Ring (Pins 11, 10)
-
-
-
300
V
Isolation Voltage, Pins (1, 2, 3, 4, 5, 6, 7) to (10, 11)
-
-
-
1500
Vrms
1.6 Test Circuits
CYG2110 Receive Insertion Loss
VR
Rm
294Ω
LINE1
LINE2
RING
GND
OH
MUTE
VCC
CYG2110 Transmit Insertion Loss
VT
+VBATT
ILOOP
TIP
600Ω
RING
Receive Insertion Loss = G RC = 20 Log
LINE1
LINE2
RING
GND
OH
MUTE
VCC
10H
VLR
+5V
Rm
294Ω
AC
Source
+VBATT
ILOOP
10H
TIP
VLT
+5V
600Ω
RING
VR
10H
Transmit Insertion Loss = GTR = 20 Log
V LR
-VBATT
10H
VLT
VT
-VBATT
1.7 CYG2110 Pinouts and Definitions
Pinouts
Pin#
I/O
Name
1
I/O
LINE 1
Transformer isolated winding connection 1.
2
I/O
LINE 2
Transformer isolated winding connection 2.
3
O
RING
Active low indicates incoming ring signal. This is pulsed low by
the AC ring signal, and is not a steady-state low during ringing.
4
I
GND
Return Path for VCC
5
I
OH
6
I
MUTE
7
I
VCC
10
I/O
RING
11
I/O
TIP
LINE 1 (PIN 1)
LINE 2
RING
GND
OH
Function
Driving this pin low asserts the off-hook condition. The hook
switch LED is current limited by an internal 470 resistor.
MUTE
VCC
TIP
RING
Top View
3
Not Used
Provides power to the hook switch LED. Voltage is usually +5V
(for 8mA LED current), but can be higher if an external resistor
is placed in series with the internal 470 resistor.
Connection to telephone line Ring conductor.
Connection to telephone line Tip conductor.
www.ixysic.com
R02
CYG2110
INTEGRATED CIRCUITS DIVISION
2 Manufacturing Information
2.1 Handling and Assembly Recommendations
The CYG2110 is not hermetically sealed, and should not be exposed to any liquid-based rinsing processes. IXYS
Integrated Circuits Division recommends two (2) approaches: (1) the modem should be installed in a wave-soldering
process that uses a no-clean soldering flux that will mostly evaporate during the normal wave-soldering processes,
(2) the modem should be soldered in by hand after the rest of the card is wave-soldered.
2.2 Reflow Profile
This product has a maximum solder temperature as shown below.
Device
Maximum Temperature
CYG2110
260°C
2.3 Mechanical Dimensions
2.3.1 CYG2110
1.91
(0.075)
27.18
(1.070)
10.16
(0.400)
21.59
(0.850)
LINE 1 (PIN 1)
3.43
(0.135)
LINE 2
RING
27.18
(1.070)
2.54
(0.100)
typ.
GND
OH
MUTE
VCC
0.634 SQ.
(0.025)
TYP.
TIP
RING
3.18
(0.125)
TOP VIEW
SIDE VIEW
1.09 DIA.
(0.043)
TYP.
PCB Pattern
(Top View)
Dimensions
mm
(inches)
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its
products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CYG2110-R02
©Copyright 2012, IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
12/19/2012
R02
www.ixysic.com
4