Dim A Mounting Hardware Pack Q'TY CPCI-CP4HP 0.79 ( 20mm ) 1 CPCI-CP5HP 0.99 ( 25mm ) 1 CPCI-CP6HP 1.19 ( 30mm ) 1 0.535 [13.6mm] CPCI-CP7HP 1.39 ( 35mm ) 2 0.591 [15.0mm] CPCI-CP8HP 1.59 ( 40mm ) 2 CPCI-CP10HP 1.99 ( 50mm ) 2 CPCI-CP12HP 2.39 ( 61mm ) 2 CPCI-CP14HP 2.79 ( 71mm ) 3 CPCI-CP16HP 3.19 ( 81mm ) 3 CPCI-CP18HP 3.59 ( 91mm ) 3 CPCI-CP20HP 3.99 ( 101mm ) 3 Part No. REV. DESCRIPTION A Engineering Release. B Notes Update without Change. DATE APPROVED 06/25/14 11/17/14 J. C. J. C. A 0.031 [0.8mm] 0.315 [8.0mm] 0.358 [9.1mm] 0.551 [14.0mm] SCREW THROUGH PANEL AREA FOR OPTIONAL MARKING HEAT STAKE THROUGH PANEL 0.400 SPACING SQUARE NUT HEAT STAKE BLOCK 2X SQUARE NUT 2X M2.0x0.4 SCREW SCREW MOUNTING HEAT STAKE MOUNTING MOUNTING OPTIONS MOUNTING HARDWARE PACK STANDARD TOLERANCE ( UNLESS OTHERWISE SPECIFIED ) DECIMALS ANGULAR 4 THOMAS, IRVINE, CA. 92618 TEL: (949) 951-8808 NOTES: 1. Handle Material: Aluminum 6063 T6 2. Mounting Hardware Packaged Separately TITLE: DESIGNED: Brian Oliver CHECKED: A. Wright DATE: 06/25/14 DATE: 06/25/14 FAX: (949) 951-3974 FACEPLATE HANDLE REVISION: PART NO: CPCI-CPXHP CAGE CODE : 32559 B SHEET # 1 OF 1 CAD GENERATED DOCUMENT, DO NOT MEASURE DRAWING.