REV. DESCRIPTION A Engineering Release. DATE APPROVED 07/25/14 J. C. 0.070 [1.8mm] AREA FOR MARKING 0.359 [9.1mm] 0.276 [7.0mm] 0.083 [2.1mm] DETACH PIN TO ASSEMBLE 1.573 [40.0mm] 1.378 [35.0mm] 3D VIEW 0.454 [11.5mm] 0.320 [8.1mm] 1.550 [39.4mm] KEEPOUT AREA Card Ejector with Attached Pin 0.631 [16.0mm] 0.219 [5.6mm] 0.140 [3.6mm] Recommended Board Layout STANDARD TOLERANCE ( UNLESS OTHERWISE SPECIFIED ) DECIMALS ANGULAR 4 THOMAS, IRVINE, CA. 92618 TEL: (949) 951-8808 DESIGNED: Brian Oliver CHECKED: A. Wright DATE: 07/24/14 DATE: 07/24/14 FAX: (949) 951-3974 CARD EJECTOR WITH ATTACHED PIN, BOTTOM TITLE: REVISION: PART NO: CPCI-CP-B CAGE CODE : 32559 A SHEET # 1 OF 2 CAD GENERATED DOCUMENT, DO NOT MEASURE DRAWING. REV. DESCRIPTION A Engineering Release. 0.58 [14.7mm] 1.15 [29.1mm] 0.40 [10.2mm] DATE APPROVED 07/25/14 J. C. FOR USE WITH VME CARD GUIDES: CPCI-160 CPCI-220 CPCI-VXXX 0.51 [13.1mm] Card Ejector with Attached Pin 0.47 [12.0mm] Card Ejector Sub Rack Adaptor Card Ejector Sub Rack Adaptor Card Ejector Sub Rack Adaptor and Card Ejector with Attached Pin Packaged Together STANDARD TOLERANCE ( UNLESS OTHERWISE SPECIFIED ) DECIMALS ANGULAR 4 THOMAS, IRVINE, CA. 92618 TEL: (949) 951-8808 DESIGNED: Brian Oliver CHECKED: A. Wright DATE: 07/24/14 DATE: 07/24/14 FAX: (949) 951-3974 CARD EJECTOR WITH ATTACHED PIN, BOTTOM TITLE: REVISION: PART NO: CPCI-CP-B CAGE CODE : 32559 A SHEET # 2 OF 2 CAD GENERATED DOCUMENT, DO NOT MEASURE DRAWING.