RLS245 Diodes Leadless high voltage switching diode RLS245 zExternal dimensions (Unit : mm) zApplications High voltage switching General purpose rectification 㪚㪘㪫㪟㪦㪛㪜䇭㪙㪘㪥㪛 㪇㪅㪋 㪇㪅㪋 㱢㪈㪅㪋㫧㪇㪅㪈 zFeatures 1) Ultra small. (LLDS) 2) For surface mounting. 3) High voltage and high reliability. 㪊㪅㪋㫧㪇㪅㪉 㪩㪦㪟㪤㩷㪑㩷㪣㪣㪛㪪 㪡㪜㪛㪜㪚㩷㪑㩷㪣㪣㪄㪊㪋 zConstruction Silicon epitaxial planar 㩿㪮㪟㪠㪫㪜㪀 㱢㪈㪅㪌㪤㪘㪯 zLand size figure (Unit : mm) zStructure 㩷 4 䌌䌌䌄䌓 ! zTaping specifications 㪈㪅㪏㫧㪇㪅㪉 㱢㪈㪅㪇㫧㪇㪅㪉 䇭䇭䇭䇭䇭㪇 㪋㪅㪇㫧㪇㪅㪈 㪇㪅㪊㪤㪘㪯 㪏㪅㪇㫧㪇㪅㪊 㪊㪅㪏㫧㪇㪅㪈 㪈㪅㪎㪌㫧㪇㪅㪈 㪈㪅㪌㫧㪇㪅㪈 䇭䇭䇭㩷㪇 㪊㪅㪌㫧㪇㪅㪇㪌 㪋㪅㪇㫧㪇㪅㪈 㪉㪅㪇㫧㪇㪅㪇㪌 㪈㪅㪍㫧㪇㪅㪈 㪫㪜㪄㪈㪈 zAbsolute maximum ratings (Ta=25qC) Parameter Reverse voltage (repetitive peak) Reverse voltage (DC) Forward current Average rectified forward current Surge current 䋨1s䋩 Power dissipation Junction temperature Storage temperature Symbol VRM VR IFM Io Isurge P Tj Tstg Limits 250 220 625 200 1000 300 175 -65 to +175 Unit V V mA mA mA mW 㷄 㷄 zElectrical characteristics (Ta=25qC) Parameter Forward voltage Reverse current Capacitance between terminals Reverse recovery time Symbol VF IR Ct Trr Min. - Typ. - Max. 1.5 10 3.0 75 Unit V μA pF ns Conditions IF=200mA VR=220V VR=0V , f=1MHz IR=20mA,IF=20mA,RL=50㱅 Rev.A 1/2 RLS245 Diodes zElectrical characteristic curves (Ta=25qC) 㪈㪇 㪈㪇㪇㪇㪇㪇㪇㪇 㪈㪇㪇㪇 㪫㪸㪔㪈㪎㪌㷄 㪽㪔㪈㪤㪟㫑 㪫㪸㪔㪈㪉㪌㷄 㪫㪸㪔㪈㪎㪌㷄 㪫㪸㪔㪉㪌㷄 㪈㪇 㪫㪸㪔㪄㪉㪌㷄 㪈㪇㪇㪇㪇㪇 㪫㪸㪔㪈㪉㪌㷄 㪈㪇㪇㪇㪇 㪫㪸㪔㪎㪌㷄 㪈㪇㪇㪇 㪫㪸㪔㪄㪉㪌㷄 㪈㪇 㪇㪅㪈 㪇 㪇㪅㪈 㪇㪅㪉 㪇㪅㪊 㪇㪅㪋 㪇㪅㪌 㪇㪅㪍 㪇㪅㪎 㪇㪅㪏 㪇㪅㪐 㪈 㪈㪅㪈 㪈㪅㪉 㪝㪦㪩㪮㪘㪩㪛㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪝㩿㫄㪭㪀 㪭㪝㪄㪠㪝㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪈 㪇㪅㪈 㪇 㪈㪅㪈㪍 㪌㪇 㪈㪇㪇 㪈㪌㪇 㪉㪇㪇 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪩㩿㪭㪀 㪭㪩㪄㪠㪩㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪉㪌㪇 㪇 㪉㪇㪇 㪈㪅㪈㪌 㪈㪅㪈㪋 㪈㪅㪈㪊 㪈㪅㪈㪉 㪈㪅㪈㪈 㪈㪍㪇 㪈㪋㪇 㪈㪉㪇 㪈㪇㪇 㪏㪇 㪍㪇 㪋㪇 㪉㪇 㪘㪭㪜㪑㪈㪅㪈㪉㪈㪭 㪈㪅㪈 㪈 㪇㪅㪌 㪘㪭㪜㪑㪇㪅㪐㪋㪉㫇㪝 㪘㪭㪜㪑㪋㪏㪅㪇㪊㫅㪘 㪇 㪭㪝㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪠㪩㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪚㫋㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪌 㪈㪺㫐㪺 㪠㪽㫊㫄 㪏㪅㪊㫄㫊 㪈㪇 㪌 㪘㪭㪜㪑㪋㪅㪍㪇㪘 㪇 㪫㪸㪔㪉㪌㷄 㪠㪝㪔㪠㪩㪔㪉㪇㫄㪘 㪩㪣㪔㪌㪇㱅 㫅㪔㪈㪇㫇㪺㫊 㪋㪌 㪋㪇 㪊㪌 㪊㪇 㪉㪌 㪉㪇 㪈㪌 㪈㪇 㪧㪜㪘㪢㩷㪪㪬㪩㪞㪜 㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪝㪪㪤㩿㪘㪀 㪩㪜㪪㪜㪩㪭㪜㩷㪩㪜㪚㪦㪭㪜㪩㪰㩷㪫㪠㪤㪜㪑㫋㫉㫉㩿㫅㫊㪀 㪌㪇 㪈㪌 㪌 㪫㪸㪔㪉㪌㷄 㪭㪩㪔㪇㪭 㪽㪔㪈㪤㪟㫑 㫅㪔㪈㪇㫇㪺㫊 㪈㪅㪌 㪇 㪉㪇 㪈 㪉 㪊 㪋 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪩㩿㪭㪀 㪭㪩㪄㪚㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪉 㪫㪸㪔㪉㪌㷄 㪭㪩㪔㪉㪉㪇㪭 㫅㪔㪊㪇㫇㪺㫊 㪈㪏㪇 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥 㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀 㪫㪸㪔㪉㪌㷄 㪠㪝㪔㪉㪇㪇㫄㪘 㫅㪔㪊㪇㫇㪺㫊 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀 㪝㪦㪩㪮㪘㪩㪛㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪝㩿㪭㪀 㪫㪸㪔㪉㪌㷄 㪈㪇㪇 㪈 㪈 㪧㪜㪘㪢㩷㪪㪬㪩㪞㪜 㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪝㪪㪤㩿㪘㪀 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥 㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀 㪫㪸㪔㪎㪌㷄 㪈㪇㪇 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀 㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪝㩿㫄㪘㪀 㪈㪇㪇㪇㪇㪇㪇 㪠㪽㫊㫄 㪋 㪏㪅㪊㫄㫊 㪏㪅㪊㫄㫊 㪈㪺㫐㪺 㪊 㪉 㪈 㪘㪭㪜㪑㪊㪈㪅㪊㫅㫊 㪌 㪇 㪇 㪈 㪠㪝㪪㪤㩷㪛㪠㪪㪩㪜㪪㪠㪦㪥㩷㪤㪘㪧 㫋㫉㫉㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪈㪇 㪥㪬㪤㪙㪜㪩㩷㪦㪝㩷㪚㪰㪚㪣㪜㪪 㪠㪝㪪㪤㪄㪚㪰㪚㪣㪜㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪈㪇㪇 㪤㫆㫌㫅㫋㪼㪻㩷㫆㫅㩷㪼㫇㫆㫏㫐㩷㪹㫆㪸㫉㪻 㪈㪇㪇㪇 㫋 㪈㪇 㪈 㪇㪅㪈 㪈 㪈㪇 㪫㪠㪤㪜㪑㫋㩿㫄㫊㪀 㪠㪝㪪㪤㪄㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㫋㩿㫄㫊㪀 㪈㪇㪇 㪠㪤㪔㪈㫄㪘 㪠㪝㪔㪈㪇㫄㪘 㪈㪇 㪩㫋㪿㩿㫁㪄㪸㪀 㪈㫄㫊 㪐 㫋㫀㫄㪼 㪜㪣㪜㪚㪫㪩㪦㪪㪫㪘㪫㪠㪚 㪛㪠㪪㪚㪟㪘㪩㪞㪜㩷㪫㪜㪪㪫㩷㪜㪪㪛㩿㪢㪭㪀 㪠㪽㫊㫄 㪫㪩㪘㪥㪪㪠㪜㪥㪫 㪫㪟㪘㪜㪩㪤㪘㪣㩷㪠㪤㪧㪜㪛㪘㪥㪚㪜㪑㪩㫋㪿㩷㩿㷄㪆㪮㪀 㪧㪜㪘㪢㩷㪪㪬㪩㪞㪜 㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪝㪪㪤㩿㪘㪀 㪈㪇㪇 㪊㪇㪇㫌㫊 㪩㫋㪿㩿㫁㪄㫃㪀 㪈㪇㪇 㪩㫋㪿㩿㫁㪄㪺㪀 㪏 㪎 㪍 㪌 㪋 㪇 㪇㪅㪈 㪈㪇 㪫㪠㪤㪜㪑㫋㩿㫊㪀 㪩㫋㪿㪄㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪘㪭㪜㪑㪍㪅㪋㪊㫂㪭 㪉 㪈 㪈㪇 㪇㪅㪇㪇㪈 㪘㪭㪜㪑㪉㪅㪈㪌㫂㪭 㪊 㪚㪔㪉㪇㪇㫇㪝 㪩㪔㪇㱅 㪚㪔㪈㪇㪇㫇㪝 㪩㪔㪈㪅㪌㫂㱅 㪈㪇㪇㪇 㪜㪪㪛㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 Rev.A 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1