RB160L-40 Diodes Schottky barrier diode RB160L-40 zApplications General rectification z Land size figure (Unit : mm) z External dimensions (Unit : mm) 㪉㪅㪇 㪉㪅㪇 㪉㪅㪍㫧㪇㪅㪉 㪊 㪋 㽲 㽳 㪇㪅㪈㫧㪇㪅㪇㪉 䇭䇭䇭㩷㪇㪅㪈 㪌㪅㪇㫧㪇㪅㪊 㪋㪅㪌㫧㪇㪅㪉 㪈㪅㪉㫧㪇㪅㪊 㪋㪅㪉 zFeatures 1) Small power mold type. (PMDS) 2) Low IR. 3) High reliability. 㪧㪤㪛㪪 㪉㪅㪇㫧㪇㪅㪉 㪈㪅㪌㫧㪇㪅㪉 zConstruction Silicon epitaxial planar zStructure 㪩㪦㪟㪤㩷㪑㩷㪧㪤㪛㪪 㪡㪜㪛㪜㪚㩷㪑㩷㪪㪦㪛㪄㪈㪇㪍 㽲 㽳 㪤㪸㫅㫌㪽㪸㪺㫋㫌㫉㪼㩷㪛㪸㫋㪼 z Taping specifications (Unit : mm) 㪉㪅㪇㫧㪇㪅㪇㪌 㪇㪅㪊 㱢㪈㪅㪌㪌㫧㪇㪅㪇㪌 㪈㪉㫧㪇㪅㪉 㪌㪅㪌㫧㪇㪅㪇㪌 㪌㪅㪊 㫧㪇㪅㪈 䇭㩷㩷㩷㩷㩷㩷㪇㪅㪇㪌 㪐㪅㪌㫧㪇㪅㪈 㪈㪅㪎㪌㫧㪇㪅㪈 㪋㪅㪇㫧㪇㪅㪈 㱢㪈㪅㪌㪌 㪉㪅㪐㫧㪇㪅㪈 㪋㪅㪇㫧㪇㪅㪈 㪉㪅㪏㪤㪘㪯 zAbsolute maximum ratings (Ta=25qC) Param eter Sym bol Lim its Unit R evers e voltage (repetitive peak) VRM 40 V R evers e voltage (DC) VR 40 V Average rectified forward current Io 1 A IFSM 70 A Forward current s urge peak (60Hz̠ 1cyc) Junction tem perature Tj 150 㷄 S torage tem perature Ts tg -40 to +150 㷄 (* 1)Tc=90 ͨ m ax Mounted on epoxy board. 180 ͥ Half s ine wave zElectrical characteristics (Ta=25qC) Param eter Forward voltage R evers e current Sym bol Min. Typ. Max. Unit Conditions VF - - 0.55 V IF =1.0A IR 1 - - 10 μA VR =6V IR 2 - - 100 μA VR =40V Rev.B 1/3 RB160L-40 Diodes zElectrical characteristic curves (Ta=25qC) 㪈㪇㪇㪇㪇㪇 㪫㪸㪔㪈㪌㪇㷄 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫌㪘㪀 㪫㪸㪔㪈㪌㪇㷄 㪫㪸㪔㪈㪉㪌㷄 㪈㪇㪇㪇 㪇㪅㪈 㪫㪸㪔㪉㪌㷄 㪫㪸㪔㪄㪉㪌㷄 㪇㪅㪇㪈 㪫㪸㪔㪎㪌㷄 㪈㪇㪇 㪈㪇 㪫㪸㪔㪉㪌㷄 㪈 㪫㪸㪔㪄㪉㪌㷄 㪇㪅㪈 㪇 㪍㪇㪇 㪫㪸㪔㪉㪌㷄 㪠㪝㪔㪈㪘 㫅㪔㪊㪇㫇㪺㫊 㪌㪇㪇 㪋㪐㪇 㪋㪏㪇 㪋㪎㪇 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫌㪘㪀 㪝㪦㪩㪮㪘㪩㪛㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪝㩿㫄㪭㪀 㪌㪈㪇 㪘㪭㪜㪑㪋㪏㪐㪅㪍㫄㪭 㪋㪍㪇 㪈㪇 㪉㪇 㪊㪇 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪩㩿㪭㪀 㪭㪩㪄㪠㪩㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪇 㪫㪸㪔㪉㪌㷄 㪭㪩㪔㪋㪇㪭 㫅㪔㪊㪇㫇㪺㫊 㪘㪭㪜㪑㪉㪅㪉㪇㪎㫌㪘 㪉㪊㪇 㪉㪉㪇 㪉㪈㪇 㪉㪇㪇 㪈㪐㪇 㪈㪏㪇 㪈㪎㪇 㪘㪭㪜㪑㪈㪐㪉㪅㪎㫇㪝 㪈㪍㪇 㪈㪌㪇 㪚㫋㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪉㪇㪇 㪉㪇 㪈㪺㫐㪺 㪏㪅㪊㫄㫊 㪈㪇㪇 㪌㪇 㪘㪭㪜㪑㪈㪉㪌㪅㪍㪘 㪩㪜㪪㪜㪩㪭㪜㩷㪩㪜㪚㪦㪭㪜㪩㪰㩷㪫㪠㪤㪜㪑㫋㫉㫉㩿㫅㫊㪀 㪠㪽㫊㫄 㪇 㪫㪸㪔㪉㪌㷄 㪠㪝㪔㪇㪅㪌㪘 㪠㪩㪔㪈㪘 㪠㫉㫉㪔㪇㪅㪉㪌㪁㪠㪩 㫅㪔㪈㪇㫇㪺㫊 㪈㪌 㪈㪇 㪌 㪘㪭㪜㪑㪏㪅㪍㪍㪎㫅㫊 㪠㪽㫊㫄 㪈㪌㪇 㪏㪅㪊㫄㫊 㪏㪅㪊㫄㫊 㪈㪺㫐㪺 㪈㪇㪇 㪌㪇 㪇 㪇 㪈 㪠㪝㪪㪤㩷㪛㪠㪪㪩㪜㪪㪠㪦㪥㩷㪤㪘㪧 㫋 㪉㪇㪇 㪈㪌㪇 㪈㪇㪇 㪌㪇 㪇 㪈 㪈㪇 㪫㪠㪤㪜㪑㫋㩿㫄㫊㪀 㪠㪝㪪㪤㪄㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪈㪇㪇 㪤㫆㫌㫅㫋㪼㪻㩷㫆㫅㩷㪼㫇㫆㫏㫐㩷㪹㫆㪸㫉㪻 㪩㫋㪿㩿㫁㪄㪸㪀 㪈㪅㪌 㪈㪇㪇 㪩㫋㪿㩿㫁㪄㪺㪀 㪈㪇 㪠㪤㪔㪈㪇㫄㪘 㪠㪝㪔㪇㪅㪌㪘 㪈 㪈㫄㫊 㪝㪦㪩㪮㪘㪩㪛㩷㪧㪦㪮㪜㪩 㪛㪠㪪㪪㪠㪧㪘㪫㪠㪦㪥㪑㪧㪽㩿㪮㪀 㪫㪩㪘㪥㪪㪠㪜㪥㪫 㪫㪟㪘㪜㪩㪤㪘㪣㩷㪠㪤㪧㪜㪛㪘㪥㪚㪜㪑㪩㫋㪿㩷㩿㷄㪆㪮㪀 㪧㪜㪘㪢㩷㪪㪬㪩㪞㪜 㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪝㪪㪤㩿㪘㪀 㪠㪽㫊㫄 㪈㪇㪇 㪉 㪈㪇㪇㪇 㪉㪌㪇 㪈㪇 㪥㪬㪤㪙㪜㪩㩷㪦㪝㩷㪚㪰㪚㪣㪜㪪 㪠㪝㪪㪤㪄㪚㪰㪚㪣㪜㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㫋㫉㫉㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪊㪇㪇 㪊㪇 㪫㪸㪔㪉㪌㷄 㪽㪔㪈㪤㪟㫑 㪭㪩㪔㪇㪭 㫅㪔㪈㪇㫇㪺㫊 㪉㪋㪇 㪠㪩㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪉㪇㪇 㪌 㪈㪇 㪈㪌 㪉㪇 㪉㪌 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪩㩿㪭㪀 㪭㪩㪄㪚㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪉㪌㪇 㪊㪇 㪉㪏 㪉㪍 㪉㪋 㪉㪉 㪉㪇 㪈㪏 㪈㪍 㪈㪋 㪈㪉 㪈㪇 㪏 㪍 㪋 㪉 㪇 㪭㪝㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪈㪌㪇 㪈㪇 㪋㪇 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥 㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀 㪉㪇㪇 㪋㪇㪇 㪝㪦㪩㪮㪘㪩㪛㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪝㩿㫄㪭㪀 㪭㪝㪄㪠㪝㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪧㪜㪘㪢㩷㪪㪬㪩㪞㪜 㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪝㪪㪤㩿㪘㪀 㪇 㪈㪇㪇 㪈 㪇㪅㪇㪈 㪇㪅㪇㪇㪈 㪧㪜㪘㪢㩷㪪㪬㪩㪞㪜 㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪝㪪㪤㩿㪘㪀 㪽㪔㪈㪤㪟㫑 㪈㪇㪇㪇㪇 㪫㪸㪔㪈㪉㪌㷄 㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪝㩿㪘㪀 㪈㪇㪇㪇 㪫㪸㪔㪎㪌㷄 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥 㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀 㪈 㪇㪅㪈 㪛㪚 㪈 㩷 㪇㪅㪌 㫋㫀㫄㪼 㪊㪇㪇㫌㫊 㪇㪅㪈 㪇㪅㪇㪈 㪛㪔㪈㪆㪉 㪪㫀㫅㩿㱔䋽㪈㪏㪇㪀 㪈 㪈㪇 㪈㪇㪇 㪫㪠㪤㪜㪑㫋㩿㫊㪀 㪩㫋㪿㪄㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪇 㪈㪇㪇㪇 㪇 㪇㪅㪌 㪈 㪈㪅㪌 㪘㪭㪜㪩㪘㪞㪜㩷㪩㪜㪚㪫㪠㪝㪠㪜㪛 㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫䋺㪠㫆㩿㪘㪀 㪠㫆㪄㪧㪽㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 Rev.B 㪉 2/3 RB160L-40 Diodes 㪈 㪘㪭㪜㪩㪘㪞㪜㩷㪩㪜㪚㪫㪠㪝㪠㪜㪛 㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㫆㩿㪘㪀 㪇㪅㪍 㪛㪔㪈㪆㪉 㪛㪚 㪇㪅㪋 㪇㪅㪉 㪛㪚 㪉 㪠㫆 㫋 㪛㪔㪈㪆㪉 㪫 㪭㪩 㪛㪔㫋㪆㪫 㪭㪩㪔㪉㪇㪭 㪫㫁㪔㪈㪌㪇 㪈㪅㪌 㪈 㪇㪅㪌 㪪㫀㫅㩿㱔䋽㪈㪏㪇㪀 㪠㫆 㪇㪘 㪇㪭 㪉㪅㪌 㪘㪭㪜㪩㪘㪞㪜㩷㪩㪜㪚㪫㪠㪝㪠㪜㪛 㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㫆㩿㪘㪀 㪇㪘 㪇㪭 㪉㪅㪌 㪇㪅㪏 㪩㪜㪭㪜㪩㪪㪜㩷㪧㪦㪮㪜㪩 㪛㪠㪪㪪㪠㪧㪘㪫㪠㪦㪥㪑㪧㪩㩷㩿㪮㪀 㪊 㪊 㪛㪚 㪉 㫋 㪛㪔㪈㪆㪉 㪫 㪭㪩 㪛㪔㫋㪆㪫 㪭㪩㪔㪉㪇㪭 㪫㫁㪔㪈㪌㪇 㪈㪅㪌 㪈 㪇㪅㪌 㪪㫀㫅㩿㱔䋽㪈㪏㪇㪀 㪪㫀㫅㩿㱔䋽㪈㪏㪇㪀 㪇 㪇 㪈㪇 㪉㪇 㪊㪇 㪋㪇 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪩㩿㪭㪀 㪭㪩㪄㪧㪩㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪇 㪇 㪇 㪉㪌 㪌㪇 㪎㪌 㪈㪇㪇 㪈㪉㪌 㪘㪤㪙㪠㪜㪥㪫㩷㪫㪜㪤㪧㪜㪩㪘㪫㪬㪩㪜㪑㪫㪸㩿㷄㪀 㪛㪼㫉㪸㫋㫀㫅㪾㩷㪚㫌㫉㫍㪼䍼㩿㪠㫆㪄㪫㪸㪀 㪈㪌㪇 㪇 㪉㪌 㪌㪇 㪎㪌 㪈㪇㪇 㪈㪉㪌 㪈㪌㪇 㪚㪘㪪㪜㩷㪫㪜㪤㪧㪘㪩㪘㪫㪬㪩㪜㪑㪇㪫㩿㷄㪀 㪛㪼㫉㪸㫋㫀㫅㪾㩷㪚㫌㫉㫍㪼䍼㩿㪠㫆㪄㪫㪺㪀 㪜㪣㪜㪚㪫㪩㪦㪪㪫㪘㪫㪠㪚 㪛㪠㪪㪚㪟㪘㪩㪞㪜㩷㪫㪜㪪㪫㩷㪜㪪㪛㩿㪢㪭㪀 㪊㪇 㪥㫆㩷㪹㫉㪼㪸㫂㩷㪸㫋㩷㪊㪇㫂㪭 㪉㪌 㪉㪇 㪈㪌 㪈㪇 㪌 㪘㪭㪜㪑㪏㪅㪎㪇㫂㪭 㪇 㪚㪔㪉㪇㪇㫇㪝 㪩㪔㪇㱅 㪚㪔㪈㪇㪇㫇㪝 㪩㪔㪈㪅㪌㫂㱅 㪜㪪㪛㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 Rev.B 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1