Reliability Report

AOS Semiconductor
Product Reliability Report
AO6604,
rev B
Plastic Encapsulated Device
ALPHA & OMEGA Semiconductor, Inc
www.aosmd.com
This AOS product reliability report summarizes the qualification result for AO6604.
Accelerated environmental tests are performed on a specific sample size, and then followed
by electrical test at end point. Review of final electrical test result confirms that AO6604
passes AOS quality and reliability requirements. The released product will be categorized by
the process family and be monitored on a quarterly basis for continuously improving the
product quality.
Table of Contents:
I.
II.
III.
IV.
Product Description
Package and Die information
Environmental Stress Test Summary and Result
Reliability Evaluation
I. Product Description:
The AO6604 uses advanced trench technology to provide excellent RDS(ON) and low gate
charge. This device is suitable for use as a load switch or in PWM applications. The source
leads are separated to allow a Kelvin connection to the source, which may be used to bypass
the source inductance.
-RoHS Compliant
-Halogen Free
Detailed information refers to datasheet.
II. Die / Package Information:
AO6604
Standard sub-micron
20V Complementary MOSFET
Package Type
TSOP6
Lead Frame
Cu
Die Attach
Ag Epoxy
Bonding Wire
Au wire
Mold Material
Epoxy resin with silica filler
MSL (moisture sensitive level) Level 1 based on J-STD-020
Process
Note * based on information provided by assembler and mold compound supplier
III. Result of Reliability Stress for AO6604
Test Item
Test Condition
Time
Point
MSL
Precondition
168hr 85°c
/85%RH +3 cycle
reflow@260°c
-
HTGB
Temp = 150 c,
Vgs=100% of
Vgsmax
168hrs
500 hrs
1000 hrs
HTRB
HAST
Pressure Pot
Temperature
Cycle
Temp = 150 c,
Vds=80% of
Vdsmax
168hrs
500 hrs
1000 hrs
Lot
Attribution
Total
Sample
size
Number
of
Failures
Standard
27 lots
4917 pcs
0
JESD22A113
6 lots
3 lots
2 lots
(Note A*)
847pcs
0
JESD22A108
6 lots
3 lots
2 lots
(Note A*)
847pcs
0
JESD22A108
990 pcs
0
JESD22A110
77pcs / lot
77pcs / lot
130 +/- 2c,
85%RH, 33.3 psi,
Vgs = 100% of
Vgs max
121c, 29.7psi,
RH=100%
100 hrs
18 lots
96 hrs
(Note A*)
24 lots
55 pcs / lot
1848 pcs
0
JESD22A102
-65c to 150c,
air to air
250 / 500
cycles
(Note A*)
27 lots
77 pcs / lot
2079 pcs
0
JESD22A104
(Note A*)
77 pcs / lot
Note A: The reliability data presents total of available generic data up to the published date.
IV. Reliability Evaluation
FIT rate (per billion): 5
MTTF = 22346 years
The presentation of FIT rate for the individual product reliability is restricted by the actual
burn-in sample size of the selected product (AO6604). Failure Rate Determination is based
on JEDEC Standard JESD 85. FIT means one failure per billion hours.
2
9
Failure Rate = Chi x 10 / [2 (N) (H) (Af)]
9
= 1.83 x 10 / [2x (12x77x168 +6x77x500+4x77x1000) x258] = 5
9
8
MTTF = 10 / FIT = 1.96 x 10 hrs = 22346 years
Chi²= Chi Squared Distribution, determined by the number of failures and confidence interval
N = Total Number of units from HTRB and HTGB tests
H = Duration of HTRB/HTGB testing
Af = Acceleration Factor from Test to Use Conditions (Ea = 0.7eV and Tuse = 55°C)
Acceleration Factor [Af] = Exp [Ea / k (1/Tj u – 1/Tj s)]
Acceleration Factor ratio list:
Af
55 deg C
70 deg C
85 deg C
100 deg C
115 deg C
130 deg C
150 deg C
258
87
32
13
5.64
2.59
1
Tj s = Stressed junction temperature in degree (Kelvin), K = C+273.16
Tj u = The use junction temperature in degree (Kelvin), K = C+273.16
-5
K = Boltzmann’s constant, 8.617164 X 10 eV / K