Reliability Report

Alpha & Omega Semiconductor
Product Reliability Report
AO4478/AO4478L,
rev A
Plastic Encapsulated Device
ALPHA & OMEGA Semiconductor, Inc
495 Mercury Drive
Sunnyvale, CA 94085
U.S.
Tel: (408) 830-9742
www.aosmd.com
1
This AOS product reliability report summarizes the qualification result for AO4478. Accelerated
environmental tests are performed on a specific sample size, and then followed by electrical test
at end point. Review of final electrical test result confirms that AO4478 passes AOS quality and
reliability requirements. The released product will be categorized by the process family and be
monitored on a quarterly basis for continuously improving the product quality.
Table of Contents:
I.
II.
III.
IV.
V.
Product Description
Package and Die information
Environmental Stress Test Summary and Result
Reliability Evaluation
Quality Assurance Information
I. Product Description:
The AO4478/L uses advanced trench technology to provide excellent RDS(ON) and low gate charge.
This device is suitable for use as general purpose, PWM and a load switch appliations.
-
RoHS compliant
Halogen Free
2
II. Die / Package Information:
Process
Package Type
Lead Frame
Die Attach
Bond wire
Mold Material
Filler % (Spherical/Flake)
Flammability Rating
Backside Metallization
Moisture Level
AO4478
Standard sub-micron
low voltage N channel process
8 leads SOIC
Copper with Solder Plate
Ag epoxy
Au 2 mils
Epoxy resin with silica filler
90/10
UL-94 V-0
Ti / Ni / Ag
Up to Level 1 *
AO4478L (Green Compound)
Standard sub-micron
low voltage N channel process
8 leads SOIC
Copper with Solder Plate
Ag epoxy
Au 2 mils
Epoxy resin with silica filler
100/0
UL-94 V-0
Ti / Ni / Ag
Up to Level 1*
Note * based on info provided by assembler and mold compound supplier
III. Result of Reliability Stress for AO4478 (Standard) & AO4478L (Green)
Test Item
Test Condition
Time
Point
Lot Attribution
Total
Sample
size
Solder
Reflow
Precondition
Standard: 1hr PCT+3
cycle reflow@260°c
Green: 168hr 85°c /85RH
+3 cycle reflow@260°c
Temp = 150°c ,
Vgs=100% of Vgsmax
0hr
Standard: 49 lots
Green: 16 lots
9625 pcs
HTGB
168 / 500
hrs
1lots
(note A*)
1000 hrs
HTRB
Temp = 150°c ,
Vds=80% of Vdsmax
168 / 500
hrs
1lots
Pressure Pot
Temperature
Cycle
130 +/- 2°c , 85%RH,
33.3 psi, Vgs = 80% of
Vgs max
121°c , 29.7 psi,
RH=100%
-65°c to 150°c ,
air to air, 0.5hr per cycle
100 hrs
96 hrs
250 / 500
cycles
0
77+5 pcs /
lot
82 pcs
0
(note A*)
77+5 pcs /
lot
Standard: 33 lots
Green: 13 lots
2530 pcs
0
50+5 pcs /
lot
3575 pcs
0
50+5 pcs /
lot
3520 pcs
0
1000 hrs
HAST
82 pcs
Number
of
Failures
0
(note B**)
Standard: 49 lots
Green: 16 lots
(note B**)
Standard: 49 lots
Green: 15 lots
(note B**)
50+5 pcs /
lot
3
III. Result of Reliability Stress for AO4478 (Standard) & AO4478L (Green)
Continues
DPA
Internal Vision
Cross-section
X-ray
CSAM
NA
5
5
5
5
5
5
0
NA
5
5
0
Bond Integrity
Room Temp
150°c bake
150°c bake
0hr
250hr
500hr
40
40
40
40 wires
40 wires
40 wires
0
Solderability
230°c
5 sec
15
15 leads
0
Die shear
150°c
0hr
10
10
0
Note A: The HTGB and HTRB reliability data presents total of available AO4478 and AO4478L
burn-in data up to the published date.
Note B: The pressure pot, temperature cycle and HAST reliability data for AO4478 and AO4478L
comes from the AOS generic package qualification data.
IV. Reliability Evaluation
FIT rate (per billion):10.81
MTTF =10558years
In general, 500 hrs of HTGB, 150 deg C accelerated stress testing is equivalent to 15 years of
lifetime at 55 deg C operating conditions (by applying the Arrhenius equation with an activation
energy of 0.7eV and 60% of upper confidence level on the failure rate calculation). AOS QRA
group also routinely monitors the product reliability up to 1000 hr at and performs the necessary
failure analysis on the units failed for reliability test(s).
The presentation of FIT rate for the individual product reliability is restricted by the actual burn-in
sample size of the selected product (AO4478). Failure Rate Determination is based on JEDEC
Standard JESD 85. FIT means one failure per billion hours.
= Chi2 x 109 / [2 (N) (H) (Af)]
= 1.83 x 109 / [2 (2×164) (1000) (258) =10.81
9
MTTF = 10 / FIT = 9.25 x 107hrs = 10558 years
Failure Rate
Chi² = Chi Squared Distribution, determined by the number of failures and confidence interval
N = Total Number of units from HTRB and HTGB tests
H = Duration of HTRB/HTGB testing
Af = Acceleration Factor from Test to Use Conditions (Ea = 0.7eV and Tuse = 55°C)
Acceleration Factor [Af] = Exp [Ea / k ( 1/Tj u – 1/Tj s )]
Acceleration Factor ratio list:
Af
55 deg C
70 deg C
85 deg C
100 deg C
115 deg C
130 deg C
150 deg C
258
87
32
13
5.64
2.59
1
Tj s = Stressed junction temperature in degree (Kelvin), K = C+273.16
Tj u = The use junction temperature in degree (Kelvin), K = C+273.16
k = Boltzmann’s constant, 8.617164 X 10-5eV / K
4
V. Quality Assurance Information
Acceptable Quality Level for outgoing inspection: 0.1% for electrical and visual.
Guaranteed Outgoing Defect Rate: < 25 ppm
Quality Sample Plan: conform to Mil-Std-105D
5