Rev. B FEATURES APPLICATIONS ● Low Ripple & Noise ● Single and Dual Outputs ● High Efficiency up to 81% ● External ON/OFF Control ● Output Current up to 500mA ● 2:1 Wide Input Voltage Range ● UL94-V0 Case Potting Materials ● 2 Watts Maximum Output Power ● Continuous Short Circuit Protection ● Switching Frequency (100KHz, min) ● Input to Output Isolation up to 1KVDC ● SIP Package: 0.86 x 0.36 x 0.44 Inches ● ISO9001 Certified Manufacturing Facilities ● Compliant to RoHS EU Directive 2002/95/EC ● No External Input and Output Capacitor Needed ● UL60950-1, EN60950-1, and IEC60950-1 Licensed ● CE Mark Meets 2006/95/EC, 93/68/EEC, and 2004/108/EC ● Wireless Networks ● Telecom/Datacom ● Industry Control Systems ● Semiconductor Equipment LANEW Series 2 Watt DC/DC Converter Single and Dual Outputs 2:1 Wide Input Voltage Range DESCRIPTION The LANEW series offers 2 watts of output power from a 0.86 x 0.36 x 0.44 inch package without derating to 85ºC and without external input/output capacitors. The LANEW series has 2:1 wide input voltage ranges of 4.5-9, 9-18, 18-36 and 36-75VDC and features 1000VDC of isolation and shortcircuit protection. The LANEW series meets EN60950 and UL60950 requirements. All models are particularly well suited to telecommunications, industrial, mobile telecom and test equipment applications. SPECIFICATIONS: LANEW Series All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS 5V nominal input 4.5 – 9 VDC 12V nominal input 9 – 18 VDC Input Voltage Range 24V nominal input 18 – 36 VDC 48V nominal input 36 – 75 VDC Input Current See Table Input Filter Capacitor Type 5V nominal input 15 VDC 12V nominal input 36 VDC Input Surge Voltage (100ms max) 24V nominal input 50 VDC 48V nominal input 100 VDC 5V nominal input (10μF / MLCC) 400mAp-p, max Input Reflected Ripple Current 12V nominal input (10μF / MLCC) 150mAp-p, max (There is an external capacitor at input (See Note 7)) 24V nominal input (2.2μF / MLCC) 380mVp-p, max 48V nominal input (2.2μF / MLCC) 170mVp-p, max Start Up Time Power Up 1ms, typ (Nominal Vin and constant resistive Load) Remote ON/OFF 1ms, typ DC-DC ON Open or high impedance DC-DC OFF Control pin applied current 4 ~ 8mA max (via 1KΩ) Remote OFF Input Current (nominal input) 2.5mA, max Application Circuit Remote ON/OFF OUTPUT SPECIFICATIONS Output Voltage Voltage Accuracy Line Regulation Load Regulation (min load to full load) Cross Regulation (Dual) Minimum Load (See Note 6) Full load and nominal Vin Low line to high line at full load Single Output (3.3Vout) Single Output (Others) Dual Output Asymmetrical load 25% / 100% FL Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 See Table ±1% ±0.5% ±0.85% ±0.75% ±1% ±5% See table LANEW Series 2 Watt DC/DC Converter Single and Dual Outputs 2:1 Wide Input Voltage Range Rev. B SPECIFICATIONS (CONTINUED) OUTPUT SPECIFICATIONS (CONTINUED) Output Power Output Current Ripple & Noise (20MHz bandwidth) Transient Response Recovery Time PROTECTION Short Circuit Protection GENERAL SPECIFICATIONS Efficiency Switching Frequency Isolation Voltage (input to output) Insulation Resistance Isolation Capacitance ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Relative Humidity Temperature Coefficient Thermal Shock Vibration MTBF (see Note 1) 2 Watts max. See Table 50mVp-p 500μs, typ. 25% load step change Continuous, automatic recovery See Table 100KHz, min. 1000VDC min. 10GΩ min. 200pF max. Full load to minimum load -40°C to +85°C (with derating) -55°C to +105°C 5% to 95% RH ±0.2% / °C max. MIL-STD-810F MIL-STD-810F 5,107,000 hours 2,886,000 hours BELLCORE TR-NWT-000332 MIL-HDBK-217F PHYSICAL SPECIFICATIONS Weight 4.8 grams (0.17oz) 0.86 x 0.36 x 0.44 inches 21.8 x 9.1 x 11.2 mm Non-conductive black plastic None Silicon (UL94-V0) Dimensions (LxWxH) Case Material Base Material Potting Material SAFETY & EMC Safety Approvals and Standards EMI (see Note 8) EN55022 ESD EN61000-4-2 Radiated Community Fast Transient (see Note 9) Surge (see Note 9) Conducted Immunity EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 IEC60950-1, UL60950-1, EN60950-1 Class A Air Contact ± 8KV ± 6KV 10 V/m ± 2KV ± 1 KV 10 Vrms Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Perf. Criteria A Perf. Criteria A Perf. Criteria B Perf. Criteria A Perf. Criteria A LANEW Series 2 Watt DC/DC Converter Single and Dual Outputs 2:1 Wide Input Voltage Range Rev. B OUTPUT VOLTAGE / CURRENT RATING CHART Model Number LANEW533R LANEW505R LANEW509R LANEW512R LANEW515R LANEW505RD LANEW512RD LANEW515RD LANEW1233R LANEW1205R LANEW1209R LANEW1212R LANEW1215R LANEW1205RD LANEW1212RD LANEW1215RD LANEW2433R LANEW2405R LANEW2409R LANEW2412R LANEW2415R LANEW2405RD LANEW2412RD LANEW2415RD LANEW4833R LANEW4805R LANEW4809R LANEW4812R LANEW4815R LANEW4805RD LANEW4812RD LANEW4815RD Input Range 5 VDC (4.5 – 9 VDC) 12 VDC (9 – 18 VDC) 24 VDC (18 – 36 VDC) 48 VDC (36 – 75 VDC) Output Voltage 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC Output Current Min. load Full load 50mA 500mA 40mA 400mA 22mA 222mA 17mA 167mA 13mA 134mA ±20mA ±200mA ±8mA ±83mA ±7mA ±67mA 50mA 500mA 40mA 400mA 22mA 222mA 17mA 167mA 13mA 134mA ±20mA ±200mA ±8mA ±83mA ±7mA ±67mA 50mA 500mA 40mA 400mA 22mA 222mA 17mA 167mA 13mA 134mA ±20mA ±200mA ±8mA ±83mA ±7mA ±67mA 50mA 500mA 40mA 400mA 22mA 222mA 17mA 167mA 13mA 134mA ±20mA ±200mA ±8mA ±83mA ±7mA ±67mA Input Current (5) Efficiency (6) 540mA 615mA 596mA 588mA 582mA 645mA 595mA 598mA 202mA 234mA 222mA 219mA 220mA 242mA 224mA 226mA 102mA 115mA 109mA 109mA 108mA 117mA 112mA 110mA 52mA 60mA 56mA 55mA 55mA 62mA 57mA 57mA 65% 69% 71% 72% 73% 66% 71% 71% 72% 75% 79% 80% 80% 73% 78% 78% 71% 76% 80% 80% 81% 75% 78% 80% 70% 74% 78% 80% 79% 75% 77% 77% Capacitor (7) Load max 2200uF 1000uF 470uF 170uF 110uF ±470uF ±100uF ±47uF 2200uF 1000uF 470uF 170uF 110uF ±470uF ±100uF ±47uF 2200uF 1000uF 470uF 170uF 110uF ±470uF ±100uF ±47uF 2200uF 1000uF 470uF 170uF 110uF ±470uF ±100uF ±47uF NOTES: 1. The LANEW Series requires a minimum 10% loading at the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specifications. 2. It will not damage the device without inserting external input capacitors. There is a smaller reflected ripple current when a capacitor is put at the input. The capacitor recommended is “CHEMICON” LXZ series or equivalent for 05 & 12Vin and “CHEMICON” KMF series or equivalent for 24 & 48Vin. 3. BELLCORE TR-NWT-000332. Case: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment). 4. The LANEW series meet EN55022 classes A with a filter at input. The filter capacitor recommended is same as Note 2. 5. Maximum value at nominal input voltage and full load. 6. Typical value at nominal input voltage and full load. 7. Test by minimum Vin and constant resistive load. *Due to advances in technology, specifications are subject to change without notice. Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 LANEW Series 2 Watt DC/DC Converter Single and Dual Outputs 2:1 Wide Input Voltage Range Rev. B DERATING CURVE & EFFICIENCY GRAPHS LANEW48S33R Efficiency VS Input Voltage LANEW48S33R Derating Curve 72 71 70 EFFICIENCY (%) OUTPUT POWER (%) 100 75 Natural Convection 50 25 69 68 67 66 65 60 55 50 0 -40 -25 -10 0 50 60 70 85 90 36 100 45 50 LANEW48S33R Efficiency vs Output Load 75 70 65 60 55 50 45 40 35 10 20 30 40 50 60 55 60 INPUT VOLTAGE (V) AMBIENT TEMPERATURE (ºC) EFFICIENCY(%) 40 70 80 90 100 OUTPUT LOAD (% of Full Load) Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 65 70 75 LANEW Series 2 Watt DC/DC Converter Single and Dual Outputs 2:1 Wide Input Voltage Range Rev. B MECHANICAL DRAWING Pin 1 2 3 5 6 7 8 Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PIN CONNECTION Single Output Dual Output -INPUT -INPUT +INPUT +INPUT CTRL CTRL NC NC +OUTPUT +OUTPUT -OUTPUT COMMON NC -OUTPUT