Synthesizer Part LCFS1069 Datasheet

Model # LCFS1069
375 to 750 MHz Frequency Synthesizer
Low Phase Noise in a Lower Cost Package
Features
• Low Phase Noise: -116 dBc/Hz (100 kHz offset)
• External Reference Oscillator (Internal Ref. Option at No Extra Charge)
• No User Programming Required
• Integrated Microcontroller Look-up Table
• Customized Parallel or Serial Programming Available
• 3 Additional Complementary Output Lines are Available
API Technologies’ Model LCFS1069 frequency synthesizer combines a monolithic integer-n microwave synthesizer, and
a microcontroller to provide an economical frequency source solution. Complex serial register programming is not
required. A built-in lookup table in the microcontroller allows for simplified frequency programming with a dual 8-bit
binary frequency selection word. Either parallel or serial programming can be accommodated.
Technical Specifications
Parameter
Maximum (No Damage) Ratings
Typical
Min/Max
375 to 750 MHz
375 to 750 MHz
+13 dBm
-
0 to +13 dBm
0 to +13 dBm
10 MHz
-
-98 dBc/Hz @ 1 kHz
-98 dBc/Hz @ 10 kHz
-116 dBc/Hz @ 100 kHz
-145 dBc/Hz @ 1 MHz
-168 dBc/Hz @ 10 MHz
-
3.3 volt logic
-
Locking Speed
200 μsec
-
Spurious
-40 dBc
-
Harmonics
-20 dBc
-
1.75:1
2.0:1
Frequency Range
Output Power
External Reference Input
Power Requirement (CW)
Step Size
SSB Phase Noise**
Digital Lock Indicator
Output VSWR
Optional Binary
Divided Output
Storage Temperature
-55°C to +125°C
Operating Temperature
-40°C to +85°C
DC Voltage
+5 volts
Notes: Typical values are measured at 25°C,
but not guaranteed. Single output model.
Up to 4 Optional Outputs*
• One Output line: 150 mA*
• Two Output Lines: 225 mA
• Three Output Lines: 300 mA
• Four Output Lines: 375 mA
Mechanical & Electrical
2,4,8,16,32,64,128
DC Supply Voltage
+3.3 volts
(+/- 2%) volts
DC Supply Current*
150 mA*
---
** SSB phase noise dependent on the input reference performance.
Parameter
Specification
Specification
Temperatures (Min/Max)
-20°C to +70°C
Housing Size
0.800” L x 0.800” W x 0.130” H
Housing Drawing
LC800
Package Type
Surface Mount
Rev Date: 9/25/2014
© API Technologies Corp. Proprietary Information
Page # 1
|
www.apitech.com
|
micro.apitech.com
|
+1.888.553.7531
|
[email protected]
Model # LCFS1069
Typical Performance
Output Power (dBm)
0
15
-20
14
-40
13
-60
12
(dBm)
(dBc/Hz @ 750 MHz)
Phase Noise (dBc/Hz)
-80
-100
11
10
9
-120
8
-140
7
-160
-180
1000
1 kHz
6
5
10000
10
kHz
100000
100
kHz
11000000
MHz
1010000000
MHz
375
425
475
525
575
625
675
725
775
Frequency (MHz)
Offset from the Carrier
Notes
1. Specifications labeled “min.” or “max.” are guaranteed in a 50 Ohm
system over the specified temperature range.
2. Output frequency and step size must be specified.
3. Other input voltages are available.
Outline Drawing
(LC800 Package)
Rev Date: 9/25/2014
© API Technologies Corp. Proprietary Information
Page # 2
|
www.apitech.com
|
micro.apitech.com
|
+1.888.553.7531
|
[email protected]