Dispersive Steel Delay Lines Key Features • Frequency Range: 5 MHz to 65 MHz • Delay: 10 µ Sec to 350 µSec • Insertion Loss: 20-45 dB • Stability: 1 ppm/degc • Bandwidth: > 50% • Package Size: Up to 6” X 72”; Dependent on frequency and amount of delay API Technologies' complete line of pulse compression Dispersive Steel Delay Lines are offered in semi-standard or custom designs to meet unique specifications. Dispersive Steel delay lines can be heated for stability. Many interface options are offered including SMA (Female and Male), N-Type (Female), TNC (Female), Leaded and SMD. Packaging options include non or hermetically welded and package size is up to 6” x 72”. These delay lines are ideal for applications where high performance and reliability is required. Excellent for usage Real Time Signal processing, Linear & Non-Linear FM generation, Spectral analysis. Technical Specifications Maximum Ratings Parameter Unit Typical Min/Max Frequency Range MHz 20 5-65 Delay usec 100 10-350 dB 30 20-45 PPM/degC 1 .5-1.5 % 50 10-75 Spurious dBc -60 75 Triple Travel dB -60 75 Feed Through dB -60 80 Insertion Loss Temp Stability Bandwidth Maximum (No Damage) Ratings Storage Temperature(C) -40 to 90 Operating Temperature(C) -30 to 80 Input Drive @ 25°C (CW) dBm * Typical values are measured at 25°C, but not guaranteed. Rev Date: 1/28/2015 © API Technologies Corp. Proprietary Information +20 Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Outline Drawing Rev Date: 1/28/2015 © API Technologies Corp. Proprietary Information Page # 2 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]