Model # BXHF1081 High Frequency Microwave Amplifier Frequency Range: 2-10 GHz Features • High Frequency and Broad Bandwidth: 2-10 GHz • Low Noise Figure: 1.5 dB Typical • Laser Welded Housing for Ultimate Environmental Protection • EAR99 Model BXHF1081 is a high frequency amplifier covering 2-10 GHz. This design utilizes a laser sealed housing for superior environmental protection. This standard design may also be ordered in a screened MIL-STD-883 version (Model #SXHF1081.) All specification ratings are based on measurements in a 50 Ω (ohm) system with a DC supply voltage tolerance of +/- 2%. Technical Specifications Maximum Ratings Parameter Unit Typical Min/Max Frequency Range GHz 2-10 2-10 Gain dB 16 Noise Figure dB Output Power @ 1 dB Compression Maximum (No Damage) Ratings Storage Temperature -55°C to +85°C 14 Operating Temperature -40°C to +85°C 1.5 2.5 DC Voltage @ 25°C +15 volts dBm 17 16 Input Drive @ 25°C (CW) +13 dBm Output 3rd Order Intercept dBm 23 - Output 2nd Order Intercept dBm 31 - Reverse Isolation dB 35 - Input VSWR --- 1.5:1 2.0:1 Output VSWR --- 1.5:1 2.0:1 Supply Voltage volts +12 +12 Supply Current mA 65 85 * Typical values are measured at 25°C, but not guaranteed. Mechanical & Electrical Parameter Specification Specification Temperatures (Min/Max) -20°C to +70°C Housing Size 0.870” L x 1.060” W x 0.300” H Housing Drawing HF1 Package RF Connectors SMA Female Replaceable Connectors Rev Date: 1/29/2016 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BXHF1081 Technical Performance Rev Date: 1/29/2016 © API Technologies Corp. Proprietary Information Page # 2 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BXHF1081 Instructions Grounding Instructions Care should be taken to effectively ground each unit. Revisions API reserves the right to make revisions to both product and/or the information contained within their datasheets without advanced notice. Min./Max. Values Specifications are guaranteed when tested in a 50 Ω (ohm) system. Typical performance graphs and values are measured at 25°C, but not guaranteed. Outline Drawing (For Reference Only) Rev Date: 1/29/2016 © API Technologies Corp. Proprietary Information Page # 3 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]