Model # BXHF1201 High Frequency Microwave Amplifier Frequency Range: 10-18 GHz Features • High Frequency and Broad Bandwidth: 10-18 GHz • High Output Power: +26 dBm Typical • Laser Welded Housing for Ultimate Environmental Protection • Internal Voltage Regulator • RoHS Compliant Option: Model BXHF1201LF Model BXHF1201 is a high frequency amplifier covering 10-18 GHz. This design utilizes a laser sealed housing for superior environmental protection. This standard design may also be ordered in a screened MIL-STD-883 version (Model #SXHF1201.) All specification ratings are based on measurements in a 50 Ω (ohm) system with a DC supply voltage tolerance of +/- 2%. Technical Specifications Maximum Ratings Parameter Unit Typical Min/Max Frequency Range GHz 10-18 10-18 Gain dB 11 Noise Figure dB Output Power @ 1 dB Compression Maximum (No Damage) Ratings Storage Temperature -55°C to +85°C 10 Operating Temperature -40°C to +85°C 4.0 6.0 DC Voltage @ 25°C +18 volts dBm +26 - Input Drive @ 25°C (CW) +13 dBm Output 3rd Order Intercept dBm 35 - Output 2nd Order Intercept dBm 55 - Reverse Isolation dB 35 - Input VSWR --- 1.5:1 2.0:1 Output VSWR --- 1.5:1 2.0:1 Supply Voltage volts +12 to +15 +12 to +15 Supply Current mA 370 400 • Typical values are measured at 25°C, but not guaranteed. • Intercept values are measured at midband frequencies. Mechanical & Electrical Parameter Specification Specification Temperatures (Min/Max) -20°C to +70°C Housing Size 1.500” L x 1.060” W x 0.300” H Housing Drawing HF2 Package RF Connectors SMA Female Replaceable Connectors Rev Date: 1/7/2015 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BXHF1201 Typical Performance Graphs Rev Date: 1/7/2015 © API Technologies Corp. Proprietary Information Page # 2 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BXHF1201 Instructions Grounding Instructions Care should be taken to effectively ground each unit. Revisions API reserves the right to make revisions to both product and/or the information contained within their datasheets without advanced notice. Min./Max. Values Specifications are guaranteed when tested in a 50 Ω (ohm) system. Typical performance graphs and values are measured at 25°C, but not guaranteed. Outline Drawing Rev Date: 1/7/2015 © API Technologies Corp. Proprietary Information Page # 3 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]