Model # WN3119 Standard RF Amplifier Frequency Range: 1 to 200 MHz Features • High Output Power: +27.5 dBm • High IP2: +60 dBm • Low Frequency Operation • Unconditionally Stable Model WN3119 is a low frequency amplifier covering 1 to 200 MHz. This design utilizes a hermetic gullwing surface-mount package for superior environmental protection. This standard design may also be ordered in a screened MIL-STD-883 version (Model #SWN3119) All specification ratings are based on measurements in a 50 Ω (ohm) system with a DC supply voltage tolerance of +/- 2%. Technical Specifications • • Absolute Maximum Ratings Parameter Unit Typical Min/Max Frequency Range MHz 1 to 200 MHz 1 to 200 MHz Gain dB 10.5 9.0 Min. Gain Flatness dB +/- 1.0 --- Noise Figure dB 5.5 7.0 Max. Output Power @ 1 dB Compression dBm 27.5 26 Min. Output 3rd Order Intercept dBm 42 --- Output 2nd Order Intercept dBm 60 --- Parameter Reverse Isolation dB 17 --- Input VSWR --- 1.25:1 2.0:1 Max. Specification Temperatures (Min/Max) -55°C to +85°C Output VSWR --- 1.35:1 2.0:1 Max. Package Size 0.625” Square Supply Voltage volts +15 +15 Supply Current mA 200 210 Max. Maximum (No Damage) Ratings Storage Temperature -62°C to +150°C Operating Temperature -55°C to +85°C DC Voltage @ 25°C +18 volts Input Drive @ 25°C (CW) +18 dBm Mechanical & Electrical Specification Package Drawing RF Connectors SG4 10 Pins Typical values are measured at 25°C, but not guaranteed IP3 and IP2 values are tested at 30 MHz at 25C. Rev Date: 8/4/2014 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]