RF AMPLIFIER MODEL BXMP1027 Available as: BXMP1027, SMA Connectorized Housing Features Typical Intermodulation Performance at 25 º C Second Order Harmonic Intercept Point.....+100 dBm (Typ.) Second Order Two Tone Intercept Point.......+95 dBm (Typ.) Third Order Two Tone Intercept Point...........+61 dBm (Typ.) Medium Gain: 10.5 dB Typical High Output Power: 4 Watts Typical High Third Order Intercept: +61 dBm Typical High Second Order Intercept: +95 dBm Typical Operating Temp. - 55 ºC to +85 ºC Environmental Screening Available Maximum Ratings Specifications CHARACTERISTIC Frequency Gain (dB) Power @ 1 dB Comp. (dBm) Reverse Isolation (dB) VSWR In Out TYPICAL Ta= 25 ºC 50 - 500 MHz MIN/MAX Ta = -55 ºC to +85 ºC 50 - 500 MHz 10.5 10.0 Min. +37.0 +33.5 Min. -17.0 1.5:1 1.5:1 ---. 2.0:1 Max. 2.0:1 Max. Noise figure (dB) 4.0 5.5 Max. Power +15 2200 +15 2500 Max. Vdc mA Ambient Operating Temperature ............. -45ºC to + 100 ºC Storage Temperature .............................. -50ºC to + 125 ºC Case Temperature ................................................ + 125 ºC DC Voltage ......................................................... + 17 Volts Continuous RF Input Power ................................ + 24 dBm Short Term RF Input Power . 400 Milliwatts (1 Minute Max.) Maximum Peak Power .................. 0.5 Watt (3 μsec Max.) Revision 11/18/2014 Note: Care should always be taken to effectively ground the case of each unit. Typical Performance Data Legend + 25 ºC + 85 ºC - - - - - - -55 ºC Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, Florida 32905 · PH (888) 553-7531 · Fax (888) 553-7532 www.spectrummicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, Pa. 19154 · PH (215) 464-4000 · Fax (215) 464-4001 4 DWG NO. 3 SH 088-00432 1 NOTES: 1. MATERIAL: ALUMINUM 2. FINISH: ELECTROLESS NICKEL 3.600 91.44 .15 3.8 .156 THRU 3.97 OF 1 REV 1 - REVISIONS ECN REV. DESCRIPTION CHNG/DATE APPVD/DATE 1503 - ENGINEERING RELEASE 2014/11/18 -- 2.98 75.6 B B API BXMP1027 2.575 65.41 IN 2X 1.54 39.1 OUT .55 14 .32 8.1 0 0 GND +15V 0 0 .28 7.2 THIS ASSEMBLY CONTAINS PARTS SENSITIVE TO DAMAGE BY ELECTROSTATIC DISCHARGE (ESD). USE ESD PRECAUTIONARY PROCEDURES WHEN TOUCHING, REMOVING OR INSERTING 2X .50 12.8 .45 11.5 CAUTION 3.90 99.1 3.53 89.5 .38 9.5 0 0 .20 5.1 .75 19.1 A .10 2.5 3rd ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED * INTERPRET DRAWING IAW ASME Y14.100-2004 * DIMENSIONING AND TOLERANCING IAW ASME Y14.5-1994 * PARENTHETICAL INFORMATION FOR REFERENCE ONLY * DIMENSIONAL LIMITS APPLY BEFORE PROCESSES * DIMENSIONS ARE IN INCHES * TOLERANCES ARE: ANGLES ±1.0° * SURFACE FINISH API TECHNOLOGIES CORP. PROPRIETARY INFORMATION 63 2 PLACE DECIMAL ±.02 4 3 DRAWN WAR CHECKED ENGRG HP MFG * REMOVE ALL BURRS AND SHARP EDGES .010 RAD MAX. * CONCENTRICITY MACHINED DIA: .002 FIM api ANSI 3 PLACE DECIMAL ±.005 THIS DOCUMENT IS THE SOLE PROPERTY OF API TECHNOLOGIES CORP. * MACHINED TOOL MISMATCH: .002 MAX. THE RELEASE OF DATA CONTAINED IN THIS DOCUMENT AND THE REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT THE WRITTEN PERMISSION OF API TECHNOLOGIES CORP. ARE PROHIBITED. DO NOT SCALE DRAWING COMPUTER ASSISTED DRAWING GENERATED USING SOLIDWORKS 2012 FORM NO. 1054 SIZE B1 A ADD -U AFTER DRAWING NUMBER TO FORM COMPLETE PART NUMBER FOR UNPLATED PART QA APPROVED 2 technologies corp. DATE 2014/11/18 PHILADELPHIA OPERATIONS 2707 BLACK LAKE PLACE, PHILADELPHIA PA. 19154 (USA) TITLE OUTLINE, BXMP1027 2014/11/18 SIZE B SCALE: CAGE CODE 60979 DWG NO. REV 088-00432 SHEET 1:1 1 1 - OF 1