Schottky Barrier Rectifier MBRF20200CT, 2x 10A, 200V, ITO-220AB, Common Cathode MBRF20200CT RoHS Pb Description Littelfuse MBR series Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications by providing high temperature, low leakage and low VF products. It is suitable for high frequency switching mode power supply, free-wheeling diodes and polarity protection diodes. Features • H igh junction temperature capability Pin out Heat sink on e • H igh frequency operation • Common cathode configuration in electrically isolated ITO220AB package • G uard ring for enhanced ruggedness and long term reliability Common Cathode • Low forward voltage drop 3 ode K e 1 2 3 1 Anode Common Anode Cathode 2 Pinout 2 TO-220AB Common Cathode • DC/DC converters • Polarity protection diodes • Free-wheeling diodes Pinout 3 ITO-220AB Common Cathode Parameters Symbol Test Conditions Max Unit VRWM - 200 V Average Forward Current IF(AV) 50% duty cycle @TC = 105°C, rectangular wave form 10(per leg) Peak Repetitive Forward Current (per Anodeleg) IFRM Rated VR, Square wave,20KHz, @TC=90°C 20 A Peak Surge 1 One Cycle Non-Repetitive 2 Current (per leg) IFSM 8.3 ms, half Sine pulse 150 A Heat sinkInverse Voltage Peak Cathode 3 • S witching mode power supply Anode Common Anode Cathode Maximum Ratings Cathode Applications 3 Cathode 20(per device) A Pinout 5 TO-220AC Electrical Characteristics Parameters Symbol Test Conditions Max VF1 @ 10A, Pulse, TJ = 25 °C 0.95 VF2 @ 10A, Pulse, TJ = 125 °C 0.85 Reverse Current at DC condition (per leg) IR1 @VR = rated VR TJ = 25 °C 1.0 Reverse Current (per leg) * IR2 @VR = rated VR TJ = 125 °C 50 Junction Capacitance (per leg) CT @VR = 5V, TC = 25 °C fSIG = 1MHz 300 pF Series Inductance (per leg) LS Measured lead to lead 5 mm from package body 8.0 nH Voltage Rate of Change dv/dt 10,000 V/μs Forward Voltage Drop (per leg) * RSM Isolation Voltage (t = 1.0 second, R. H. < =30%, TA = 25 °C) VISO Clip mounting, the epoxy body away from the heatsink edge by more than 0.110” along the lead direction. 4500 Clip mounting, the epoxy body is inside the heatsink. 3500 Screw mounting, the epoxy body is inside the heatsink. 1500 Unit V mA V * Pulse Width < 300μs, Duty Cycle <2% ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15 Schottky Barrier Rectifier MBRF20200CT, 2x 10A, 200V, ITO-220AB, Common Cathode Thermal-Mechanical Specifications Parameters Symbol Max Unit Junction Temperature TJ -55 to +175 °C -55 to +175 °C 4.5 °C/W 2 g Storage Temperature Tstg Maximum Thermal Resistance Junction to Case (per leg) RthJC Approximate Weight wt Case Style Test Conditions DC operation ITO-220AB Figure 1: Typical Forward Characteristics Figure 2: Typical Reverse Characteristics ºC ºC ºC ºC Figure 3: Typical Junction Capacitance ºC ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15 Schottky Barrier Rectifier MBRF20200CT, 2x 10A, 200V, ITO-220AB, Common Cathode Dimensions- ITO-220AB Symbol Millimeters Min Typ Max A 4.30 4.50 4.70 A1 1.10 1.30 1.50 A2 2.80 3.00 3.20 A3 2.50 2.70 2.90 b 0.50 0.60 0.75 b1 1.10 1.20 1.35 b2 1.50 1.60 1.75 b3 1.20 1.30 1.45 b4 1.60 1.70 1.85 c 0.55 0.60 0.75 D 14.80 15.00 15.20 E 9.96 10.16 10.36 2.55 e 5.10 e1 H1 6.50 6.70 6.90 L 12.70 13.20 13.70 2.00 L1 1.60 1.80 L2 0.80 1.00 1.20 L3 0.60 0.80 1.00 øP1 øP2 3.30 3.50 3.70 2.99 3.19 3.39 Q 2.50 2.70 2.90 θ1 θ2 θ3 θ4 θ5 Packing Options 5° 4° 10° 5° 5° Part Numbering and Marking System Part Number Marking Packing Mode M.O.Q MBRF20200CT MBRF20200CT 50pcs / Tube 1000 Tube Specification MBRF20200CT 6 7mm LF YYWWL MBR F 20 200 CT LF YY WW L = Device Type = Package type = Forward Current (20A) = Reverse Voltage (200V) = Configuration = Littelfuse = Year = Week = Lot Number 530mm 32mm ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15