Schottky Barrier Rectifier MBRF20200CTR, 2x 10A, 200V, ITO-220AB, Common Anode MBRF20200CTR RoHS Pb Description Heat sink Heat sink Common Cathode 1 3 Anode Anode Pinout 1 D2-PAK & D-PAK Common Cathode Common Cathode 1 3 2 Anode Common Anode Cathode Pinout 2 TO-220AB Common Cathode Pin out Littelfuse MBR series Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications by providing high temperature, low leakage and low VF products. It is suitable for high frequency switching mode power supply, free-wheeling diodes and polarity protection diodes. 1 3 2 Anode Common Anode Cathode Features • H igh junction Pinout 3 temperature capability • H igh frequency operation • Common anode configuration in electrically isolated ITO220AB package ITO-220AB • G uard ring for enhanced Common Cathode ruggedness and long term reliability Heat sink • Low forward voltage drop Cathode Applications Cathode Common Cathode Anode 1 2 3 Cathode 1 Pinout 4 ITO-220AB Common Anode • S witching mode power Anode supply 2 • Free-wheeling diodes • DC/DC converters • Polarity protection diodes Pinout 5 TO-220AC Maximum Ratings Parameters Symbol Test Conditions Max Unit Peak Inverse Voltage VRWM - 200 V Average Forward Current IF(AV) 50% duty cycle @TC = 105°C, rectangular wave form 10(per leg) Peak Repetitive Forward Current(per leg) IFRM Rated VR, Square wave,20KHz, @TC=90°C 20 A Peak One Cycle Non-Repetitive Surge Current (per leg) IFSM 8.3 ms, half Sine pulse 150 A 20(per device) A Electrical Characteristics Parameters Symbol Test Conditions Max VF1 @ 10A, Pulse, TJ = 25 °C 0.95 VF2 @ 10A, Pulse, TJ = 125 °C 0.85 Reverse Current at DC condition (per leg) IR1 @VR = rated VR TJ = 25 °C 1.0 Reverse Current (per leg) * IR2 @VR = rated VR TJ = 125 °C 50 Junction Capacitance (per leg) CT @VR = 5V, TC = 25 °C fSIG = 1MHz 300 pF Series Inductance (per leg) LS Measured lead to lead 5 mm from package body 8.0 nH Voltage Rate of Change dv/dt 10,000 V/μs Forward Voltage Drop (per leg) * RSM Isolation Voltage (t = 1.0 second, R. H. < =30%, TA = 25 °C) VISO Clip mounting, the epoxy body away from the heatsink edge by more than 0.110” along the lead direction. 4500 Clip mounting, the epoxy body is inside the heatsink. 3500 Screw mounting, the epoxy body is inside the heatsink. 1500 Unit V mA V * Pulse Width < 300μs, Duty Cycle <2% ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15 Schottky Barrier Rectifier MBRF20200CTR, 2x 10A, 200V, ITO-220AB, Common Anode Thermal-Mechanical Specifications Parameters Symbol Max Unit Junction Temperature TJ -55 to +175 °C -55 to +175 °C 4.5 °C/W 2 g Storage Temperature Tstg Maximum Thermal Resistance Junction to Case (per leg) RthJC Approximate Weight wt Case Style Test Conditions DC operation ITO-220AB Figure 1: Typical Forward Characteristics Figure 2: Typical Reverse Characteristics ºC ºC ºC ºC Figure 3: Typical Junction Capacitance ºC ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15 Schottky Barrier Rectifier MBRF20200CTR, 2x 10A, 200V, ITO-220AB, Common Anode Dimensions- ITO-220AB Symbol Millimeters Min Typ Max A 4.30 4.50 4.70 A1 1.10 1.30 1.50 A2 2.80 3.00 3.20 A3 2.50 2.70 2.90 b 0.50 0.60 0.75 b1 1.10 1.20 1.35 b2 1.50 1.60 1.75 b3 1.20 1.30 1.45 b4 1.60 1.70 1.85 c 0.55 0.60 0.75 D 14.80 15.00 15.20 E 9.96 10.16 10.36 2.55 e 5.10 e1 H1 6.50 6.70 6.90 L 12.70 13.20 13.70 2.00 L1 1.60 1.80 L2 0.80 1.00 1.20 L3 0.60 0.80 1.00 øP1 øP2 3.30 3.50 3.70 2.99 3.19 3.39 Q 2.50 2.70 2.90 θ1 θ2 θ3 θ4 θ5 5° 4° 10° 5° 5° Part Numbering and Marking System Packing Options Part Number Marking Packing Mode M.O.Q MBRF20200CTR MBRF20200CTR 50pcs / Tube 1000 Tube Specification MBRF20200CTR 6 7mm LF YYWWL MBR F 20 200 CTR LF YY WW L = Device Type = Package type = Forward Current (20A) = Reverse Voltage (200V) = Configuration = Littelfuse = Year = Week = Lot Number 530mm 32mm ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15