CL-L430-MC1N1-A P1593 1011 E

DATA SHEET
1/12
1. Scope of Application
This data sheet is applied to the LED package, model CL-L430-MC1N1-A.
2. Part code
CL - L430 - M C1 N1 - A - T
[1]
[2]
[3]
[4]
[5]
[1] Part Code
[2] Special features M : General color rendering index Ra 80 minimum.
[3] Watt class C1: 1 watt class package
[4] Chromaticity range N1: Corrirated color temperature 5000K
[5] Shipping specification T : Taping
■ Features ■
☞ External Dimensions: : 5.0×5.0×2.65
mm
: ☞ Internal Structure: : Lead
frame
: ☞ Luminous Flux:
: 124 lm @ 350 mA
☞ CCT: : 5000
K (ANSI C78.377 Compliant)
: ☞ CRI: Ra 80 min.
☞ Thermal Resistance: : 9
: C/W
☞ RoHS Compliant
Symbol
Name
CITILED
CL-L430-MC1N1-A
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1593 10/11
DATA SHEET
2/12
3. Outline drawing
Anode
Unit: mm
Tolerance : ±0.1
Anode
Cathode
Cathode
4. Performance
(1) Absolute Maximum Rating
Parameter
Symbol
Rating Value
Unit
Input Power
2.0
*1
Pi
W
IF
mA
Forward Current
600
*1
V
V
Reverse Voltage
5
R
Top
-30 ~ +85
C
Operating Temperature
Tst
-40 ~ +100
C
Storage Temperature
Solder Temperature
85
*2
Ts
C
Junction Temperature
Tj
120
C
*3
*1 Input power and forward current are the values when the LED is used within the range of
the derating curve in this data sheet.
*2 Ts : Anode solder terminal.
*3 D.C. Current : Tj = Ts + Rj-s x Pi
Symbol
Name
CITILED
CL-L430-MC1N1-A
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1593 10/11
DATA SHEET
(2) Electro-optical Characteristics
Parameter
Forward Voltage
Luminous Flux
CRI
Thermal Resistance
Symbol
VF
φv
Ra
Rj-c
Condition
IF=350mA
IF=350mA
IF=350mA
Junction-Case
3/12
Min.
2.8
93
80
-
Typ.
3.1
124
9
Max
3.4
-
Ts=25C
Unit
V
lm
C/W
Chromaticity coordinates ( Condition : IF=350mA, Ts = 25C)
5000K
Center
a
b
c
d
x
0.3447
0.3551
0.3376
0.3366
0.3515
y
0.3553
0.3760
0.3616
0.3369
0.3487
*The chromaticity center refers to ANSI C78.377:2008.
x-y chart-CIE1931
0.38
0.37
y
0.36
Color Region
(ANSI)
0.35
0.34
0.33
0.33
0.34
x
0.35
0.36
Note: The tolerance of measurement at our tester is VF+/-3% , Φv+/-10% , Chromaticity(x,y)+/-0.005 and Ra+/-1.
Symbol
Name
CITILED
CL-L430-MC1N1-A
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1593 10/11
DATA SHEET
4/12
5. Characteristics
3.5
3.0
2.5
VF [V]
・Forward Current vs. Relative Luminous Flux
Ts=25C
180%
160%
Relative Luminous Flux [a.u.]
・Forward Current vs. Forward Voltage
Ts=25C
4.0
2.0
1.5
1.0
0.5
140%
120%
100%
80%
60%
40%
20%
0%
0.0
0
0
100 200 300 400 500 600 700
100 200 300 400 500 600 700
IF [mA]
IF [mA]
・Forward Current vs. Chromaticity Coordinate
Ts=25C
0.020
∆x
0.015
∆y
0.005
△x, △y
△x, △y
0.010
・Case Temperature vs. Chromaticity Coordinate
IF=350mA
0.020
∆x
0.015
∆y
0.010
0.000
-0.005
0.005
0.000
-0.005
-0.010
-0.010
-0.015
-0.015
-0.020
-0.020
0
100 200 300 400 500 600 700
0
25
50
75
100
Ts [℃]
IF [mA]
Symbol
Name
CITILED
CL-L430-MC1N1-A
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1593 10/11
DATA SHEET
・Case Temperature vs. Forward Voltage
・Case Temperature vs. Relative Luminous Flux
IF=350mA
3.5
IF=350mA
120%
Relative Luminous Flux [a.u.]
3.0
2.5
VF [V]
5/12
2.0
1.5
1.0
0.5
100%
80%
60%
40%
20%
0.0
0%
0
25
50
75
100
0
25
・Case Temperature vs. Allowable Forward Current ・Spectrum
Relative Emission Intensity [a.u.]
700
600
IF [mA]
500
400
300
200
100
100%
80%
60%
40%
20%
0%
350
40
100
60 80
Ts [℃]
Ts=25C IF=350mA
120%
0
20
75
Ts [℃]
Ts [℃]
0
50
450
550
650
750
850
λ [nm]
100 120 140
・Directive Characteristic
-40°
-30°
-20°
-10°
100%
10°
20°
30°
40°
-50°
50°
80%
-60°
60°
60%
-70°
40%
-80°
20%
-90°
Y
70°
80°
X direction
Y direction
0%
X
90°
Symbol
Name
CITILED
CL-L430-MC1N1-A
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1593 10/11
DATA SHEET
6/12
6. Reliability
(1)Datails of the tests
Test Item
Continuous Operation Test
Low Temperature Storage Test
High Temperature Storage Test
Moisture-proof Test
Thermal Shock Test
Solder heat resistance test
Test Condition
Ta=25 C, IF=350mA× 1000 hours
-40 C × 1000 hours
100 C × 1000 hours
60 C, 90 %RH for 500 hours
-40 C × 30 minutes – 100 C × 30 minutes, 100 cycle
Recommended temperature profile (reflow soldering)× 2,
(2nd test must be started after the samples are stabilized thermally.)
(2)Judgement Criteria of Failure for Reliability Test
Measuring Item
Forward Voltage
Total Luminous Flux
Symbol
VF
φv
Measuring Condition
IF=350mA
IF=350mA
(Ta=25℃)
Judgement Criteria for Failure
>U X 1.1
<S X 0.70
U defines the upper limit of the specified characteristics. S defines the initial value.
Note : Measurement shall be taken between 2 hours and 24 hours, and the test pieces should be
return to the normal ambient conditions after the completion of each test.
Symbol
Name
CITILED
CL-L430-MC1N1-A
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1593 10/11
DATA SHEET
7/12
7. Taping Specifications
(1) Dimensions of Reel
Unit : mm
(2) Dimensions of Career tape
Unit : mm
Cathode
Anode
(3) Configration of Tape
(END) (START)
More than 40mm
Unloaded part
(4) Quantity
Mounted with CITILED
Leading part more than 400nm
400mm
2500pcs/reel
Symbol
Name
CITILED
CL-L430-MC1N1-A
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1593 10/11
DATA SHEET
8/12
8. Packing Specification
(1) Moisuture-Proof Packing
To prevent moisture absorption during transportation and strage, reels are packed in
aluminium envelpoed which contain a desicant with a humidity indicator.
Aluminum envelop
Reel
Polyester Zip fastener
Desiccant
Label
(2) Storage
To prevent moisture absorption, it is strongly recommended that reels (in bulk ore taped)
should be stored in the dry box(or the desicator) with a desiccant as the appropriate strage place.
If not, the following condition is recommended.
Temperature : 5~30C
Humidity
: 60%RH max
The devices should be mounted within 168H(7days) after unpacking.
If you store the unpacked reels, please store them in the dry box or seal them into the envelop again.
(3) Using condition
This devices contain silver plated elctrode. So, when being exposed to environment which contains
corrosive gases, the silver plating becomes tarnished.
Tarnished plating may lead to poor solderability and degradation of optical characteristics.
Please DO NOT exposed this debvice to corrosive atomosphere anytime (during storage, or after mounted).
Please take care above when designing your product.
Symbol
Name
CITILED
CL-L430-MC1N1-A
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1593 10/11
DATA SHEET
9/12
9. Precautions
1. Handling precaution
(1). Please do not place strong pressure on the silicone dome lens.
(2). Avoid any contact by a sharp metal nail or other materials with the silicone dome lens.
dome lens
(3) Pick and Place
When mounting LEDs using automated equipment, contact pressure on the silicone dome lens
should be minimized through use of such as a vacuum chuck.
Please do not apply strong diagonal force to the dome lens or fatal damage will occur.
(4). PCB handling
Bending the circuit board with soldered LEDs may cause breakage of LEDs.
Please take care to bow, twist, and warpage of fthe PCB.
2. Lighting at low current
A minimum current value of lighting of all dice is 6mA.
When a minimal current is applied, LED dice may look different in their brightness due to
the individual difference of the LED element, and it is not a failed product.
3. Handling of static electricity
These products are sensitive to static electricity charge.
Please take measure to prevent any static electricity being produced as the wearing of a wristband
or anti-static gloves when handling this product.
All devices, equipment, and machinary must be properly grounded. It is recommended that precautions
be taken against surge voltage to the equipment that mounts the LEDs.
When inspecting the final products in which LEDs were assembled, it is recommended to check
whether the assembled LEDs are damaged by static electricity or not.
It is easy to find static-damaged LEDs by a light-on test.
Symbol
Name
CITILED
CL-L430-MC1N1-A
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1593 10/11
DATA SHEET
10/12
9. Precautions (continued)
4. Designing precaution
A constant current circuit is recommended as a drive circuit.
When using two or more LED packages, connect current limiting resistor in series
on each path is recommended.
R
R
R
R
R
R
R
ex. Circuit with resistor.
Cathode
Anode
CL-L430 has small electrode at the side of package.
Please take care about shortage with conductive rubbish.
Please design a circuit that prevents any reverse voltage (excess current) from beingfig : small electrode
applied to this product instantaneously when the circuit is ON or OFF.
Please be aware that this product should not come into contact with any other parts
in assembled status.
5. Soldering
(1) Lead free soldering
1) Following soldering paste is recommended
Melting temperature : 216~220C.
Composition : Sn 3.5 Ag 0.75 Cu
T e m p e ra tu re
2) The temperature profile at the top surface of the parts is recommended as below.
4 °C/sec. Max
4°C/sec. Max
220 °C
160 ~ 180 °C
140sec
260°C Max
3sec. Max
60 ~ 70sec
Time
3) It is requested that products shuld be handled after their temperature has dropped
down to the normal room temperature.
(2) Recommended soldering pattern
Mountability and solderability need to be optimized
with actual conditions such as amount of solder, reflow
temperature applied in the process.
Symbol
Name
CITILED
CL-L430-MC1N1-A
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1593 10/11
DATA SHEET
11/12
9. Precautions (continued)
6. Heat generation
As this product is designed with consideration of the heat release property of module,
a heat release design is required to use this product effficiently.
please ensure that heat generation is not in excess of the absolute maximum rating.
Factors responsible for an increase in temperature include heat generation attributed to
ambient temperature conditions or power dissipation. Thus, drive condition should be
taken into consideration, depending on ambient temperature(Ta).
*Citizen Electoronics cannnot guarantee if usage exeeds this recommended conditions.
Please use it after sufficient verification is carried out on your own risk if necessary.
7. Eye Safety
- The International Electrical Commission (IEC) published in 2006 IEC 62471
”2006 Photobiological safety oflamps and lamp systems ” which includes LEDs within its scope.
When sorting single LEDs according to IEC 62471, most white LEDs can be classified as belonging to
either Exempt Group or Risk Group 1.
- However, Optical characteristics of LEDs such as radiant flux, spectrum and light distribution are factors
that affect the risk group determination of the LED, and especially a high-power LED,
that emits light containing blue wavelengths, may have properties equivalent to those of Risk Group 2.
- Great care should be taken when directly viewing an LED that is driven at high current,
has multiple uses as a module or when focusing the light with optical instruments,
as these actions may greatly increase the hazard to your eyes.
- It is recommended to regard the evaluation of stand-alone LED packages as a reference and to evaluate
the customer's final product.
8. The use of Class 2 power supply is assumed for this product.
9. If the product might to be used under the following conditions, the customer must evaluate
its approproateness them. This product is not designed for use under the following conditions.
in places where the product might:
- get wet due to rain
- suffer from damage caused by salt.
- be exposed to corrosive gas such as Cl, H2S, NH3, SO2, Nox and so on.
- be exposed to dust, fluid or oil.
Symbol
Name
CITILED
CL-L430-MC1N1-A
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1593 10/11
DATA SHEET
12/12
10. Precautions with regard to product use
1. This document is provided for reference purposes only so that CITIZEN ELECTRONICS'
products are used as intended. CITIZEN ELECTRONICS neither makes warranties or
representations with respect to the accuracy or completeness of the information contained
in this document nor grants any license to any intellectual property rights or any other
rights of CITIZEN ELECTRONICS or any third party with respect to the information
in this document.
2. All information included in this document such as product data, diagrams, charts,
is current as of the date this document is issued.
Such information, however, is subject to change without any prior notice.
Before purchasing or using any CITIZEN ELECTRONICS' products listed in this document,
please confirm the latest product information with a CITIZEN ELECTRONICS' sales office,
and formal specifications must be exchanged and signed by both parties prior to mass production.
3. CITIZEN ELECTRONICS has used reasonable care in compiling the information
included in this document,
but CITIZEN ELECTRONICS assumes no liability whatsoever for any damages incurred as
a result of errors or omissions in the information included in this document.
4. Absent a written signed agreement, except as provided in the relevant terms and conditions of
sale for product, and to the maximum extent allowable by law, CITIZEN ELECTRONICS
assumes no liability whatsoever, including without limitation, indirect, consequential, special,
or incidental damages or loss, including without limitation, loss of profits, loss of opportunities,
business interruption and loss of data, and disclaims any and all express or implied warranties
and conditions related to sale, use of product, or information, including warranties
or conditions of merchantability, fitness for a particular purpose, accuracy of information,
or no infringement.
5. Though CITIZEN ELECTRONICS works continually to improve products' quality and reliability,
products can malfunction or fail. Customers are responsible for complying with safety standards
and for providing adequate designs and safeguards to minimize risk and avoid situations
in which a malfunction or failure of a product could cause loss of human life,
bodily injury or damage to property, including data loss or corruption.
In addition, customers are also responsible for determining the appropriateness of
use of any information contained in this document such as application cases not only with
evaluating by their own but also by the entire system.
CITIZEN ELECTRONICS assumes no liability for customers' product design or applications.
6. Please contact CITIZEN ELECTRONICS' sales office if you have any questions regarding
the information contained in this document, or if you have any other inquiries.
CITIZEN Micro HumanTech is a registered trademark of Citizen Holding Co., Japan.
CITILED is a registered trademark of CITIZEN ELECTRONICS CO., LTD. Japan
Symbol
Name
CITILED
CL-L430-MC1N1-A
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1593 10/11