MALIML0024 S-Band ‘Drop-in’ Limiter Module • • • • • • High Reliability Designed for integrated applications Weight and space saving design High power handling Low insertion loss European Manufacture Mechanical Representation (Uncovered microwave circuit for hermetically sealed integrated) This high reliability S-band ‘Drop-in’ limiter module features a weight and space saving design. By utilising API Technologies GMIC (Glass Microwave Integrated Circuit) Technology, integration applications can benefit from both small feature size and high performance. This design has low insertion loss and high power handling capability, essential parameters for limiter applications. The same concepts can be applied to your particular integration needs. Please contact the factory for details. RF Performance Value Parameter Min. Typ. Max. Units Frequency Band 2.7 3.8 GHz Operating Temperature Top -10 +65 °C 0.5 dB 0.3 Insertion Loss 35 Isolation dB Peak Input Power (Pulsed) 100 W Output Flat Leakage (CW and Pulse) +19 dBm Spike Leakage (RF rise time >= 15ns) Recovery time, Normal Operating (to within 3db of I/L at input power test conditions) Input VSWR (Pin ≤ -10dBm) 10 nJ 500 nS 1.5:1 Ratio Output VSWR (Pin ≤ -10dBm) 1.5:1 Ratio (Applies over the frequency range @ +25°C, output and input load impedance of 50 ohms. Unless otherwise stated limits & conditions are indicated values.) Whilst every effort is made to ensure the accuracy of the information contained in this brochure, no responsibility can be accepted for any errors and/or omissions. Descriptions and specifications of products are subject to change without notice. +44 (0) 1908.574.200 email - [email protected] http://rf2m.apitech.com +1 855.294.3800 www.apitech.com