DomiLED AlInGaP DDx-xRS-I2 - Catalogue-v6

DOMINANT
Opto Technologies
Innovating Illumination
DomiLED
TM
DATA SHEET:
DomiLEDTM
AlInGaP : DDx-xRS-I2
TM
Synonymous with function and performance, the DomiLED series is
perfectly suited for a variety of cross-industrial applications due to its
small package outline, durability and superior brightness.
TM
Features:
> High brightness surface mount LED.
> 120° viewing angle.
>
>
>
>
>
Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm.
Qualified according to JEDEC moisture sensitivity Level 2.
Compatible to both IR reflow soldering.
Environmental friendly; RoHS compliance.
Compliance to AEC-Q101 Standard.
Applications:
> Automotive:
Interior applications, eg: switches, telematics, climate control
system, dashboard, etc. Exterior applications, eg: signal lighting,
Center High Mounted Stop Light (CHMSL)
> Consumer appliances: Backlighting illumination as in PDAs,
LCD TV.
> Communication: indicator and backlight in mobile phone, flash
light.
> Industrial: white goods (eg: Oven, microwave, etc.), light bar,
illuminated advertising.
© 2005 DomiLED is a trademark of DOMINANT Opto Technologies.
All rights reserved. Product specifications are subject to change without notice.
1
16/10/2015 V6.0
DOMINANT
TM
AlInGaP : DDx-xRS-I2
Opto Technologies
Innovating Illumination
Optical Characteristics at Tj=25˚C
Part Ordering
Number
Color
Luminous Intensity @ 2mA; IV (mcd)
Typ.
Min.
Max.
Viewing
Angle˚
DDS-CRS-J2L1-1-I2
Super red, 632nm
120
5.6
9.0
14.0
DDO-CRS-LM2-1-I2
Orange, 605nm
120
11.2
18.0
28.5
DDY-CRS-KL2-1-I2
Yellow, 587nm
120
7.2
11.2
18.0
DDY-CRS-LM2-1-I2
Yellow, 587nm
120
11.2
18.0
28.5
Not for new design
NOTE
1. All part number above comes in a quantity of 2000 units per reel.
2. Luminous intensity is measured with an accuracy of ± 11%.
3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel.
Electrical Characteristics at Tj=25˚C
Part Number
DDS, DDO, DDY
Vf @ If = 2mA
Typ. (V)
Max. (V)
Vr @ Ir = 10uA
Min. (V)
12
2.2
1.8
Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V.
Absolute Maximum Ratings
Maximum Value
Unit
DC forward current
20
mA
Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1)
100
mA
Reverse voltage
12
V
ESD threshold (HBM)
2
kV
125
˚C
Operating temperature
-40 … +100
˚C
Storage temperature
-40 … +100
˚C
45
mW
LED junction temperature
Power dissipation (at room temperature)
2
16/10/2015 V6.0
DOMINANT
TM
AlInGaP : DDx-xRS-I2
Opto Technologies
Innovating Illumination
Wavelength Grouping at Tj=25˚C
Color
Group
Wavelength distribution (nm)
DDS; Super-red
Full
625 - 640
DDO; Orange
Full
600 - 612
W
600 - 603
X
603 - 606
Y
606 - 609
DDY; Yellow
Z
609 - 612
Full
582 - 594
W
582 - 585
X
585 - 588
Y
588 - 591
Z
591 - 594
Dominant wavelength is measured with an accuracy of ± 1 nm.
Luminous Intensity Group at Tj=25˚C
Luminous Intensity
IV (mcd)
Brightness Group
J2
5.6...7.2
K1
7.2...9.0
K2
9.0...11.2
L1
11.2...14.0
L2
14.0...18.0
M1
18.0...22.4
M2
22.4...28.5
Luminous intensity is measured with an accuracy of ± 11%.
3
16/10/2015 V6.0
DOMINANT
TM
AlInGaP : DDx-xRS-I2
Opto Technologies
Innovating Illumination
Forward
Current
Vs
Forward
Voltage
Forward
Current
Forward
Voltage
Forward
Current
VsVs
Forward
Voltage
30
30
5
4
3
2
1
25
25
Forward Current, mA
6
Forward Current, mA
Relative Intensity; Normalized at 2mA
Relative Intensity Vs Forward Current
20
20
15
15
30
25
20
15
10
10
10
55
00
5
1.2
1.20
0
0
2
4
6
8
1.4
1.4
1.2
10
1.6
1.6
22
2.2
2.2
1.4Forward
1.6 Voltage;
1.8
2
V
Forward
Voltage;
V
Forward Current; mA
2.2
2.4
2.4
2.4
Forward Voltage; V
Forward Current Vs Ambient Temperature
25
Forward
1.8
1.8
Relative
Relative Intensity
Intensity Vs
Vs Wavelength
Wavelength
Current Vs Ambient Temperature
Relative Intensity Vs Wavelength
11
Relative Intensity
Current,
ForwardForward
Current,
mA mA
0.9
0.9
25
20
0.8
0.8
0.7
0.7 0.9
Orange
20
15
0.6
0.6 0.8
0.5
0.5 0.7
Super Red
10
15
1
0.4
0.4 0.6
Yellow
0.3
0.3 0.5
5
10
0.2
0.2 0.4
0
0.1
0.1 0.3
00
0.2
500
500
0.1
5
0
20
40
60
80
100
Ambient Temperature
0
0
20
40
60
600
600
500
100
Ambient Temperature
800
800
Wavelength;
Wavelength; nm
nm
0
80
700
700
550
600
650
700
750
800
Wavelength; nm
Radiation Pattern
30°
20°
10°
0°
1.0
40°
0.8
50°
0.6
60°
0.4
70°
0.2
80°
90°
0
4
16/10/2015 V6.0
DOMINANT
TM
AlInGaP : DDx-xRS-I2
Opto Technologies
Innovating Illumination
DomiLED • AllnGaP : DDx-xRS-I2 Package Outlines
TM
Material
Material
Lead-frame
Cu Alloy With Ag Plating
Package
High Temperature Resistant Plastic, PPA
Encapsulant
Epoxy
Soldering Leads
Sn Plating
5
16/10/2015 V6.0
DOMINANT
TM
AlInGaP : DDx-xRS-I2
Opto Technologies
Innovating Illumination
Recommended Solder Pad
6
16/10/2015 V6.0
DOMINANT
TM
AlInGaP : DDx-xRS-I2
Opto Technologies
Innovating Illumination
Taping and orientation
• Reels come in quantity of 2000 units.
• Reel diameter is 180 mm.
7
16/10/2015 V6.0
DOMINANT
TM
AlInGaP : DDx-xRS-I2
Opto Technologies
Innovating Illumination
Packaging Specification
8
16/10/2015 V6.0
DOMINANT
TM
AlInGaP : DDx-xRS-I2
Opto Technologies
Innovating Illumination
Packaging Specification
Existing BPL
Moisture sensitivity
level size - 87mm x 45mm.
As part of improvement and also in response to customers’ request; BPL f
Barcode label
changed to the following.
DOMINANT Opto Technologies
(L) Lot No : lotno
ML TEMP
2 260˚C
RoHS Compliant
(P) Part No : partno
(C) Cust No : partno
(Q) Quantity : quantity
(G) Grouping : group
(D) D/C : date code
Made in Malaysia
(S) S/N : serial no
New BPL size - 110mm x 55mm.
Additional information are now included in the label. 2D and 3D barc
Reel
implemented now
for every data field.
Label
Moisture absorbent material +
Moisture indicator
Issue No : 1
The reel, moisture absorbent material and moisture indicator are
sealed inside the moisture proof foil bag
Weight
Weight(gram)
(gram)
Average 1pc DomiLED/Multi DomiLED
1 completed bag (2000pcs)
0.034
0.034
240 ± 10
190
10
Cardboard
Box
DOMINANT TM
For DomiLED
TM
Cardboard Box
Size
Dimensions (mm)
Empty Box
Weight (kg)
Reel / Box
Super Small
325 x 225 x 190
0.38
9 reels MAX
Small
325 x 225 x 280
0.54
15 reels MAX
Medium
570 x 440 x 230
1.46
60 reels MAX
Large
570 x 440 x 460
1.92
120 reels MAX
9
16/10/2015 V6.0
DOMINANT
TM
AlInGaP : DDx-xRS-I2
Opto Technologies
Innovating Illumination
Recommended Pb-free Soldering Profile
Classification Reflow Profile (JEDEC J-STD-020C)
300
255-260˚C
10-30s
275
250
225
Temperature (˚C)
Ramp-up
3˚C/sec max.
217˚C
200
60-150s
175
150
125
Rampdown
6˚C/sec
max.
100
75
Preheat 60-180s
50
25
480s max
0
50
100
150
200
Time (sec)
10
16/10/2015 V6.0
DOMINANT
TM
Opto Technologies
AlInGaP : DDx-xRS-I2
Innovating Illumination
Revision History
Page
Subjects
Date of Modification
-
Initial Release
09 Sep 2008
2
Not for new design: DDY-CRS-KL2-1-I2
Add new partno: DDY-CRS-LM2-1-I2
27 Jul 2009
-
Update company name
31 May 2010
4
Add Graph: Relative Luminous Intensity
Vs Forward Current
08 Mar 2012
8
Error in carrier tape
22 Jun 2012
1, 9
Add Features
Update Packaging Specification
16 Oct 2015
NOTE
All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT
Opto Technologies does not assume any liability arising out of the application or use of any product described herein.
DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function
or design.
DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems
without the express written approval from the Managing Director of DOMINANT Opto Technologies.
11
16/10/2015 V6.0
DOMINANT
TM
Opto Technologies
AlInGaP : DDx-xRS-I2
Innovating Illumination
About Us
DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED
Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries
and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs
are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art
manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More
information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com.
Please contact us for more information:
DOMINANT Opto Technologies Sdn. Bhd.
Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia
Tel: (606) 283 3566 Fax: (606) 283 0566
E-mail: [email protected]
DOMINANT
Opto Technologies
Innovating Illumination
TM