DOMINANT Opto Technologies Innovating Illumination DomiLED TM DATA SHEET: DomiLEDTM AlInGaP : DRx-NJE TM Synonymous with function and performance, the DomiLED series is perfectly suited for a variety of cross-industrial applications due to its small package outline, durability and superior brightness. TM Features: > High brightness surface mount LED using thin film technology. > > > > > > > 120° viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Black coated surface with color tinted to enhance contrast. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Compliance to AEC-Q101 Standard. Applications: > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. > Display: full color display video notice board. > Industrial: white goods (eg: Oven, microwave, etc.). © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 16/10/2015 V4.0 DOMINANT TM AlInGaP : DRx-NJE Opto Technologies Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number Color Viewing Angle˚ Luminous Intensity @ IF = 20mA IV (mcd) Min. Typ. Max. DRR-NJE-T2U-1 Red, 625nm 120 355.0 450.0 715.0 DRY-NJE-UV1-1 Yellow, 587nm 120 450.0 560.0 900.0 NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 4. An optional Vf bining is also available upon request. Bining scheme is as per following table. Electrical Characteristics at Tj=25˚C Part Number DRx-NJE Vf @ If = 20mA Min. (V) 1.8 Vr @ Ir = 10uA Typ. (V) Max. (V) 2.1 2.6 Min. (V) 12 Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V. Absolute Maximum Ratings Maximum Value Unit DC forward current 50 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.10) 100 mA Reverse voltage 12 V ESD threshold (HBM) 2 kV 120 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 130 mW LED junction temperature Power dissipation (at room temperature) 2 16/10/2015 V4.0 DOMINANT TM AlInGaP : DRx-NJE Opto Technologies Innovating Illumination Wavelength Grouping at Tj=25˚C Color Group Wavelength distribution (nm) DRR; Red Full 620 - 630 DRY; Yellow Full 582 - 594 W 582 - 585 X 585 - 588 Y 588 - 591 Z 591 - 594 Dominant wavelength is measured with an accuracy of ± 1 nm. Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group T2 355.0...450.0 U1 450.0...560.0 U2 560.0...715.0 V1 715.0...900.0 Luminous intensity is measured with an accuracy of ± 11%. 3 16/10/2015 V4.0 DOMINANT TM AlInGaP : DRx-NJE Opto Technologies Innovating Illumination ForwardVoltage Current Vs Forward Voltage Forward Current Vs Forward ForwardCurrent Voltage Forward 3.5 3 2.5 2.8 2.4 3 2.5 2.3 Forward Voltage, V Forward Voltage, V RelativeIntensity; Intensity; Normalized Normalized at 20mA Relative Relative Intensity Relative Luminous Intensity VsForward Forward Current Relative Luminous Intensity Vs Current Relative Intensity Vs Forward Current 2.5 2 2 1.5 1.5 1 1 2.2 2.4 2.1 2 1.9 2 1.8 1.7 0.5 0.5 1.6 0 1.5 1.6 0 10 10 20 20 30 30 40 40 50 50 60 60 00 10 10 20 20 ForwardCurrent; Current, mA mA Forward 50 50 60 60 70 70 80 80 Allowable Forward Current Vs Duty Ratio Radiation Pattern Relative Intensity Vs Wavelength 35 60 10000 1 Allowable Forward Current, mA Forward Forward Current; Current, mA mA 40 40 ForwardCurrent, Current, mA mA Forward Maximum Current Vs Maximum Current VsTemperature Temperature Forward Current Vs Ambient Temperature 30 50 25 40 20 30 15 20 10 10 5 0 0 30 30 10 20 20 30 30 40 40 50 50 60 60 70 70 80 80 90 90 100 100 10 AmbientTemperature Temperature Ambient 30° 20° 10° 0° 1.0 0.9 40°0.8 1000 0.7 0.8 0.6 50° 100 0.5 0.6 0.4 60° 0.3 10 70°0.2 0.1 80° 01 90° 500 1 0.4 0.2 550 600 0 10 650 700 100 750 Duty Ratio, nm % Wavelength; Maximum Pulse Current Vs Duty Cycle Maximum Pulse Current; mA 1000 100 10 1 10 Duty (%); Tp<=10us 100 4 16/10/2015 V4.0 DOMINANT TM AlInGaP : DRx-NJE Opto Technologies Innovating Illumination DomiLED • AllnGap : DRx-NJE Package Outlines TM Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Epoxy Soldering Leads Sn-Sn Plating 5 16/10/2015 V4.0 DOMINANT TM AlInGaP : DRx-NJE Opto Technologies Innovating Illumination Recommended Solder Pad 7 16/10/2015 V4.0 DOMINANT TM AlInGaP : DRx-NJE Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 8 16/10/2015 V4.0 DOMINANT TM AlInGaP : DRx-NJE Opto Technologies Innovating Illumination Packaging Specification 9 16/10/2015 V4.0 DOMINANT TM Opto Technologies AlInGaP : DRx-NJE Innovating Illumination Packaging Specification Existing BPL Moisture sensitivity level size - 87mm x 45mm. As part of improvement and also in response to customers’ request; BPL f Barcode label changed to the following. DOMINANT Opto Technologies (L) Lot No : lotno ML TEMP 2 260˚C RoHS Compliant (P) Part No : partno (C) Cust No : partno (Q) Quantity : quantity (G) Grouping : group (D) D/C : date code Made in Malaysia (S) S/N : serial no New BPL size - 110mm x 55mm. Additional information are now included in the label. 2D and 3D barc Reel implemented now for every data field. Label Moisture absorbent material + Moisture indicator Issue No : 1 The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Weight Weight(gram) (gram) Average 1pc DomiLED/Multi DomiLED 1 completed bag (2000pcs) 0.034 0.034 240 ± 10 190 10 Cardboard Box DOMINANT TM For DomiLED TM Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Super Small 325 x 225 x 190 0.38 9 reels MAX Small 325 x 225 x 280 0.54 15 reels MAX Medium 570 x 440 x 230 1.46 60 reels MAX Large 570 x 440 x 460 1.92 120 reels MAX 10 16/10/2015 V4.0 DOMINANT TM AlInGaP : DRx-NJE Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 225 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 11 16/10/2015 V4.0 DOMINANT TM AlInGaP : DRx-NJE Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial Release 02 Feb 2009 - Update company name 31 May 2010 2, 4 Update DC Forward Current Update Graph: Max Current Vs Ambient Temperature Update Power Dissipation 13 Mar 2014 1, 10 Add Features Update Packaging Specification 16 Oct 2015 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes without prior notice to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 12 16/10/2015 V4.0 DOMINANT TM Opto Technologies AlInGaP : DRx-NJE Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM