DOMINANT Opto Technologies Innovating Illumination DomiLED TM DATA SHEET : DomiLEDTM InGaN : DDZB-LJG TM With the intense colors that seem to glow with energy and its significant brightness, DomiLED white LED is a highly reliable design device. Its dynamic nature makes it perfect choice for lighthing applications, office and home applications and standard industrial applications. TM Features: > > > > > > > High brightness surface mount LED. 120° viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to both IR reflow soldering. Environmental friendly; RoHS compliance. Compliance to automotive standard; AEC-Q101. Applications: > Automotive: Interior application: eg: Switches, telematics, climate control system, dashboard. Exterior application: eg: Signal Lighting, Center High Mounted Stop Light (CHMSL), Fog lamp, Rear Combination Lights (RCLs). © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 16/10/2015 V8.0 DOMINANT TM InGaN : DDZB-LJG Opto Technologies Innovating Illumination Optical Characteristics at Tj=250C Part Ordering Number Luminous Intensity @ 20mA IV (mcd) Min. Typ. Max. Viewing Angle˚ 120 DDZB-LJG-WX2-1 1125.0 1800.0 2850.0 NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Color binning is carried for all units as per the color binning table. Only one color group is allowed for each reel. Electrical Characteristics at Tj=250C Part Number Vf @ If = 20 mA Min. (V) Typ. (V) Max. (V) Vr @ Ir = 10 µA Min. (V) 2.8 3.2 3.6 5.0 DDZB-LJG Forward Voltage, Vf is measured with an accuracy of ± 0.1 V. Absolute Maximum Ratings Maximum Value Unit DC forward current 30 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.005) 100 mA 5 V ESD threshold (HBM) 2000 V LED junction temperature 125 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 110 mW 340 K/W 180 K/W Reverse voltage; Ir max = 10µA Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) 2 16/10/2015 V8.0 DOMINANT TM InGaN : DDZB-LJG Opto Technologies Innovating Illumination Characteristics Symbol Part Number Value Unit Temperature coefficient of VF (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C TCV DDZB-LJG -3.08 mV / K Temperature coefficient of IV (typ) TCIV DDZB-LJG -0.21 %/K Temperature coefficient of Cx (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C TCCx DDZB-LJG -0.00013 Temperature coefficient of Cy (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C TCCy DDZB-LJG -0.00041 IF = 20mA; 0 ˚C <= T <= 100 ˚C 3 16/10/2015 V8.0 DOMINANT DOMINANT TM TM OptoTechnologies Technologies Opto InGaN : DDZB-LJG InGaN : DSZB-LSG InnovatingIllumination Illumination Innovating ColorGrouping Grouping Color Color Structure Color Bin Bin Structure 0.36 0.34 0.32 8L 7L 0.30 5L 0.26 4L 0.24 3L 7K 6K 6L 0.28 5K 8J 7J 6J 5J 4K 3K 8K 4J 3J 0.22 0.20 0.16 0.18 0.20 0.22 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. Chromaticity coordinate groups are measured with an accuracy of ± 0.01. 1 Bin Bin 3J 3J 3K 3K 3L 3L 4J 4J 4K 4K 4L 4L 5J 5J 5K 5K 5L 5L 6J 6J 6K 6K 6L 6L 1 1 0.1862 2 2 0.1823 3 0.1881 0.1862 0.2437 0.2437 0.1774 0.1774 0.2447 0.1823 0.2280 0.2280 0.1735 0.1735 0.2289 0.1881 0.2273 0.2273 0.1823 0.1823 0.2280 0.2447 0.1716 0.2289 0.1676 0.2280 0.1735 0.2437 0.1774 0.1716 0.2454 0.1676 0.2296 0.1735 0.2289 0.1774 0.2447 0.2454 0.1902 0.2296 0.1862 0.2289 0.1921 0.2447 0.1960 0.1902 0.2595 0.1862 0.2437 0.1921 0.2431 0.1960 0.2588 Cy Cx Cx Cy 0.2595 0.1814 0.2437 0.1775 0.2431 0.1862 0.2588 0.1902 0.1814 0.2605 0.1775 0.2447 0.1862 0.2437 0.1902 0.2595 Cy Cx Cx Cy 0.2605 0.1756 0.2447 0.1716 0.2437 0.1775 0.2595 0.1814 0.1756 0.2611 0.1716 0.2454 0.1775 0.2447 0.1814 0.2605 Cy Cx Cx Cy 0.2611 0.1941 0.2454 0.1902 0.2447 0.1960 0.2605 0.2000 0.1941 0.2753 0.1902 0.2595 0.1960 0.2588 0.2000 0.2746 Cx Cy 0.2753 0.1853 0.2595 0.1814 0.2588 0.1902 0.2746 0.1941 Cy Cx 0.2762 0.1853 0.2605 0.1814 0.2595 0.1902 0.2753 0.1941 Cx Cy Cy Cx 0.1795 0.2762 0.1756 0.2605 0.1814 0.2595 0.1853 0.2753 0.2769 0.1795 0.2611 0.1756 0.2605 0.1814 0.2762 0.1853 Cx Cy Cy Cx 0.1980 0.2769 0.1941 0.2611 0.2000 0.2605 0.2039 0.2762 0.2910 0.1980 0.2753 0.1941 0.2746 0.2000 0.2904 0.2039 Cx Cy Cy Cx 0.1893 0.2910 0.1853 0.2753 0.1941 0.2746 0.1980 0.2904 0.2920 0.1893 0.2762 0.1853 0.2753 0.1941 0.2910 0.1980 Cx Cy Cy Cx 0.1830 0.2920 0.1795 0.2762 0.1853 0.2753 0.1893 0.2910 0.2930 0.1830 0.2769 0.1795 0.2762 0.1853 0.2920 0.1893 Cy 0.2930 0.2769 0.2762 0.2920 Cx Cx Cy Cy Cx Cx Cy Cy Cx Cx Cy Cy Cx Cx Cy 4 3 4 4 0.1921 0.1921 0.2431 0.2431 0.1862 0.1862 0.2437 16/10/2015 V8.0 3 30/08/2013 V2.0 DOMINANT TM InGaN : DDZB-LJG Opto Technologies Innovating Illumination 1 1 2 Cx 0.2020 0.1980 0.2039 0.2078 Cy 0.3070 0.2910 0.2904 0.3060 Cx 0.1930 0.1893 0.1980 0.2020 Cy 0.3080 0.2920 0.2910 0.3070 Cx 0.1870 0.1830 0.1893 0.1930 Cy 0.3080 0.2930 0.2920 0.3080 Cx 0.2059 0.2020 0.2078 0.2118 Cy 0.3225 0.3068 0.3061 0.3219 Cx 0.1970 0.1930 0.2020 0.2060 Cy 0.3240 0.3080 0.3070 0.3230 Cx 0.1910 0.1870 0.1930 0.1970 Cy 0.3240 0.3080 0.3080 0.3240 Bin 7J 7K 7L 8J 8K 8L 3 4 Dominant color coordinate is measured with an accuracy of ± 0.01. 5 16/10/2015 V8.0 DOMINANT TM Opto Technologies InGaN : DDZB-LJG Innovating Illumination Color Grouping Color Bin Structure 0.23 0.22 6R 0.21 6S 6T 0.20 5R 0.19 5S 5T 0.18 4R 0.17 4S 4T 0.16 0.15 0.17 0.18 0.19 0.20 0.21 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. 1 1 2 Cx 0.1744 0.1789 0.1841 0.1798 Cy 0.1632 0.1617 0.1813 0.1827 Cx 0.1789 0.1859 0.1909 0.1841 Cy 0.1617 0.1595 0.1791 0.1813 Cx 0.1859 0.1902 0.1950 0.1909 Cy 0.1595 0.1581 0.1778 0.1791 Cx 0.1798 0.1841 0.1893 0.1852 Cy 0.1827 0.1813 0.2008 0.2021 Cx 0.1841 0.1909 0.1958 0.1893 Cy 0.1813 0.1791 0.1988 0.2008 Cx 0.1909 0.1950 0.1998 0.1958 Cy 0.1791 0.1778 0.1975 0.1988 Cx 0.1852 0.1893 0.1945 0.1906 Cy 0.2021 0.2008 0.2204 0.2216 Cx 0.1893 0.1958 0.2007 0.1945 Cy 0.2008 0.1988 0.2184 0.2204 Cx 0.1958 0.1998 0.2046 0.2007 Cy 0.1988 0.1975 0.2172 0.2184 Bin 4R 4S 4T 5R 5S 5T 6R 6S 6T 3 4 Dominant color coordinate is measured with an accuracy of ± 0.01. 6 16/10/2015 V8.0 DOMINANT TM InGaN : DDZB-LJG Opto Technologies Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group W1 1125.0 ... 1400.0 W2 1400.0 ... 1800.0 X1 1800.0 ... 2240.0 X2 2240.0 ... 2850.0 Luminous intensity is measured with an accuracy of ± 11%. 7 16/10/2015 V8.0 DOMINANT TM InGaN : DDZB-LJG Opto Technologies fin ar st itu y te a D al of fe r ra ft Innovating Illumination 13th June 2014 Date : Measurement condition 25 <65% °C RH es Temperature : Humidity : Data Unit 1 IF Unit 2 0.1842 0.2722 -0.0136 1.0 0.1863 0.2744 -0.0115 1.5 0.1874 0.2756 -0.0104 2.0 0.1885 0.2768 3.0 0.1899 4.0 CX CY -0.0164 0.1850 -0.0142 Unit 3 Average Delta CX Delta CY CX CY Delta CX Delta CY Delta CX Delta CY 0.2678 -0.0126 -0.0154 0.1846 0.2733 -0.0113 -0.0135 -0.0125 -0.0151 0.1865 0.2695 -0.0111 -0.0137 0.1863 0.2747 -0.0096 -0.0121 -0.0107 -0.0133 -0.0130 0.1879 -0.0093 -0.0118 0.1884 0.2784 -0.0079 -0.0102 0.1910 0.2802 -0.0068 -0.0084 5.0 0.1920 0.2813 -0.0058 -0.0073 10.0 0.1949 0.2850 -0.0029 -0.0036 15.0 0.1966 0.2871 -0.0012 20.0 0.1978 0.2886 25.0 30.0 0.1984 0.1991 0.2893 0.2903 ifi ca 0.5 Delta CY 0.2713 -0.0097 -0.0119 0.1869 0.2762 -0.0090 -0.0106 -0.0097 -0.0118 0.2717 -0.0092 -0.0115 0.1879 0.2771 -0.0080 -0.0097 -0.0088 -0.0110 0.1899 0.2736 -0.0077 -0.0096 0.1891 0.2790 -0.0068 -0.0078 -0.0075 -0.0092 0.1909 0.2749 -0.0067 -0.0083 0.1898 0.2798 -0.0061 -0.0070 -0.0065 -0.0079 0.1917 0.2759 -0.0059 -0.0073 0.1907 0.2810 -0.0052 -0.0058 -0.0056 -0.0068 0.1946 0.2794 -0.0030 -0.0038 0.1932 0.2839 -0.0027 -0.0029 -0.0029 -0.0034 -0.0015 0.1965 0.2817 -0.0011 -0.0015 0.1949 0.2856 -0.0010 -0.0012 -0.0011 -0.0014 0.0000 0.0000 0.1976 0.2832 0.0000 0.0000 0.1959 0.2868 0.0000 0.0000 0.0000 0.0000 0.0006 0.0013 0.0007 0.0017 0.1985 0.1992 0.2845 0.2855 0.0009 0.0016 0.0013 0.0023 0.1967 0.1972 0.2876 0.2884 0.0008 0.0013 0.0008 0.0016 0.0008 0.0014 0.0009 0.0019 is sp Pr ec Delta CX el CY (mA) Th CX tio n im Instrument Systems CAS140B Keithley 2400 do Equipment no in - tc on Measurement Report Allowable Forward Current Vs Duty Ratio hart Chromaticity Chromaticity Coordinate Coordinate Shift Shift ( Tj=25° C ) 0.04 0.03 Delta CX 0.02 Delta CY ȴCX ,ȴ CY ΔCX , Δ CY 0.02 0.01 0.01 0 -0.01 -0.01 -0.02 -0.03 Cy -0.02 -0.04 -0.05 DDZBͲLJG Cx 0.00 0.0 -0.03 5.0 0 2 10.0 4 15.0 6 8 20.0 25.0 10 12 14 Forward current (mA) 30.0 16 18 Cx Cy 1000 Allowable Forward Current ( mA ) Variables 0.03 Allowable Forward Current ( mA ) 0.05 20 Allowable( Forward Ta=25 Deg C, Current tp10uS ) Vs Duty Ratio ( Ta=25 Deg C, tp≤10uS ) 100 10 0.1 1 10 100 Duty Ratio, Ratio, % % Duty Forward current (mA) DDZB-LJG 8 16/10/2015 V8.0 DOMINANT TM InGaN : DDZB-LJG Opto Technologies Innovating Illumination Radiation Pattern 30° 20° 10° 0° 1.0 40° 0.8 50° 0.6 60° 0.4 70° 0.2 80° 90° 0 9 16/10/2015 V8.0 DOMINANT TM InGaN : DDZB-LJG Opto Technologies Innovating Illumination DomiLED • InGaN : DDZB-LJG Package Outlines TM Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Silicone Resin Soldering Leads Sn-Sn Plating 10 16/10/2015 V8.0 DOMINANT TM InGaN : DDZB-LJG Opto Technologies Innovating Illumination Recommended Solder Pad 11 16/10/2015 V8.0 DOMINANT TM InGaN : DDZB-LJG Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 12 16/10/2015 V8.0 DOMINANT TM InGaN : DDZB-LJG Opto Technologies Innovating Illumination Packaging Specification 13 16/10/2015 V8.0 DOMINANT TM InGaN : DDZB-LJG Opto Technologies Innovating Illumination Packaging Specification Existing BPL Moisture sensitivity level size - 87mm x 45mm. As part of improvement and also in response to customers’ request; BPL f Barcode label changed to the following. DOMINANT Opto Technologies (L) Lot No : lotno ML TEMP 2 260˚C RoHS Compliant (P) Part No : partno (C) Cust No : partno (Q) Quantity : quantity (G) Grouping : group (D) D/C : date code Made in Malaysia (S) S/N : serial no New BPL size - 110mm x 55mm. Additional information are now included in the label. 2D and 3D barc Reel implemented now for every data field. Label Moisture absorbent material + Moisture indicator Issue No : 1 The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Weight Weight(gram) (gram) Average 1pc DomiLED/Multi DomiLED 1 completed bag (2000pcs) 0.034 0.034 240 ± 10 190 10 Cardboard Box DOMINANT TM For DomiLED TM Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Super Small 325 x 225 x 190 0.38 9 reels MAX Small 325 x 225 x 280 0.54 15 reels MAX Medium 570 x 440 x 230 1.46 60 reels MAX Large 570 x 440 x 460 1.92 120 reels MAX 14 16/10/2015 V8.0 DOMINANT TM InGaN : DDZB-LJG Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 225 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 15 16/10/2015 V8.0 DOMINANT TM InGaN : DDZB-LJG Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial release 09 Jul 2012 1 Update Application 09 Oct 2012 2 Add Thermal Resistance 22 Apr 2013 1, 3 Update Product Photo Add Characteristic 12 Jun 2013 6 Add New Color Bin Structure 06 Mar 2014 8 Add Graph: Chromaticity Coordinate Shift Add Graph: Allowable Forward Current Vs Duty Ratio 04 Aug 2014 10 Typo error in material list 25 Aug 2014 1, 14 Add Features Update Packaging Specification 16 Oct 2015 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 16 16/10/2015 V8.0 DOMINANT TM Opto Technologies InGaN : DDZB-LJG Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia. Tel: +606 283 3566 Fax: +606 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM