Download this Data sheet

44 MHz SAW Filter
4.93 MHz Bandwidth
Part Number: SF0044BA01979T
DESCRIPTION
•
•
•
44 MHz SAW bandpass filter for VSB System M – IF applications.
35.1 x 20.6 mm DIP package.
RoHS compliant.
TYPICAL PERFORMANCE
Horizontal:
Vertical from Top:
Frequency :
Relative Magnitude :
Relative magnitude :
Group Delay Deviation :
2
10
1
50
MHz/div
dB/div
dB/div
ns/div
Spectrum Microwave
400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401
www.SpectrumMicrowave.com
DSSF0044BA01979T Rev A 4-Feb-2010
ECN 36650 Page 1 of 3
44 MHz SAW Filter
4.93 MHz Bandwidth
Part Number: SF0044BA01979T
SPECIFICATION
Parameter
Min
Typ
Max
Units
1
Center Frequency (Fo, nominal)
44
MHz
Insertion Loss( average passband level)
27
29
dB
2
Passband Ripple
0.6
0.8
dB p-p
Attenuation at 41.57 MHz
1.5
2
dB
Attenuation at 46.5 MHz
0.5
2
dB
Group Delay response at:
45.75 MHz ( reference)
0
ns
41.57 MHz
-446
-346
-246
ns
41.75 MHz
-343
-293
-243
ns
41.85 MHz
-299
-264
-229
ns
42.17 MHz
-205
-170
-135
ns
42.75 MHz
-45
-10
25
ns
43.0 to 46.5 MHz
-35
0
35
ns
Rejection (20 to 40.15 MHz)
50
55
dB
Rejection ( 40.15 to 41.10 MHz)
45
48
dB
Rejection ( 41.10 to 41.25 MHz)
30
40
dB
Rejection ( 47.0 to 47.6 MHz)
45
50
dB
Rejection ( 47.6 to 60 MHz)
50
55
dB
Time domain spurious ( 3.5 -13 us After main signal)
50
57
dB
Delay at Fo
4.4
us
Ambient Temperature (Tref)
60
ºC
Source/Load Impedance
50
Ω
Notes:
1. Average of lower & upper 3 dB frequencies.
2. Measured over 41.75 to 46.45 MHz.
3. Typical change of filter frequency response with temperature is ∆f = (T-Tref)*Tc*Fc, in ppm.
MAXIMUM RATINGS
Parameter
Storage Temperature Range
Temperature Coefficient of Frequency (Tc) 3
Input Power Level
Min
Typ
Max
Units
-40
-
60
-94
0
85
10
˚C
ppm/˚C
dBm
MATCHING CIRCUIT
Output
50 Ω
Single-ended
Input
50 Ω
Single-ended
GND
Note: External matching components are not required.
Spectrum Microwave
400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401
www.SpectrumMicrowave.com
DSSF0044BA01979T Rev A 4-Feb-2010
ECN 36650 Page 2 of 3
44 MHz SAW Filter
4.93 MHz Bandwidth
Part Number: SF0044BA01979T
PACKAGE OUTLINE
Units: mm
Tolerances are ±0.15 mm except
for the overall length and width,
which are nominal values.
Pin Configuration:
Input:
3
Input return:
2
Output:
15
Output return:
14
Ground:
All other pins
ISO 9001
Registered
All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice.
© 2010 All rights reserved.
Spectrum Microwave
400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401
www.SpectrumMicrowave.com
DSSF0044BA01979T Rev A 4-Feb-2010
ECN 36650 Page 3 of 3