696.42 MHz Delay Line 1.4 MHz Bandwidth Part Number SD0696BA03217S DESCRIPTION • • • 696.42 MHz SAW delay line with 1.4 MHz bandwidth. 5 x 7 mm ceramic LCC. RoHS compliant. TYPICAL PERFORMANCE Amp 10 dB/div Amp 1 dB/div Phase 10 deg/div Delay 100 ns/div Center = 696.42 MHz, 2 MHz/div (25 kHz incr) S11 (686.42-706.42 MHz) S22 (686.42-706.42 MHz) Spectrum Microwave 400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401 www.SpectrumMicrowave.com SD0696BA03217S Rev A ECN 36650 24-Mar-2010 Page 1 of 3 696.42 MHz Delay Line 1.4 MHz Bandwidth Part Number SD0696BA03217S SPECIFICATION Parameter Center Frequency (Fc, at 10dB points) 2,3 Insertion Loss 3 dB Bandwidth 10 dB Bandwidth Phase Linearity 2 Phase Slope (in 3 dB BW) Insertion Phase 1, 2 Device Delay Turn Over Temperature (Tc) Source and Load Impedance Ambient Temperature Notes: Min 696.35 1.4 - Typ 696.42 6.9 1.51 2.71 2.5 -0.16 0 570 46 50 23 Max 696.49 9 10 - Units MHz dB MHz MHz deg p-p deg/kHz deg ns °C Ω °C 1. Measured at 696.42 MHz in a tuned reference test fixture. 2. Specifications apply at an ambient temperature of 23C +/- 5C. 3. Frequency versus temperature will be according to the following: dFc/Fc = -0.032 ppm * (T-Tc) 2 where (dFc/Fc) = Change in center frequency (in ppm) and T = temperature (in degrees C). Tc = the turnover temperature. MAXIMUM RATINGS Parameter Storage Temperature Range Operating Temperature Range Input Power Level Min Max -40 -30 - 125 100 +13 Units ˚C ˚C dBm MATCHING CIRCUIT 12 6 Input 50 Ω Single-ended Output 50 Ω Single-ended All others GND GND Typical component values: Ls1 Cp1 = = 15 8 nH pF Ls2 Cp2 = = 12 7 nH pF Notes: 1. Recommend use of 2% tolerance matching components. Typical inductor Q=40. 2. Component values are for reference only and may change depending on board layout. Spectrum Microwave 400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401 www.SpectrumMicrowave.com SD0696BA03217S Rev A ECN 36650 24-Mar-2010 Page 2 of 3 696.42 MHz Delay Line 1.4 MHz Bandwidth Part Number SD0696BA03217S PACKAGE OUTLINE SUGGESTED FOOTPRINT Units: mm Tolerances are ±0.15 mm except for the overall length and width, which are nominal values. Pad Configuration: Input: 12 Input return: 10 Output: 6 Output return: 4 Ground: All other pads Package Material: Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 1 µm min, over a 1.3-8.9 µm Ni plating MARKING Model Number Serial Number (Optional) ESD/Pad 1 indicator and Date Code (YY=year, DDD=day) SMI BA03217S XXXXX ∆ YYDDD ISO 9001 Registered All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice. © 2010 All rights reserved. Spectrum Microwave 400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401 www.SpectrumMicrowave.com SD0696BA03217S Rev A ECN 36650 24-Mar-2010 Page 3 of 3