Standard IDC 18-24 AWG: WTB INTERCONNECT 00-9176 The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from 14 AWG to 28 AWG. This industry proven contact system has been tested to automotive levels of shock, vibration, and temperature cycling to prove their reliability and robustness. The simplicity of inserting a wire into the connector with a small tool allows a wide range of devices to be connected to the PCB without soldering. In SSL applications specifically, these connectors are used to bring power and signal onto the PCB or are used to daisy chain multiple boards together in a long string. While the IDC contact provides a gas-tight connection to conductor of the wire, the housing has been designed to grab the insulation of the wire to provide a positive strain relief even in the harshest conditions. In case of repair, the wires can be removed and replace up to three times. The 9176 series accepts 18 AWG to 24 AWG wires with an insulation diameter ranging from 1.1mm to 2.1mm. These dual contact connectors support a 10 amp current rating with two large SMT solder tails per wire to provide maximum stability on the PCB. Available in 1p-3p configuration, these connectors can be end stackable for higher pin counts. The 9176 series also comes with optional locking strain relief caps that act as the termination tool for severe vibration applications. APPLICATIONS FEATURES AND BENEFITS • Connecting discrete wire components directly to the PCB • Bringing power and signals onto a PCB • Daisy chaining PCB’s together to create a continuous string of boards • Application Notes: refer to 201-01-124 • IDC contact provides a gas-tight connection to the PCB for long term reliability • Connector housing captures the wire insulation for positive strain relief • Tested to automotive levels on shock, vibration and temperature cycling for reliability • Low and high volume assembly tools to match production volumes • Reduced total applied cost versus solder or crimp processes • Optional thru and end caps lock in place to provide maximum strain relief • High temperature insulator capable to 260ºC reflow soldering processes ELECTRICAL ENVIRONMENTAL MECHANICAL • Current Rating: 10 Amp / Contact • Voltage Rating: 300 VAC • Operating Temperature: -40ºC to +125ºC • • • • Insulator Material: Nylon 46: UL94V0 Contact Material: Phosphor Bronze Plating: Tin over Nickel Durability: 3 Cycles HOW TO ORDER 00 9176 00X 0XX X 06 Prefix Series Number of Ways Wire Gauge Size Insulator Color Plating Option 06 = Pure Tin all over No of Code Ways 001 1 002 2 003 3 Details Page 3 Page 4 Page 5 Code 001 011 022 032 Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7 18 Gauge Ø 1.6-2.1 021 Stranded 20 Gauge Ø 1.6-2.1 021 Solid or Stranded 22 Gauge Ø 1.1-1.6 016 Solid or Stranded 24 Gauge Ø 1.1-1.6 016 Solid or Stranded 9 = UL White 8 = UL Black Special Order Certification: UL File #E90723 1 Standard IDC 18-24 AWG: WTB 00-9176 INTERCONNECT CONNECTOR/TOOLING PART NUMBER MATRIX AWG 18 18 18 18 18 18 20 20 20 20 20 20 22 22 22 22 22 22 24 24 24 24 24 24 24 2 SERIES 9176 IDC HAND INSERTION TOOLING* ACCESSORY CAPS Wire Plastic Metal Mass Positions Color Part Number Through Wire Wire Stop Insulation (medium volume) (high volume) Termination Ø 1.6 - 2.1 1p Black 009176001001806 069176701601000 069176701701000 N/A 609176001021000 609176001021099 Ø 1.6 - 2.1 1p White 009176001001906 069176701601000 069176701701000 N/A 609176001021100 609176001021199 Ø 1.6 - 2.1 2p Black 009176002001806 069176701601000 069176701701000 069176701701002 609176002021000 609176002021099 Ø 1.6 - 2.1 2p White 009176002001906 069176701601000 069176701701000 069176701701002 609176002021100 609176002021199 Ø 1.6 - 2.1 3p Black 009176003001806 069176701601000 069176701701000 069176701701003 609176003021000 609176003021099 Ø 1.6 - 2.1 3p White 009176003001906 069176701601000 069176701701000 069176701701003 609176003021100 609176003021199 Ø 1.6 - 2.1 1p Black 009176001011806 069176701601000 069176701701000 N/A 609176001021000 609176001021099 Ø 1.6 - 2.1 1p White 009176001011906 069176701601000 069176701701000 N/A 609176001021100 609176001021199 Ø 1.6 - 2.1 2p Black 009176002011806 069176701601000 069176701701000 069176701701002 609176002021000 609176002021099 Ø 1.6 - 2.1 2p White 009176002011906 069176701601000 069176701701000 069176701701002 609176002021100 609176002021199 Ø 1.6 - 2.1 3p Black 009176003011806 069176701601000 069176701701000 069176701701003 609176003021000 609176003021099 Ø 1.6 - 2.1 3p White 009176003011906 069176701601000 069176701701000 069176701701003 609176003021100 609176003021199 Ø 1.1 - 1.6 1p Black 009176001022806 069176701602000 069176701702000 N/A 609176001016000 609176001016099 Ø 1.1 - 1.6 1p White 009176001022906 069176701602000 069176701702000 N/A 609176001016100 609176001016199 Ø 1.1 - 1.6 2p Black 009176002022806 069176701602000 069176701702000 069176701702002 609176002016000 609176002016099 Ø 1.1 - 1.6 2p White 009176002022906 069176701602000 069176701702000 069176701702002 609176002016100 609176002016199 Ø 1.1 - 1.6 3p Black 009176003022806 069176701602000 069176701702000 069176701702003 609176003016000 609176003016099 Ø 1.1 - 1.6 3p White 009176003022906 069176701602000 069176701702000 069176701702003 609176003016100 609176003016199 Ø 1.1 - 1.6 1p White 009176001032106 069176701602000 069176701702000 N/A 609176001016100 609176001016199 Ø 1.1 - 1.6 1p Black 009176001032806 069176701602000 069176701702000 N/A 609176001016000 609176001016099 Ø 1.1 - 1.6 1p White 009176001032906 069176701602000 069176701702000 N/A 609176001016100 609176001016199 Ø 1.1 - 1.6 2p Black 009176002032806 069176701602000 069176701702000 069176701702002 609176002016000 609176002016099 Ø 1.1 - 1.6 2p White 009176002032906 069176701602000 069176701702000 069176701702002 609176002016100 609176002016199 Ø 1.1 - 1.6 3p Black 009176003032806 069176701602000 069176701702000 069176701702003 609176003016000 609176003016099 Ø 1.1 - 1.6 3p White 009176003032906 069176701602000 069176701702000 069176701702003 609176003016100 609176003016199 * Hand Insertion Tooling - Universal Hand Tool 067000773001000; Consult Application Notes 201-01-124 Standard IDC 18-24 AWG: WTB INTERCONNECT 00-9176 18-24 AWG 1 WAY IDC CONNECTOR NOTES: 1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION. 2. CONTACT MATERIAL: PHOSPHOR BRONZE. INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46. COLOR REFER TO PAGE 1. 3. CONTACTS DESIGNED TO ACCEPT BETWEEN 20AWG AND 24AWG SOLID AND STRANDED WIRES. 18AWG WILL ONLY ACCEPT STRANDED WIRES, SEE TABLE. 4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED. 5. FOR FULL PRODUCT SPECIFICATION ON STANDARD CONNECTORS REFER TO ELCO SPEC 201-01-106 6. APPLICATION NOTES 201-01-124. 7. FOR PCB SPACE RESTRICTED BY WIRE ASSEMBLY TOOLING REFER TO PAGE 6. 8. FOR HAND WIRE ASSEMBLY TOOLING REFER TO PAGE 8. 9. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA). 10. ALL DIMENSIONS ±0.20 TOLERANCE SPECIFIED. Code 001 011 022 032 Accepted Wire Gauge 18AWG Stranded 20AWG Solid and Stranded 22AWG Solid and Stranded 24AWG Solid and Stranded A 0.72 0.60 0.47 0.37 Wire Insulation Ø 1.6-2.1 Ø 1.6-2.1 Ø 1.1-1.6 Ø 1.1-1.6 B 2.1 2.1 1.6 1.6 SMT PCB LAYOUT PURE TIN PADS PACKING DETAILS REEL QTY LEADER TRAILER 1000 480MM 120MM 3 Standard IDC 18-24 AWG: WTB INTERCONNECT 00-9176 18-24 AWG 2 WAY IDC CONNECTOR NOTES: 1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION. 2. CONTACT MATERIAL: PHOSPHOR BRONZE. INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46. COLOR REFER TO PAGE 1. 3. CONTACTS DESIGNED TO ACCEPT BETWEEN 20AWG AND 24AWG SOLID AND STRANDED WIRES. 18AWG WILL ONLY ACCEPT STRANDED WIRES, SEE TABLE. 4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED. 5. FOR FULL PRODUCT SPECIFICATION ON STANDARD CONNECTORS REFER TO ELCO SPEC 201-01-106. UL COMPONENTS REFER TO ELCO SPECIFICATION 201-01-106UL. 6. APPLICATION NOTES 201-01-124. 7. FOR PCB SPACE RESTRICTED BY WIRE ASSEMBLY TOOLING REFER TO PAGE 6. 8. FOR HAND WIRE ASSEMBLY TOOLING REFER TO PAGE 8. 9. FOR PRESS WIRE ASSEMBLY TOOLING REFER TO PAGE 9 10. FOR ACCESSORY CAPS REFER TO PAGE 6 AND 7. 10. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA). 11. ALL DIMENSIONS ±0.20 TOLERANCE SPECIFIED. Code 001 011 022 032 Accepted Wire Gauge 18AWG Stranded 20AWG Solid and Stranded 22AWG Solid and Stranded 24AWG Solid and Stranded A 0.72 0.60 0.47 0.37 Wire Insulation Ø 1.6-2.1 Ø 1.6-2.1 Ø 1.1-1.6 Ø 1.1-1.6 SMT PCB LAYOUT PURE TIN PADS PACKING DETAILS REEL QTY LEADER TRAILER 4 1000 480MM 120MM B 2.1 2.1 1.6 1.6 Standard IDC 18-24 AWG: WTB INTERCONNECT 00-9176 18-24 AWG 3 WAY IDC CONNECTOR NOTES: 1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION. 2. CONTACT MATERIAL: PHOSPHOR BRONZE. INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46. COLOR REFER TO PAGE 1. 3. CONTACTS DESIGNED TO ACCEPT BETWEEN 20AWG AND 24AWG SOLID AND STRANDED WIRES. 18AWG WILL ONLY ACCEPT STRANDED WIRES, SEE TABLE. 4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED. 5. FOR FULL PRODUCT SPECIFICATION ON STANDARD CONNECTORS REFER TO ELCO SPEC 201-01-106. UL COMPONENTS REFER TO ELCO SPECIFICATION 201-01-106UL. 6. APPLICATION NOTES 201-01-124. 7. FOR PCB SPACE RESTRICTED BY WIRE ASSEMBLY TOOLING REFER TO PAGE 8. 8. FOR HAND WIRE ASSEMBLY TOOLING REFER TO PAGE 8. 9. FOR PRESS WIRE ASSEMBLY TOOLING REFER TO PAGE 9 10. FOR ACCESSORY CAPS REFER TO PAGE 6 AND 7. 10. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA). 11. ALL DIMENSIONS ±0.20 TOLERANCE SPECIFIED. Code 001 011 022 032 Accepted Wire Gauge 18AWG Stranded 20AWG Solid and Stranded 22AWG Solid and Stranded 24AWG Solid and Stranded A 0.72 0.60 0.47 0.37 Wire Insulation Ø 1.6-2.1 Ø 1.6-2.1 Ø 1.1-1.6 Ø 1.1-1.6 B 2.1 2.1 1.6 1.6 SMT PCB LAYOUT PURE TIN PADS PACKING DETAILS REEL QTY LEADER TRAILER 1000 480MM 120MM 5 Standard IDC 18-24 AWG: WTB INTERCONNECT 00-9176 60-9176-00X-0XX-X00 ACCESSORY CAP – THROUGH WIRE ASSEMBLED CONNECTOR NOTES: 1. CAP FOR IDC WIRE TO BOARD CONNECTION, 1, 2 AND 3 WAY, THROUGH WIRE. 2. FOR USE WITH STANDARD 9176 IDC CONNECTORS, SEE PAGE 2 FOR THE CORRECT PART CODE TO MATCH WIRE. 3. CAP MATERIAL: GLASS FILLED NYLON 46, FOR COLORS SEE TABLE BELOW. 4. DIMENSIONS A, B AND TEXT, SEE TABLE BELOW. 5. CAPS DESIGNED TO ACCOMMODATE WIRE INSULATION DIAMETERS 1.1MM TO 1.6MM AND 1.6MM TO 2.1MM. 6. ALL DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS. 7. PACKED IN BAGS, 1000 PIECES PER BAG. 8. ONE WAY CAP ASSEMBLY AID, REFER TO PAGE 10. 9. ALL DIMENSIONS ±0.20 TOLERANCE SPECIFIED. Code 016 021 6 Slot A 1.00 1.50 Diameter B 1.60 2.10 Text Ø1.6 Ø2.1 Color Black White X00 000 100 Standard IDC 18-24 AWG: WTB INTERCONNECT 00-9176 60-9176-00X-0XX-X99 ACCESSORY CAP – WIRE STOP ASSEMBLED CONNECTOR NOTES: 1. CAP FOR IDC WIRE TO BOARD CONNECTION, 1, 2 AND 3 WAY, WIRE STOP. 2. FOR USE WITH STANDARD 9176 IDC CONNECTORS, SEE PAGE 2 FOR THE CORRECT PART CODE TO MATCH WIRE. 3. CAP MATERIAL: GLASS FILLED NYLON 46, FOR COLORS SEE TABLE BELOW. 4. DIMENSIONS A, B AND TEXT, SEE TABLE BELOW. 5. CAPS DESIGNED TO ACCOMMODATE WIRE INSULATION DIAMETERS 1.1MM TO 1.6MM AND 1.6MM TO 2.1MM. 6. ALL DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS. 7. PACKED IN BAGS, 1000 PIECES PER BAG. 8. ONE WAY CAP ASSEMBLY AID, REFER TO PAGE 10. 9. ALL DIMENSIONS ±0.20 TOLERANCE SPECIFIED. Code 016 021 Slot A 1.00 1.50 Diameter B 1.60 2.10 Text Ø1.6 Ø2.1 Color Black White X00 000 100 7 Standard IDC 18-24 AWG: WTB INTERCONNECT 00-9176 HAND INSERTION TOOLING FOR SINGLE 18/24 GAUGE WIRE UNIVERSAL HANDLE HIGH PRODUCTION Metal Max Insulation Dia Ø2.10 Ø1.60 Details Tool Part Number 6.35 A/F HEX BIT HOLDER 06 7000 7730 01 000 MEDIUM PRODUCTION Metal/Plastic Tool Part Number 06 9176 7017 01 000 06 9176 7017 02 000 Max Insulation Dia Ø2.10 Ø1.60 Tool Part Number 06 9176 7016 01 000 06 9176 7016 02 000 CLEARANCE AREA ON PCB FOR HAND TOOLING 1 WAY 8 2 WAY 3 WAY Standard IDC 18-24 AWG: WTB INTERCONNECT 00-9176 INSERTION TOOLING REQUIRES HAND PRESS WITH FLAT ROCK PLATES 2 WAY 3 WAY HIGH PRODUCTION Metal No. of Ways 2 3 Max Insulation Dia Ø2.10 Ø1.60 Ø2.10 Ø1.60 Tool Part Number 06 06 06 06 9176 9176 9176 9176 7017 7017 7017 7017 01 02 01 02 002 002 003 003 PCB RESTRICTED AREAS FOR PRESS ASSEMBLY TOOLING 2 WAY 3 WAY NOTES: 1. DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS. 2. MAXIMUM COMPONENT HEIGHT 1.00MM IN THIS AREA. 3. MAXIMUM COMPONENT HEIGHT 6.00MM IN THIS AREA. 4. THE SAME RESTRICTIONS APPLY TO ALL WIRE INSULATION DIAMETERS. 5. 2 AND 3 WAY TOOLS ONLY, FOR USE UNDER HAND PRESS WITH FLAT PLATES. 6. FOR HAND TOOLING REFER TO PAGE 8. 7. ALL DIMENSIONS ±0.20 UNLESS TOLERANCE SPECIFIED. 9 Standard IDC 18-24 AWG: WTB 00-9176 INTERCONNECT HAND INSERTION TOOLING FOR ONE WAY CAP INSERTION CLEARANCE AREA ON PCB FOR HAND TOOLING 10 Standard IDC 18-24 AWG: WTB 00-9176 INTERCONNECT ASSEMBLED CONNECTOR STANDARD CONNECTOR CONNECTOR WITH CAP NOTES: 1. ASSEMBLED HEIGHTS INCLUDE 0.10MM ALLOWANCE FOR PAD AND SOLDER THICKNESS. NO ALLOWANCE HAS BEEN MADE FOR ANY SOLDER RESIST OR OTHER FEATURES. 2. WHEN THE WIRE IS ASSEMBLED THE INSULTATION SHOULD BE TRAPPED BY THESE EDGES. 11