SANKEN ELECTRIC CO., LTD. EM01 1 Scope The present specifications shall apply to Sanken silicon diode, EM01. 2 Outline Type Silicon Rectifier Diode (Mesa type) Structure Resin Molded Applications Commercial Frequency Rectification, etc Flammability: UL94V-0 (Equivalent) 3 絶対最大定格 Absolute maximum ratings No. Item Symbol Unit Rating 1 Transient Peak Reverse Voltage VRSM V 450 2 Peak Reverse Voltage VRM V 400 3 Average Forward Current IF(AV) A 1.0 4 Peak Surge Forward Current IFSM A 45 5 Junction Temperature Tj °C -4 0 to +1 5 0 6 Storage Temperature Tstg °C -4 0 to +1 5 0 Conditions Refer to Derating curve in Section 6 10ms. Half sine wave, one shot 4 Electrical characteristics (Ta=25°C, unless otherwise specified) No. Item Symbol Unit Rating Conditions 1 Forward Voltage Drop VF V 0.97 max. IF=1.0A 2 Reverse Leakage Current IR µA 1 0 max. VR=VRM 3 Reverse Leakage Current Under High Temperature H・IR µA 5 0 max. VR=VRM, Ta=100°C 4 Thermal Resistance Rth(j-l) °C/W 2 0 max. Between Junction and Lead 050107 1/3 61426-01 SANKEN ELECTRIC CO., LTD. EM01 5 VF test and test circuit 6 Derating Derating to the ambient temperature. Power loss generated by voltage is not taken into consideration. 050107 2/3 61426-01 SANKEN ELECTRIC CO., LTD. EM01 7 Package information 7-1 Package type, physical dimensions and material } 0.7 62.3 } 0.2 5.0 } 0.05 Ó0.6 ¦1 0.2 } Ó2.7 ¦3 ¦2 Dimensions in mm *1 The allowance position of Body against the center of whole lead wire is 0.5mm(max.) *2 The centric allowance of lead wire against center of physical body is 0.2mm(max.) *3 The burr may exit up to 2mm from the body of lead 7-2 Appearance The body shall be clean and shall not bear any stain, rust or flaw. 7-3Marking Cathode Mark ①Type number M0 as abbreviated of EM01 ②Class number:- ③Lot number A:Last digit of calendar year B:Month (From 1 to 9 for Jan. to Sep. O for Oct. N for Nov. D for Dec.) ④Ten days (・first ten days,・・second ten days,…third ten days) The type No. VRM rank and Lot No. are to be marked in white. . 050107 3/3 61426-01