SANKEN ELECTRIC CO., LTD. RM10Z １ Scope The present specifications shall apply to Sanken silicon diode, RM10Z. ２ Outline Type Silicon Rectifier Diode (Mesa type) Structure Resin Molded Applications Commercial Frequency Rectification, etc. Flammability : UL94V-0 (Equivalent) ３ Absolute maximum ratings No. Item Symbol Unit Rating Conditions 1 Transient Peak Reverse Voltage VRSM V 250 2 Peak Reverse Voltage VRM V 200 3 Average Forward Current IF(AV) A 1.5 Refer to derating curve in Section 6 4 Peak Surge Forward Current IFSM A 120 10ms. Half sine wave, one shot 5 Junction Temperature Tj °C -40 to +150 6 Storage Temperature Tstg °C -40 to +150 ４ Electrical characteristics (Ta=25°C, unless otherwise specified) No. Item Symbol Unit Rating Conditions 1 Forward Voltage Drop VF V 0.91 max. IF=1.5A 2 Reverse Leakage Current IR µA 10 max. VR=VRM 3 Reverse Leakage Current Under High Temperature H･IR µA 50 max. VR=VRM, Tj=100°C 4 Thermal Resistance Rth(j-l) °C/W 15 max. Between Junction and Lead 040722 1／3 61426-01 SANKEN ELECTRIC CO., LTD. RM10Z ５ 順方向電圧降下測定方法および測定回路 VF test and test circuit ６ Derating Derating to the ambient temperature. Power loss generated by voltage is not taken into consideration. 040722 2／3 61426-01 SANKEN ELECTRIC CO., LTD. RM10Z ７ Package information ７-１ Package type, physical dimensions and material *1 *2 *3 ±0.05 ※1 ※3 ※2 φ0.78 φ4.0 ±0.2 62.5 ±0.7 7.2 ±0.2 Dimensions in mm The allowance position of Body against the center of whole lead wire is 0.5mm(max.) The centric allowance of lead wire against center of physical body is 0.3mm(max.) The burr may exit up to 2mm from the body of lead ７-２ Appearance The body shall be clean and shall not bear any stain, rust or flaw. ７-３ Marking カソード表示 Cathode Mark Cathode Band ① ② ① ③ ② ③ ① Type number：RM10Z ② Lot number 1 First digit: Last digit of Year Second digit: Month From 1 to 9 for Jan. to Sep. O for Oct., N for Nov., and D for Dec. ③ Lot number 2 (ten days) ･ Top of the month ･･ Middle of month ･･･ End of month The color of marking must be white. 040722 3／3 61426-01