SANKEN ELECTRIC CO., LTD. RL2 1. Scope The present specifications shall apply to RL2. 2. Outline Type Silicon Diode Structure Resin Molded Applications Flammability:UL94-V0(Equivalent) High Frequency Rectification, etc. 3. Absolute maximum ratings No. Item Symbol Unit Rating 1 Transient Peak Reverse Voltage VRSM V 400 2 Peak Reverse Voltage VRM V 400 3 Average Forward Current IF(AV) A 2.0 4 Peak Surge Forward Current IFSM A 40 5 I2t Limiting Value I2t A2S 8.0 6 Junction Temperature Tj °C -4 0 ~+1 5 0 7 Storage Temperature Tstg °C -4 0 ~+1 5 0 Conditions Tc=116°C Sinewave 10msec. half sinewave, One shot. 4. Electrical characteristics (Ta=25°C, unless otherwise specified) No. Item Symbol Unit Value Conditions 1 Forward Voltage Drop VF V 1.3 max. IF=2.0A 2 Reverse Leakage Current IR µA 10 max. VR=VRM 3 Reverse Leakage Current Under High Temperature H・IR µA 100 max. Trr-1 ns 50 max. IF=IRP=100mA, Tj=25°C Trr-2 ns 35 max. IF=100mA, IRP=200mA, Tj=25°C 12 max. Between Junction and Lead 4 5 Reverse Recovery Time Thermal Resistance 040304 Rth(j-l) °C /W VR=VRM,Tj=150°C 90%Recovery point 75%Recovery point 1/4 61426-01 SANKEN ELECTRIC CO., LTD. RL2 5. Characteristics IF(AV) - PF 5.0 Tj=150°C 4.5 PF (W) Forward Power Dissipation (W) 4.0 t T 3.5 t/T=1/6 3.0 2.5 t/T=1/3,sinewave 2.0 t/T=1/2 1.5 1.0 DC 0.5 0.0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 IF(AV) (A) Average Forward Current (A) VR - P R 0.035 Tj=150°C PR (W) Reverse Power Dissipation (W) 0.030 t T 0.025 0.020 1-t/T=5/6 0.015 1-t/T=2/3 0.010 1-t/T=1/2 0.005 sinewave 0.000 0 50 100 150 200 250 300 350 400 VR (V) Reverse Voltage (V) 040304 2/4 61426-01 SANKEN ELECTRIC CO., LTD. RL2 Tl - IF(AV) VR=400(V) 2.0 1.8 DC t/T=1/6 IF(AV) (A) Average Forward Current (A) 1.6 t/T=1/3 1.4 sinewave 1.2 1.0 t/T=1/2 0.8 Tj=150°C 0.6 0.4 t T 0.2 0.0 50 60 70 80 90 100 110 120 130 140 150 Tl (°C ) Lead Temperature (°C ) 040304 3/4 61426-01 SANKEN ELECTRIC CO., LTD. RL2 6. Package information 6-1 Package type, physical dimensions and material *1 *2 *3 ※1 ※3 φ0.98±0.05 φ4.0±0.2 62.5±0.7 7.2±0.2 ※2 The allowance position of Body against the center of whole lead wire is 0.5mm(max.) The centric allowance of lead wire against center of physical body is 0.3mm(max.) The burr may exit up to 2mm from the body of lead Dimensions in mm 6-2 Appearance The body shall be clean and shall not bear any stain, rust or flaw. 6-3 Marking ① Type number RL2 ② Lot number 1 First digit: Last digit of Year Second digit: Month From 1 to 9 for Jan. to Sep. O for Oct., N for Nov., and D for Dec. カソード表示 Cathode Band ① ② 040304 ③ Lot number 2 (ten days) ・: Top of the month ・・: Middle of month ・・・: End of month ① ③ ② ③ The Type number and Lot number are to be marked in red. 4/4 61426-01