Heavy Duty Hot Wire CFM Thermo-Anemometer Accurately measures Air Flow (CFM/CMM) or Air velocity plus ºF/ºC Temperature Using the telescoping probe that extends up to 3ft 9940m) long Features: • Air velocity measurements as low as 40ft/min • Telescoping probe is ideal for use in ducts and ventilating systems; extends up to 3ft (940mm) long • Measures air volume in CFM (ft3/min) and CMM (m3/min) plus Temperature simultaneously • Air Flow displayed in 2 modes as an instantaneous value or up to 20 point average • Record/Recall MIN and MAX readings • Super large 1.4" LCD display • Data Hold plus Auto Power Off • Built-in RS-232 PC interface with optional Data Acquisition software and cable • Complete with telescoping probe with 5.5ft (167.6cm) cable, and four AA batteries Optional Data Acquisition Software Optional Battery Operated Datalogger Specifications ft/min MPH knots m/s km/h Temperature Ordering Information: CMM (meter3/min) CFM (feet3/min) Range 40 to 3346ft/min 0.5 to 38.0MPH 0.4 to 33.0knots 0.2 to 17.0m/s 0.7 to 61.2km/h 32 to 122°F 0 to 50°C Range 0 to 36,000m3/min 0 to 1,271,200ft3/min Resolution 1ft/min 0.1MPH 0.1 knots 0.1 m/s 0.1km/h 0.1°F 0.1 °C Resolution 0.001 to 1m3/min 0.01 to 100ft3/min Accuracy (%rdg+digits) ± (5% + 5 digits) ±1.5°F ±0.8°C Area 0.001 to 30.0 m2 0.001 to 322.91 ft2 407119 ........................Heavy Duty Hot Wire CFM Thermo-Anemometer 407119-NIST................407119 with Calibration Traceable to NIST 407001 ........................Data Acquisition program and cable 380340 ........................Battery Operated Datalogger www.extech.com Specifications subject to change without notice. Copyright © 2008-2014 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form. 6/17/14 - R1