PRODUCT DATASHEET AUT600 FLEET Maintenance Kit This special value FLEET Kit is assembled to provide all the automotive testing/ troubleshooting needs for trucks, buses, and RVs with AC auxiliary power systems. 1.2" (30mm) jaw size allows DC Current measurements in tight locations Non-contact quick check for hot spots in automotive applications TRMS functions give accurate readings of AC auxiliary power and battery back up systems Kits Include: • EX505 — Industrial grade, CAT IV-600V, waterproof (IP67), drop-proof multimeter with True RMS functions • • Accessories — Test leads, Type K bead wire probe, Type K to banana input adapter, batteries, and case DC400 — 400A DC mini clamp meter with 1.2" (30mm) jaw opening, ideal for automotive, heavy equipment and marine DC current measurements • 42510 — Mini IR Thermometer for non-contact temperature measurements on surfaces that are too difficult to reach (-58 to 1000°F/-50 to 538°C) Specifications EX505 Range AC/ DC Voltage 1000V Basic Accuracy 0.5% AC/DC Current 10A Resistance 40MΩ Capacitance 100µF Frequency 5Hz to 1kHz (electrical); 0.001Hz to 10MHz (electronic) Temperature -4 to 1382°F (-20 to 750°C) Duty Cycle 0.1 to 99.9% Diode/Continuity Yes Dimensions/ Weight 7.1 x 3.2 x 2.1" (182 x 82 x 55)/ 12.6oz (360g) Ordering AUT600.............. FLEET Test Kit EX505: UL listed, CAT IV & III rating, and IP67 DC400: CAT II rating UPC Code: 793950300602 Specifications subject to change without notice. Copyright © 2013-2015 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form. Rev. 6/12/15 www.extech.com