English Datasheet

PRODUCT DATASHEET
ETK35 Electrical Test Kit with
TRMS AC/DC Clamp Meter
This special value Electrical
Test Kit is assembled with
True RMS Meters to provide
all the electrical testing
needs for installation and
repair of electrical systems,
HVAC equipment, and large
appliances, plus AC/DC
Clamp Meter for automotive
and motor applications.
Kit Includes:
•
Exceptional Value Kit is supplied with test leads,
•
EX205T True RMS Multimeter with Max Hold
•
MA435T True RMS 400A AC/DC Clamp Meter with a
Type K thermocouple bead wire probe, batteries, and
built-in Non-Contact Voltage Detector with LED alert
attractive storage case that provides protection and
and Relative Mode
organization for the meters and accessories
•
1.2" (30mm) jaw size for conductors up to 350MCM
•
Data Hold and Auto Power Off
Specifications
EX205T Range (Max Resolution)
MA435T Range (Max Resolution)
AC Voltage
600V (0.1mV) True RMS
600V (0.1mV) True RMS
DC Voltage
600V (0.1mV)
600V (0.1mV)
AC Current
10.00A (0.1µA) True RMS
400A (0.01A)
DC Current
10.00A (0.1µA)
400A (0.01A)
Resistance
20MΩ (0.1Ω)
20MΩ (0.1Ω)
Frequency
—
10kHz (0.01Hz)
Capacitance
—
100µF (0.01nF)
Temperature
—
-4 to 1400°F/-20 to 760°C (0.1°)
Continuity / Diode
Yes
Yes
Ordering
ETK35................ Electrical Test Kit with True RMS AC/DC Clamp Meter
Specifications subject to change without notice. Copyright © 2013 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form.
Rev. 6/11/13
www.extech.com