Industrial cameras Network components VeriSens MXG02 PROFINET Gateway ® VGA, Industrial Gigabit Ethernet Ethernet, Gateway Monochrome Article number: 11135780 11094926 Features Gateway with integrated PROFINET switch to connect VeriSens via RS485 interface Allows PROFINET implementation in addition to visualization or FTP image transfer Supports PROFINET line topology due to integrated switch Efficient – possible implementation of up to 4 VeriSens PROFINET certified (Version 2.2) Requires VeriSens type VS xxxxxxxxxxxRx (supporting RS485) with software release v2.5.0 or later ® ® ® electrical data 10 … 33V DC (must have the same ground potential as the VeriSens ) The product characteristics and technical data provided do not express or imply any warranty. Technical modifications and errors reserved. voltage supply range + Vs dimension drawing ® power consumption typ. 120 mA, max 150 mA 230 kBit/s standard mounting channel (deep DIN-rail to EN 50022) installation position any weight approx. 150 g 15 5,35 environmental data -25°C … +85°C protection class IP 20 (for switch cabinet use) conformity CE, RoHS 11 35,6 13,6 102,6 113,6 EN / 150924 operating temperature 8 fixation 22,6 35 mechanical data 99 PROFINET I/O, RT-Class 1 (unsynchronized real-time-communikation for the I/O-data exchange), Conformance Class B, integrated switch 22,1 protective functions integrated termination resistor PROFINET 42,3 4,4 transfer rate www.baumer.com Data sheet VeriSens PROFINET Gateway ® page 1/2 Network components VeriSens PROFINET Gateway ® Industrial Ethernet Gateway Article number: 11135780 topology and wiring (trigger) (illumination) (FTP, web-interface, etc.) (Gateway must have the same ground potentials as the VeriSens ) on Tx 422 on off Rx 422 off 1 2 3 4 5 6 7 The product characteristics and technical data provided do not express or imply any warranty. Technical modifications and errors reserved. ® 5 5 electrical connection 1 PLC 2 PROFINET gateway and switch position for activating the resistance for RS485 Pin 4, 6: RS485+ Pin 5, 7: RS485- 3 Pin assignment on the devices (max. 4) Pin 9 (red): RS485+ Pin 12 (red/blue): RS485- 4 Branch lines (AWG26 recommended, thicker cross sections possible, twisted) Max. length of the branch lines for all devices: < 20 m Max. cable length at 230400 baud: 200 m (AWG26 recommended, thicker cross sections possible, twisted, shielded) EN / 150924 5 www.baumer.com Data sheet VeriSens PROFINET Gateway ® page 2/2