Baumer VeriSens-EtherNet-IP-Gateway EN

Industrial
cameras
Network components
VeriSens
MXG02® EtherNet/IP™ Gateway
VGA,
Industrial
Gigabit
Ethernet
Ethernet,
Gateway
Monochrome
Article number: 11148124
11094926
Features
„„Gateway with integrated EtherNet/IP™ switch to connect VeriSens®
via RS485 interface
„„Allows EtherNet/IP™ implementation in addition to visualization or
FTP image transfer
„„Supports EtherNet/IP™ line topology due to integrated switch
„„Efficient – possible implementation of up to 4 VeriSens®
„„Requires VeriSens® type VS xxxxxxxxxxxRx
(supporting RS 485) with software release v2.6.0 or later
electrical data
10 … 33V DC (must have the same ground
potential as the VeriSens®)
The product characteristics and technical data provided do not express or imply any warranty. Technical modifications and errors reserved.
voltage supply
range + Vs
dimension drawing
power consumption typ. 120 mA, max 150 mA
230 kBit/s
42,3
4,4
transfer rate
protective functions integrated termination resistor
weight
22,6
approx. 150 g
35
installation position any
99
standard mounting channel
(deep DIN-rail to EN 50022)
22,1
mechanical data
fixation
-25°C … +85°C
protection class
IP 20 (for switch cabinet use)
conformity
CE, RoHS
15
5,35
11
35,6
13,6
102,6
113,6
EN / 150924
operating
temperature
8
environmental data
www.baumer.com
Data sheet VeriSens® EtherNet/IP™ Gateway
page 1/2
Network components
VeriSens® EtherNet/IP™ Gateway
Industrial Ethernet Gateway
Article number: 11148124
topology and wiring
(trigger)
(illumination)
(FTP, web-interface, etc.)
on
Tx 422
on
off
Rx 422
off
1
2
3
4
5
6
7
The product characteristics and technical data provided do not express or imply any warranty. Technical modifications and errors reserved.
(Gateway must have the same ground potentials as the VeriSens®)
5
5
electrical connection
1
PLC
2
EtherNet/IP™ gateway and switch position for activating the resistance for RS485
Pin 4, 6: RS485+
Pin 5, 7: RS485-
3
Pin assignment on the devices (max. 4)
Pin 9 (red): RS485+
Pin 12 (red/blue): RS485-
4
Branch lines (AWG26 recommended, thicker cross sections possible, twisted)
Max. length of the branch lines for all devices: < 20 m
Max. cable length at 230400 baud: 200 m (AWG26 recommended, thicker cross sections possible, twisted, shielded)
EN / 150924
5
www.baumer.com
Data sheet VeriSens® EtherNet/IP™ Gateway
page 2/2