16-Line Cable Identifier/Tester Kit Identify up to 16 local or installed lines And troubleshoot electrical/electronic circuits Features: • Transmitter/Receiver enables one person to remotely identify up to 16 wires • Wire voltage check from 5 to 16VDC • MultiMeter functions include: AC/DC Voltage and Current, Resistance, Diode, and Continuity • Data Hold and Max Hold • Auto power off • Low battery indicator (transmitter and receiver) • CAT III-600V safety rating • Complete with 16-line Transmitter, MultiMeter/ Receiver, two 9V batteries, pouch case, and 2 AAA batteries Specifications Display Counts Basic Accuracy DC/AC Voltage DC/AC Current Resistance Diode/Continuity Dimensions Weight 2,000 count 1.0% 0.1mV to 600VDC 1mV to 600VAC 0.1μA to 200mA 0.1Ωto 20MΩ Yes 6.3x2.9x1.7"(162x74.5x44mm) 10.8oz (308g) Transmitter Display Test Leads Cable resistance Two red LED lamps 17 alligator clips (16 red and 1 black (ground)) 30kΩ max Receiver Display Test Leads Two digit blue LED display 2 alligator clips (1 red and 1 black) Ordering Information CT40 ................Cable Identifier/Tester Kit www.extech.com Specifications subject to change without notice. 6/23/09 - R1 Copyright © 2009 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.