Specification for a Transmit LC Filter MtronPTI P/N: LF9361 I. General & Electrical Requirements: Lowpass Cutoff Frequency (@ 1dB maximum): 786MHz Notch Filter @ 1.25dB: @ 596MHz & @ 626MHz Rejection Notch Filter: 608MHz to 614MHz: 14dB minimum Lowpass Filter: 940MHz to 960MHz: 40dB minimum 960MHz to 1572MHz: 22dB minimum 1572MHz to 3000MHz: 7dB minimum RF Power: ≤ 2-watts ZS: 50Ω nominal ZL: 75Ω nominal II. Environmental & Physical Requirements: 1. Temperature Range Operating: -30°C to +75°C Storage: -45°C to +90°C 2. Package: SMD (ref. Drawing) 3. Automated Assembly Process Compatible - Pick & Place - Reflow Soldering - Post Reflow Aqueous/Non-aqueous Wash Figure 2: Recommended PAD Layout Drawing Figure 1: SMD Package Outline Drawing Figure 3: Maximum Reflow Solder profile Rev. F 09/18/12 Page 1 of 2 Proprietary Document Information contained herein is proprietary to MtronPTI and is submitted in confidence. Information may not be copied or divulged without written permission from MtronPTI. Specification for a Transmit LC Filter MtronPTI P/N: LF9361 III. Design Simulation Plots: Rev. F 09/18/12 Page 2 of 2 Proprietary Document Information contained herein is proprietary to MtronPTI and is submitted in confidence. Information may not be copied or divulged without written permission from MtronPTI.