;26HULHV [LQFK'RXEOH2&;2'2&;2 +LJKSHUIRUPDQFHVWDELOLW\DQGDJLQJ 'RXEOHRYHQGHVLJQ SSEVWDELOLW\SHUIRUPDQFHRYHUZLGH RSHUDWLQJWHPSHUDWXUH&WR& ([FHOOHQWZDUPXSSHUIRUPDQFH ([FHOOHQWSKDVHQRLVHSHUIRUPDQFH 3DFNDJH¿WVVWDQGDUG(XURIRRWSULQW /RZ³J´YHUVLRQDYDLODEOH 2 & ; 2 Function Tuning Voltage N/C Supply Voltage RF Output Ground/Case Parameters Nominal Frequency Frequency Vs. Temperature Min. FO Electrical Specifications Frequency Vs. Supply Frequency Vs. Aging Allan Deviation Operating Temperature Storage Temperature Environmental Pin 1 2 3 4 5 Typ. 10.000000 -0.1 -0.6 Max. Unit MHz Conditions 0.5 ppb +0.1 +0.6 ppb ppm pk-pk ± 100 mV supply voltage change. For 10 years. For 1 sec. -12 OTR TSTG Warm-Up Time Frequency Adjustment Frequency Adjust Voltage Supply Voltage Turn-On Supply Power Steady State Power Output Type Output Level Output Load Impedance Spurious Content Harmonic Content SSB Phase Noise VS 7 X 10 -40 +75 -55 +105 -8 To be within 2 X 10 at 5min relative to 1 hr. ± 0.8 0 +11.4 +6.0 +12.0 1.7 Sine wave +9.0 50 -95 -132 -155 -158 -160 -160 ± 2.0 +5.0 +12.6 6.0 1.9 +12.0 -70 -20 -90 -125 -148 -155 -158 -158 °C °C ppm VDC VDC W W dBm ȍ dBc dBc dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz @ +25°C. Supply = 12 VDC. Sufficient to cover all tolerances for 10 years. Positive tuning slope. Pin 1 All temperatures In still air at +25°C ± 5% @ 1 Hz offset @ 10 Hz offset @ 100 Hz offset @ 1 kHz offset @ 10 kHz offset @ 100 kHz offset Per MIL-STD-202G, Method 213, Condition A, 50 g peak, half-sine. Survival only with power applied. Per MIL-STD-202G, Method 214, Condition IA (0.02 g2/Hz, 100 Hz to 1000 Hz) Survival only with power applied 1.083” X 1.437” X 0.765” 5-pin through hole Mechanical Shock Mechanical Vibration Package Type 0WURQ37,UHVHUYHVWKHULJKWWRPDNHFKDQJHVWRWKHSURGXFWVDQGVHUYLFHVGHVFULEHGKHUHLQZLWKRXWQRWLFH1ROLDELOLW\LVDVVXPHGDVDUHVXOWRIWKHLUXVHRUDSSOLFDWLRQ 3OHDVHVHHZZZPWURQSWLFRPIRURXUFRPSOHWHRIIHULQJDQGGHWDLOHGGDWDVKHHWV&RQWDFWXVIRU\RXUDSSOLFDWLRQVSHFL¿FUHTXLUHPHQWV0WURQ37,