INCH-POUND MIL-PRF-55681/1F 11 October 2006 SUPERSEDING MIL-PRF-55681/1E 17 February 2000 PERFORMANCE SPECIFICATION SHEET CAPACITORS, CHIP, MULTIPLE LAYER, FIXED, CERAMIC DIELECTRIC, ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, STYLES CDR01, CDR02, CDR03, AND CDR04 This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-PRF-55681. Inches .010 .015 .020 .025 .030 mm 0.25 0.38 0.51 0.64 0.76 Dimensions Style L ± .015 (0.38) W ± .015 (0.38) T Min Max CDR01 .080 (2.03) .050 (1.27) .022 (0.56) .055 (1.40) CDR02 .180 (4.57) .050 (1.27) .022 (0.56) .055 (1.40) CDR03 .180 (4.57) .080 (2.03) .022 (0.56) .080 (2.03) CDR04 .180 (4.57) .125 (3.18) .022 (0.56) .080 (2.03) FIGURE 1. Styles CDR01, CDR02, CDR03, and CDR04 capacitors AMSC N/A DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. FSC 5910 MIL-PRF-55681/1F NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. For style CDR01, termination width shall be .010 inch (0.25 mm), minimum; uncovered band width shall be .030 inch (0.76 mm), minimum. 4. Dimensions and tolerances are for bare chips. For solder coated terminations, for style CDR01 add .020 inch (0.51 mm) to the positive length tolerance and .015 inch (0.38 mm) to the positive width and thickness tolerance. For solder coated terminations for styles CDR02, CDR03, and CDR04, add .025 inch (0.64 mm) to the positive length tolerance and .015 inch (0.38 mm) to the positive width and thickness tolerance. FIGURE 1. Styles CDR01, CDR02, CDR03, and CDR04 capacitors - Continued. REQUIREMENTS: Dimensions and configuration: See figure 1 and table I. Capacitance value: See table I. Capacitance tolerance: J = ±5 percent; K = ±10 percent; M = ±20 percent. See table I. Rated voltage: See table I. Operating temperature range: -55°C to +125°C. Product level designator: Non-established Reliability - C; Established Reliability - M, P, R, and S. Marking: In accordance with MIL-PRF-55681. 2 MIL-PRF-55681/1F TABLE I. CDR01, CDR02, CDR03, and CDR04 capacitors characteristics Part or Identifying Number (PIN) 1/ Capacitance pF Capacitance tolerance Rated temperature and voltagetemperature limits Rated voltage V dc CDR01BP100B - - CDR01BP120BJ - CDR01BP150B - - CDR01BP180BJ - CDR01BP220B - - CDR01BP270BJ - CDR01BP330B - - CDR01BP390BJ - CDR01BP470B - - CDR01BP560BJ - CDR01BP680B - - CDR01BP820BJ - CDR01BP101B - - CDR01B-121B - - CDR01B-151B - - CDR01B-181B - - CDR01BX221B - - CDR01BX271BK - CDR01BX331B - - CDR01BX391BK - CDR01BX471B - - CDR01BX561BK - CDR01BX681B - - CDR01BX821BK - CDR01BX102B - - CDR01BX122BK - CDR01BX152B - - CDR01BX182BK - CDR01BX222B - - CDR01BX272BK - CDR01BX332B - - CDR01BX392AK - CDR01BX472A - - CDR02BP221B - - CDR02BP271BJ - CDR02BX392BK - CDR02BX472B - - CDR02BX562BK - CDR02BX682B - - CDR02BX822BK - CDR02BX103B - - CDR02BX123AK - CDR02BX153A - - CDR02BX183AK - CDR02BX223A - - - 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 220 270 3,900 4,700 5,600 6,800 8,200 10,000 12,000 15,000 18,000 22,000 J, K J J, K J J, K J J, K J J, K J J, K J J, K J, K J, K J, K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M J, K J K K, M K K, M K K, M K K, M K K, M BP BP BP BP BP BP BP BP BP BP BP BP BP BP, BX BP, BX BP, BX BX BX BX BX BX BX BX BX BX BX BX BX BX BX BX BX BX BP BP BX BX BX BX BX BX BX BX BX BX 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 100 100 100 100 100 100 100 100 50 50 50 50 See footnote at end of table. 3 MIL-PRF-55681/1F TABLE I. CDR01, CDR02, CDR03, and CDR04 capacitors characteristics - Continued PIN 1/ Capacitance pF Capacitance tolerance Rated temperature and voltagetemperature limits Rated voltage V dc CDR03BP331B - - CDR03BP391BJ - CDR03BP471B - - CDR03BP561BJ - CDR03BP681B - - CDR03BP821BJ - CDR03BP102B - - CDR03BX123BK - CDR03BX153B - - CDR03BX183BK - CDR03BX223B - - CDR03BX273BK - CDR03BX333B - - CDR03BX393AK - CDR03BX473A - - CDR03BX563AK - CDR03BX683A - - CDR04BP122BJ - CDR04BP152B - - CDR04BP182BJ - CDR04BP222B - - CDR04BP272BJ - CDR04BP332B - - CDR04BX393BK - CDR04BX473B - - CDR04BX563BK - CDR04BX823AK - CDR04BX104A - - CDR04BX124AK - CDR04BX154A - - CDR04BX184AK - - 330 390 470 560 680 820 1,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 1,200 1,500 1,800 2,200 2,700 3,300 39,000 47,000 56,000 82,000 100,000 120,000 150,000 180,000 J, K J J, K J J, K J J, K K K, M K K, M K K, M K K, M K K, M J J, K J J, K J J, K K K, M K K K, M K K, M K BP BP BP BP BP BP BP BX BX BX BX BX BX BX BX BX BX BP BP BP BP BP BP BX BX BX BX BX BX BX BX 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 100 100 100 100 100 100 100 100 100 50 50 50 50 50 1/ Complete PIN shall include additional symbol(s) to indicate voltage-temperature limit (where applicable), capacitance tolerance (where applicable), termination finish, and product level. CHANGES FROM PREVIOUS ISSUE: The margins of this specification sheet are marked with asterisks to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. 4 MIL-PRF-55681/1F Custodians: Army - CR Navy - EC Air Force – 11 DLA – CC Preparing activity: Army - CR Agent: DLA - CC Review activities: Army - MI Navy - AS, MC, OS, SH Air Force - 19, 99 * (Project 5910-2006-047) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil. 5