SKS 2580F B6C 1730 V16 ZU Electrical Characteristics Symbol Conditions min Electrical Data ID Maximum DC current Tamb = 35°C ; No overload Maximum AC voltage (+/-10%) VAC VBUS DC Bus voltage Maximum stack power PTOTAL Stack power loss (TAMBIENT = 35°C) PLOSS Environnmental Data Symbol Thyristor stack Fan Data Three phase controlled rectifier Type VFAN fFAN IFAN PFAN Ordering No. Description 08785001 SKS 2580F B6C 1730 V16 ZU min Stack Protection Symbol • Non-isolated power stacks • SKT 1200/16 • Heatsink N4/250 • Forced air cooling • RC circuit included • Fuses with microswitches • Thermal trip included RC Circuit Type R C VDC kW W typ max 170,1 1 000 IP00 2 RC in parallel with each electrical switch Resistance (80W) typ kg m - VAC 230 50/60 1.1/1.71 250/390 min Unit - SKF N4-230-03 Conditions Unit A VAC 11110726.00.A SEMIKRON fan designation Fan voltage Fan frequency Fan maximum input current Fan power Features max 2 580 500 670 1 730 Mechanical Data SEMIKRON document number.revision.version Drawing Approximate total weight Weight Installation altitude without derating Altitude IEC 60529 Protection Pollution Degree EN 50178 SEMISTACK® CLASSICS - B6C Preliminary Data Conditions typ Hz A W max Unit 33 0.47 Ohm µF 33 1 800 A V kA²s Fuses Size IN RMS UN Typical Applications I²t • Regulated power supplies • Alternator excitation • Motor control 1 fuse per switch, with microswitches Caliber Nominal voltage (IEC) Total at Un at room temperature (approx. 20…25°C ) Bimetal Thermal Trip TS Switching temperature over which thermal trip is open ITC MAX Maximum permissible current at 240VAC at 30VDC 600 3 870 80 1 3 °C A A Remarks This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee, expressed or implied, is made regarding delivery, performance or suitability. B6C © by SEMIKRON Rev.01 - 06.08.2015 1 SKS 2580F B6C 1730 V16 ZU Dimensions This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee expressed or implied is made regarding delivery, performance or suitability. © by SEMIKRON Rev.01 - 06.08.2015 2