SKS 970F B6HK 650 V16 Electrical Characteristics Symbol Conditions min Electrical Data TAMBIENT = 35°C ; No overload ID Maximum DC current VAC Maximum AC voltage (+/-10%) VBUS DC Bus voltage PTOTAL Maximum stack power Stack power loss (TAMBIENT = 35°C) PLOSS Environnmental Data Symbol Thyristor/Diode Module stack Fan Data Three phase half-controlled rectifier Type VFAN fFAN IFAN PFAN Ordering No. Description 08800508 SKS 970F B6HK 650 V16 min Stack Protection Symbol • Isolated power stacks • SKKH 570/16 • Heatsink P16/300 • Forced air cooling • RC circuit included • Thermal trip included RC Circuit Type R C Typical Applications typ max 1 000 230 50/60 0.60/0.68 135/154 min at 240VAC at 30VDC typ Unit kg m - SKF 16A-230-11 RC in parallel with each electrical switch Resistance (11W) Maximum permissible current kW W IP00 2 Bimetal Thermal Trip TS Switching temperature over which thermal trip is open ITC MAX VDC 21.3 Conditions Unit A VAC 10061112.00.B SEMIKRON fan designation Fan voltage Fan frequency Fan maximum input current Fan power Features max 970 500 670 650 Mechanical Data SEMIKRON document number.revision.version Drawing Approximate total weight Weight Installation altitude without derating Altitude IEC 60529 Protection Pollution degree EN 50178 SEMISTACK® CLASSICS - B6HK Preliminary Data Conditions typ VAC Hz A W max Unit RC SMPK 5 100 0.22 Ohm µF 100 1 3 °C A A • Soft charge • Industrial heating Remarks This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee, expressed or implied, is made regarding delivery, performance or suitability. B6HK © by SEMIKRON Rev. 0 - 21.12.2012 1 SKS 970F B6HK 650 V16 Dimensions This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee expressed or implied is made regarding delivery, performance or suitability. © by SEMIKRON Rev. 0 - 21.12.2012 2