SKS 2580F B6C 1730 V16 Electrical Characteristics Symbol Conditions min Electrical Data TAMBIENT = 35°C ; No overload ID Maximum DC current VAC Maximum AC voltage (+/-10%) VBUS DC Bus voltage PTOTAL Maximum stack power Stack power loss (TAMBIENT = 35°C) PLOSS Environnmental Data Symbol Thyristor Presspack stack Fan Data Three phase controlled rectifier Type VFAN fFAN IFAN PFAN Ordering No. Description 08785000 SKS 2580F B6C 1730 V16 min Stack Protection Symbol • Non-isolated power stacks • SKT 1200/16 • Heatsink N4/250 • Forced air cooling • RC circuit included • Thermal trip included RC Circuit Type R C Typical Applications typ max 1 000 at 240VAC at 30VDC typ kg m - VAC 230 50/60 1.1/1.71 250/390 min Unit - SKF N4-230-03 RC in parallel with each electrical switch Resistance (80W) Maximum permissible current kW W IP00 2 Bimetal Thermal Trip TS Switching temperature over which thermal trip is open ITC MAX VDC 143.1 Conditions Unit A VAC 93041500.02.A SEMIKRON fan designation Fan voltage Fan frequency Fan maximum input current Fan power Features max 2 580 500 670 1 730 Mechanical Data SEMIKRON document number.revision.version Drawing Approximate total weight Weight Installation altitude without derating Altitude IEC 60529 Protection Pollution Degree EN 50178 SEMISTACK® CLASSICS - B6C Preliminary Data Conditions typ Hz A W max Unit 33 0.47 Ohm µF 80 1 3 °C A A • Regulated power supplies • Alternator excitation • Motor control Remarks This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee, expressed or implied, is made regarding delivery, performance or suitability. B6C © by SEMIKRON Rev. 1 - 06.08.2015 1 SKS 2580F B6C 1730 V16 Dimensions This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee expressed or implied is made regarding delivery, performance or suitability. © by SEMIKRON Rev. 1 - 06.08.2015 2