SKS 2300F B6U 1540 V16 ZU Electrical Characteristics Symbol Conditions min Electrical Data TAMBIENT = 35°C ; No overload ID Maximum DC current VAC Maximum AC voltage (+/-10%) VBUS DC Bus voltage Maximum stack power PTOTAL Stack power loss (TAMBIENT = 35°C) PLOSS Environnmental Data Symbol Diode Presspack stack Fan Data Three phase uncontrolled rectifier Type VFAN fFAN IFAN PFAN Ordering No. Description 08785103 SKS 2300F B6U 1540 V16 ZU • Non-isolated power stacks • SKN 1500/16 • Heatsink P18/180 • Forced air cooling • RC circuit included • Fuses with microswitches • Thermal trip included Typical Applications A VAC VDC kW W typ max 12061802.00 90.4 1 000 IP00 2 typ kg m - VAC 230 50/60 1.1/1.71 250/390 min Unit - SKF N4-230-03 Conditions Unit Hz A W max Unit RC Circuit Type R C RC in parallel with bridge rectifier Resistance (80W) 33 0.47 Ohm µF 33 1 600 A V kA²s Fuses Size IN RMS UN I²t • Power supplies • Rectifier for AC/DC motor control min SEMIKRON fan designation Fan voltage Fan frequency Fan maximum input current Fan power Stack Protection Symbol Features max 2 300 500 670 1 540 Mechanical Data SEMIKRON document number.revision.version Drawing Approximate total weight Weight Installation altitude without derating Altitude IEC 60529 Protection Pollution degree EN 50178 SEMISTACK® CLASSICS - B6U Preliminary Data Conditions typ 1 fuse per switch, with microswitches Caliber Nominal voltage (IEC) Total at Un at room temperature (approx. 20…25°C ) Bimetal Thermal Trip TS Switching temperature over which thermal trip is open ITC MAX Maximum permissible current at 240VAC at 30VDC 600 2 900 110 1 3 °C A A Remarks This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee, expressed or implied, is made regarding delivery, performance or suitability. B6U © by SEMIKRON Rev. 1 - 06.08.2015 1 SKS 2300F B6U 1540 V16 ZU Dimensions This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee expressed or implied is made regarding delivery, performance or suitability. © by SEMIKRON Rev. 1 - 06.08.2015 2