Compact Digital Multimeters + NCV Built-in Non-contact Voltage Detector Non-contact Voltage Detector quickly checks for the presence of voltage from 100 to 600VAC Features: • 0.5% basic accuracy • Over-sized high contrast LCD display • Double molded housing • CAT III-600V • Complete with test leads, general purpose Type K bead wire probe (MN47), 9V battery, and carrying case MN42: • Manual ranging • 2000 count display • 1.5V and 9V Battery tests MN47: • Autoranging with manual override • 4000 count display • AC Current, Capacitance, Frequency, Temperature, and Duty Cycle • Relative and Data Hold functions Measure Capacitance Non-contact Voltage Detection Ordering Information: CAT III rated MultiMeter functions Specifications Ranging Display counts Basic Accuracy NC Voltage Detector DC Voltage AC Voltage DC Current AC Current Resistance Capacitance Frequency Temperature Duty Cycle Diode/Continuity Battery Test Dimensions Weight MN42 MN47 Manual Autoranging 2000 4000 0.5% 0.5% 100 to 600VAC 100 to 600VAC 600V (0.1mV) 600V (0.1mV) 600V (0.1V) 600V (0.1mV) 10A (1μA) 10A (0.1μA) — 10A (0.1μA) 2MΩ (0.1Ω) 40MΩ (0.1Ω) — 100μF (1pF) — 10MHz (0.001Hz) — 1400°F (760°C) — 0.1 to 99.9% Yes Yes 1.5V / 9V — 5.9 x 2.75 x 1.8” (150 x 70 x 48mm) 9oz (255g) MN42 ............Manual Ranging MultiMeter + Voltage Detector MN47 ............Autoranging MultiMeter with Temp + Voltage Detector www.extech.com Specifications subject to change without notice. 4/1/11 - R1 Copyright © 2009-2011 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.