200A Mini Clamp Meters + Non-contact Voltage Detector Clamp meters with built-in AC NCV Voltage detector + flashlight 200A mini clamp meters increase use safety by including a built-in voltage detector in the jaw tip. The user can now detect the presence of live voltages before using the meter. Common Features: • 0.7" (18mm) jaw opening; 300MCM cable size • Built-in AC non-contact Voltage (NCV) detector (120/240VAC, 50/60Hz) • LCD backlit display • Built-in white LED flashlight • Auto Power Off • Complete with two AAA batteries and soft case MA120 Additional Features: • Measures AC/DC Current and Frequency • Data Hold and Zero function MA150 Additional Features: • Measures DC Current, AC/DC Voltage, and Resistance • Diode and Continuity test • Max hold function Bright LED Flashlight Specifications AC Current Max Resolution Accuracy DC Current Max Resolution Accuracy AC Voltage Max Resolution DC Voltage Max Resolution Resistance Max Resolution Accuracy Frequency Max Resolution Dimensions Weight Built-in non-contact voltage (NCV) detector via clamp tip MA120 200A 100mA MA150 200A 100mA ±3.0% ±2.5% 200A 0.1A ±3% Non-contact — — — 1kHz 0.01Hz 7x2.5x1.3" (178x65x32mm) 6 oz (170g) Non-contact/600V 0.1mV 600V 0.1mV 20MΩ 0.1Ω ±3.0% — 7x2.5x1.3" (178x65x32mm) 6 oz (170g) Ordering Information: MA120 ............200A AC/DC Mini Clamp Meter with Non-Contact Voltage Detector MA120-NIST ....MA120 with Certification of Calibration Traceable to NIST MA150 ............200A AC Mini Clamp Meter with Non-Contact Voltage Detector MA150-NIST ....MA150 with Certification of Calibration Traceable to NIST www.extech.com Specifications subject to change without notice. Copyright © 2007-2012 FLIR Systems. All rights reserved including the right of reproduction in whole or in part in any form. 9/25/12 - R1