THJ Series with Extension to 200ºC High Temperature Tantalum Chip Capacitor FEATURES • SMD 200ºC tantalum capacitor • 200°C @ 0.33VR 1000hrs continuous operation • Leakage current after 200ºC 1000hrs less than 1mA • 3x reflow 260°C • Gold plated termination for hybrid assembly • Oil drilling, aerospace, automotive applications • CV range: 10-220µF / 10-16V • 2 case sizes available LEAD-FREE COMPATIBLE COMPONENT APPLICATIONS • Downhole drilling CASE DIMENSIONS: millimeters (inches) Code MARKING EIA Code W+0.20 (0.008) –0.10 (0.004) H+0.20 (0.008) –0.10 (0.004) W1±0.20 (0.008) A+0.30 (0.012) –0.20 (0.008) S Min. 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055) E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) W1 dimension applies to the termination width for A dimensional area only. HOW TO ORDER THJ E 107 Case Size See table above L±0.20 (0.008) B B, E CASE Type EIA Metric Capacitance Code pF code: 1st two digits represent significant figures 3rd digit represents multiplier (number of zeros to follow) * 016 # JH — Tolerance K = ±10% M = ±20% Rated DC Voltage 010 = 10Vdc 016 = 16Vdc 050 = 50Vdc Packaging A = Gold Plating 7" Reel B = Gold Plating 13" Reel Standard Suffix Additional characters may be added for special requirements V = Dry pack Option TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL @ VR 25ºC Leakage Current DCL @ VC 200ºC, 1000 hrs Rated Voltage (VR) ⱕ +85°C: Category Voltage (VC) ⱕ +200°C: Surge Voltage (Vs) ⱕ +85°C: Surge Voltage (Vs) ⱕ +200°C: Temperature Range: Reliability: Termination Finished: 164 All technical data relate to an ambient temperature of +25°C 6.8 µF to 220 µF ±10%; ±20% 0.01CV 1mA 10 16 50 3.3 5.3 17 13 20 63 4.3 6.5 21 -55ºC up 200ºC with voltage derating 0.5% per 1000 hours at 85ºC, VR with 0.1Ω/V series impedance, 1000 hrs at 200ºC, 0.33VR Gold Plating Meets requirements of AEC-Q200 032316 THJ Series with Extension to 200ºC High Temperature Tantalum Chip Capacitor CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance μF Code 6.8 685 10 106 15 156 22 226 33 336 47 476 68 686 100 107 150 157 220 227 Rated voltage (VR ) to 85°C (Voltage Code) 16V (C) 25V (E) 35V (V) 10V (A) B E* E* 50V (T) E* E* E* E* E E Available Ratings Engineering samples - please contact manufacturer *Codes under development - subject to change Note: Voltage ratings are minimum values. AVX reserves the right to supply higher ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE AVX Part No. Case Capacitance Size (μF) Rated Voltage (V) DCL DCL ESR Rated Category Category Max. DF Max. Temperature Voltage Temperature MSL @ VC 200ºC Max. Max. @ V @ 100kHz 25ºC R (ºC) (V) (ºC) 1000 hrs (%) (μA) (Ω) (mA) THJE227*010#JH E 220 10 85 THJB106*016#JH THJE107*016#JH B E 10 100 16 16 85 85 10 Volt @ 85°C 200 22 16 Volt @ 85°C 5.3 200 1.6 5.3 200 16 3.3 100kHz RMS Current (mA) 25ºC 85ºC 175ºC 200ºC 1.0 10 0.25 11) 812 731 162 81 1.0 1.0 6 8 2.8 0.25 1 11) 174 812 157 731 35 162 17 81 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All PNs also available with Dry pack option - MSL 3 (see How to order). 1) –Dry pack option (see How to order) recommended for reduction of stress during soldering. Base terminations material is copper for E case size and Nilo42 for B case size. All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. For typical weight and composition see page 223. NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. 032316 165 THJ Series with Extension to 200ºC High Temperature Tantalum Chip Capacitor QUALIFICATION TABLE TEST THJ 200ºC series (Temperature range -55ºC to +200ºC) Characteristics Visual examination no visible damage Determine after application of rated voltage for 2000 +48/-0 hours at 85±2ºC and then leaving 1-2 hours at DCL 1.25 x initial limit room temperature. Also determine of 200ºC temperaΔC/C within ±10% of initial value ture, category voltage for 2000 +48/-0 hours and DF initial limit then leaving 1-2 hours at room temperature. Power supply impedance to be ≤0.1Ω/V. ESR 1.25 x initial limit Visual examination no visible damage DCL 1.25 x initial limit 200ºC, 0V, 2000h ΔC/C within ±10% of initial value DF initial limit ESR 1.25 x initial limit Visual examination no visible damage DCL 2 x initial limit Determine after leaving for 1000 hours at 85±2ºC, 85% relative humidity and rated voltage and then ΔC/C within ±10% of initial value recovery 1-2 hours at room temperature. DF 1.2 x initial limit ESR 1.25 x initial limit Condition Endurance Storage Life Biased Humidity Temperature Stability Step 1 2 3 4 5 6 Temperature°C +20±2 -55+0/-3 +20±2 +85+3/-0 +200+3/-0 +20±2 Duration(min) 15 15 15 15 15 15 Test temperature: 200ºC+3/0ºC Test voltage: 1.3 x category voltage at 200ºC Series protection resistance 1000±100Ω Discharge resistance: 1000Ω Number of cycles: 1000x Cycle duration: 6 min; 30 sec charge, 5 min 30 sec discharge Surge Voltage DCL ΔC/C DF +20ºC -55ºC IL* n/a n/a +0/-10% IL* 1.5 x IL* +20ºC +125ºC +200ºC +20ºC IL* 10 x IL* 12.5 x IL* IL* ±5% +10/-0% +18/-0% ±5% IL* 1.5 x IL* 2 x IL* IL* ESR 1.25 x IL* 2.5 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* Visual examination no visible damage DCL initial limit ΔC/C within ±5% of initial value DF initial limit ESR 1.25 x initial limit *Initial Limit THJ 200°C Voltage vs Temperature Rating 120% 100% 100% 100% 100% 80% 80% 60% Rated range 66% 50% 40% 33% 20% 0% -55°C 166 0°C 40°C 60°C 85°C 105°C 125°C 175°C 200°C 032316