TLN PulseCapTM Series High Capacitance Tantalum Solid Electrolytic Chip Capacitors Undertab Series FEATURES • Large case size for maximum capacitance • 3x reflow 260°C compatible • Low profile solution • Consumer applications (e.g. PCMCIA/USB wireless express cards etc.) • CV range: 1000-3300μF / 4-10V • 2 case sizes available LEAD-FREE COMPATIBLE COMPONENT APPLICATIONS • Data transfer modems • SSD backup circuits CASE DIMENSIONS: millimeters (inches) Code EIA Code EIA Metric L±0.20 (0.008) W+0.20 (0.008) -0.10 (0.004) H max. WP±0.10 (0.004) WN±0.10 (0.004) AP±0.10 (0.004) AN±0.10 (0.004) S Min. 4 2924 7361-20 7.30 (0.287) 6.10 (0.240) 2.00 (0.079) 4.75 (0.187) 4.75 (0.187) 2.00 (0.079) 3.20 (0.126) 2.10 (0.083) 6 5831 14878-20 14.80 (0.583) 7.80 (0.307) 2.00 (0.079) 5.50 (0.217) 5.50 (0.217) 2.45 (0.096) 2.45 (0.096) 9.90 (0.390) W1 dimension applies to the termination width for A dimensional area only. MARKING 4, 6 CASE Capacitance Value in mF 228 = 2.2mF 228 J Polarity Band (Anode+) XXXXX W AVX LOGO ID Code HOW TO ORDER TLN 6 Type Polarity Band (Anode+) Rated Voltage J = 6.3V Case Size See table above L W H WP AP S AN WN 228 M 006 Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier Tolerance M = ±20% Rated DC Voltage 004 = 4Vdc 006 = 6.3Vdc 010 = 10Vdc R Packaging R = Pure Tin 7" Reel 0055 ESR in mΩ TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Rated Voltage (VR) Category Voltage (VC) Category Voltage (VC) Temperature Range: Reliability: 64 -55°C ⱕ +40°C: at 85°C: at 125°C: All technical data relate to an ambient temperature of +25°C 1000 μF to 3300 μF ±20% 0.01CV 4 6.3 10 2 3.2 5 0.8 1.3 2 -55°C to +125°C with category voltage 0.2% per 1000 hours at 85°C, 0.5xVR with 0.1Ω/V series impedance with 60% confidence level 061516 TLN PulseCapTM Series High Capacitance Tantalum Solid Electrolytic Chip Capacitors Undertab Series CAPACITANCE AND RATED VOLTAGE RANGE (FIGURE DENOTES CASE SIZE) Capacitance μF 680 1000 1500 2200 3300 Voltage Rating DC (VR ) to 85°C Code 687 108 158 228 338 4V (G) 6.3V (J) 6(55) 4(100) 6(55) 6* 10V (A) 4(100)/6(55) 6(55) Available Ratings (ESR ratings in mOhms in brackets) Engineering samples - please contact manufacturer *Codes under development – subject to change Note: Voltage ratings are minimum values. AVX reserves the right to supply higher ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE AVX Part No. Case Capacitance Size (μF) Rated Voltage (V) Rated Category Category Temperature Voltage Temperature (ºC) (V) (ºC) TLN6338M004#0055 6 3300 4 40 TLN4158M006#0100 TLN6228M006#0055 4 6 1500 2200 6.3 6.3 40 40 TLN4108M010#0100 TLN6108M010#0055 TLN6158M010#0055 4 6 6 1000 1000 1500 10 10 10 40 40 40 4 Volt @ 40°C 0.8 125 6.3 Volt @ 40°C 1.3 125 1.3 125 10 Volt @ 40°C 2 125 2 125 2 125 DCL Max. (μA) ESR Max. @ 100kHz (mΩ) MSL 132 55 90 132 100 100 150 100kHz RMS Current (mA) 25ºC 85ºC 125ºC 3 2045 1840 818 100 55 3 3 1285 2045 1156 1840 514 818 100 55 55 3 3 3 1285 2045 2045 1156 1840 1840 514 818 818 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalogue limit post mounting DCL allowed to move up to 2.00 times catalogue limit post mounting For typical weight and composition see page 223. NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. 061516 65 TLN PulseCapTM Series High Capacitance Tantalum Solid Electrolytic Chip Capacitors Undertab Series QUALIFICATION TABLE TEST Endurance Humidity Temperature Stability TLN PulseCapTM series (Temperature range -55ºC to +125ºC) Condition Characteristics Determine after application of rated voltage for Visual examination no visible damage 2000 +48/-0 hours at 40±2ºC and then leaving 1-2 DCL 2 x initial limit hours at room temperature. Also determine of 85ºC temperature, category voltage for 2000 +48/-0 ΔC/C within +5/-30% of initial value hours and then leaving 1-2 hours at room temperature. Power supply impedance to be ≤0.1Ω/V. ESR 1.25 x initial limit Visual examination no visible damage Determine after storage without applied voltage DCL 2 x initial limit at 65±2ºC and 90-95% relative humidity for 500 hours and then recovery 1-2 hours at room ΔC/C within ±10% of initial value temperature. ESR 1.25 x initial limit Step 1 2 3 4 5 6 Temperature°C +20±2 -55+0/-3 +20±2 +85+3/-0 +125+3/-0 +20±2 Duration(min) 15 15 15 15 15 15 Test temperature: 40ºC+3/0ºC Test voltage: 1.3 x rated voltage Series protection resistance 1000±100Ω Discharge resistance: 1000Ω Number of cycles: 1000x Cycle duration: 6 min; 30 sec charge, 5 min 30 sec discharge Surge Voltage DCL ΔC/C ESR +20ºC -55ºC +20ºC +85ºC 2 x IL* n/a 2 x IL* 20 x IL* 25 x IL* 2 x IL* n/a +5/-20% ±10% +20/-0% +25/-0% ±10% 1.25 x IL* 2.5 x IL* +125ºC +20ºC 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* Visual examination no visible damage DCL 2 x initial limit ΔC/C within ±5% of initial value ESR 1.25 x initial limit *Initial Limit Voltage vs Temperature Rating 120% rated range recommended derating 100% 80% 100% 100% 80% 80% 60% 67% 50% 40% 33% 20% 0% -55°C 66 20% 0°C 40°C 60°C 85°C 105°C 125°C 061516