6A05G thru 6A10G Glass Passivated Junction Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 6.0 Amperes Features Low forward voltage drop High current capability High reliability High surge current capability Mechanical Data Case: Molded plastic R-6 Epoxy: UL 94V-O rate flame retardant Lead: Axial leads, solderable per MIL-STD-202, Method 208 guaranteed Polarity: Color band denotes cathode end High temperature soldering guaranteed: 250oC/10 seconds .375” (9.5mm) lead lengths at 5 lbs., (2.3kg) tension Weight: 0.074 ounce, 2.105 grams Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Symbols 6A05G 6A1G 6A2G 6A4G Maximum repetitive peak reverse voltage VRRM 50 100 200 Maximum RMS voltage VRMS 35 70 140 Maximum DC blocking voltage V DC 50 100 200 Maximum average forward rectified current 0.375" (9.5mm) lead length @TA=50oC I(AV) 6.0 Amps Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 400.0 Amps Maximum instantaneous forward voltage @ 6.0A VF Maximum DC reverse current at rated DC blocking voltage @TA=25oC @TA=125oC 6A6G 6A8G 6A10G 400 600 800 1000 Volts 280 420 560 700 Volts 400 600 800 1000 Volts 1.1 IR 1.0 Units Volts 10.0 100 uA pF Typical junction capacitance (Note 1) CJ 100 Operating junction temperature range TJ -55 to +150 o C -55 to +150 o C Storage temperature range Notes: TSTG 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C. 43 RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 44