RL201G thru RL207G Glass Passivated Junction Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 2.0 Amperes Features Low forward voltage drop High current capability High reliability High surge current capability Mechanical Data Case: Molded plastic DO-204AC(DO-15) Epoxy: UL 94V-O rate flame retardant Lead: Axial leads, solderable per MIL-STD-202, Method 208 guaranteed Polarity: Color band denotes cathode end High temperature soldering guaranteed: 250oC/10 seconds .375” (9.5mm) lead lengths at 5 lbs., (2.3kg) tension Weight: 0.014 ounce, 0.395 gram Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Symbols RL201G RL202G RL203G RL204G Maximum repetitive peak reverse voltage VRRM 50 100 200 Maximum RMS voltage VRMS 35 70 140 Maximum DC blocking voltage V DC 50 100 200 Maximum average forward rectified current 0.375" (9.5mm) lead length @TA=60oC I(AV) 2.0 Amps Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 55.0 Amps Maximum instantaneous forward voltage @ 2.0A VF 1.1 Volts IR 5.0 100 uA pF Maximum DC reverse current at rated DC blocking voltage @TA=25oC @TA=125oC RL205G RL206G RL207G Units 400 600 800 1000 Volts 280 420 560 700 Volts 400 600 800 1000 Volts Typical junction capacitance (Note 1) CJ 30 Operating junction temperature range TJ -55 to +150 o C -55 to +150 o C Operating and storage temperature range Notes: TSTG 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C. 35 RATINGS AND CHARACTERISTIC CURVES 36