DR200G thru DR210G Glass Passivated Junction Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 2.0 Amperes Features Glass passivated chip High current capability High reliability Low reverse current Low forward voltage drop Mechanical Data Case: Molded plastic DO-204AC(DO-15) Epoxy: UL 94V-O rate flame retardant Lead: Axial leads, solderable per MIL-STD-202, Method 208 guaranteed Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.014 ounce, 0.395 gram Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Symbols DR200G DR201G DR202G DR204G DR206G DR208G DR210G Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage V DC 50 100 200 400 600 800 1000 Maximum average forward current 0.375" (9.5mm) lead length TA=50oC IF(AV) 2.0 Amps Peak forward surge current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) IFSM 50.0 Amps Maximum forward voltage at IF=2.0 Amps. VF 1.1 Volts IR 5.0 300 uA CJ 40 Maximum DC reverse current at rated DC blocking voltage Typical junction capacitance (Note 1) Typical thermal resistance (Note2) Operating junction temperature range Storage temperature range Notes: @TA=25oC @TA=100oC Volts pF o RθJA 25 TJ -55 to +150 o C -55 to +150 o C TSTG 1. Measured at 1.0 MHz and applied reverse voltage of 4.0VDC 2. Thermal resistance from Junction to Ambient at 0.375" (9.5mm) Lead Lengths, P.C. Board Mounted. 33 C/W RATINGS AND CHARACTERISTIC CURVES 34